[INFO] crate bswap 1.0.0 is already in cache
[INFO] checking bswap-1.0.0 against master#209b2be09fcaff937480d1fbbe8b31646e361c7a for pr-70917
[INFO] extracting crate bswap 1.0.0 into /workspace/builds/worker-2/source
[INFO] validating manifest of crates.io crate bswap 1.0.0 on toolchain 209b2be09fcaff937480d1fbbe8b31646e361c7a
[INFO] running `"/workspace/cargo-home/bin/cargo" "+209b2be09fcaff937480d1fbbe8b31646e361c7a" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started tweaking crates.io crate bswap 1.0.0
[INFO] finished tweaking crates.io crate bswap 1.0.0
[INFO] tweaked toml for crates.io crate bswap 1.0.0 written to /workspace/builds/worker-2/source/Cargo.toml
[INFO] running `"/workspace/cargo-home/bin/cargo" "+209b2be09fcaff937480d1fbbe8b31646e361c7a" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/workspace/cargo-home/bin/cargo" "+209b2be09fcaff937480d1fbbe8b31646e361c7a" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"docker" "create" "-v" "/var/lib/crater-agent-workspace/builds/worker-2/target:/opt/rustwide/target:rw,Z" "-v" "/var/lib/crater-agent-workspace/builds/worker-2/source:/opt/rustwide/workdir:ro,Z" "-v" "/var/lib/crater-agent-workspace/cargo-home:/opt/rustwide/cargo-home:ro,Z" "-v" "/var/lib/crater-agent-workspace/rustup-home:/opt/rustwide/rustup-home:ro,Z" "-e" "SOURCE_DIR=/opt/rustwide/workdir" "-e" "MAP_USER_ID=0" "-e" "CARGO_TARGET_DIR=/opt/rustwide/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/rustwide/cargo-home" "-e" "RUSTUP_HOME=/opt/rustwide/rustup-home" "-w" "/opt/rustwide/workdir" "-m" "1610612736" "--network" "none" "rustops/crates-build-env" "/opt/rustwide/cargo-home/bin/cargo" "+209b2be09fcaff937480d1fbbe8b31646e361c7a" "check" "--frozen" "--all" "--all-targets"`
[INFO] [stderr] WARNING: Your kernel does not support swap limit capabilities or the cgroup is not mounted. Memory limited without swap.
[INFO] [stdout] 51c187d48b28c47cb24d562959161b48275132953a03e6b9056fb3080d75829a
[INFO] running `"docker" "start" "-a" "51c187d48b28c47cb24d562959161b48275132953a03e6b9056fb3080d75829a"`
[INFO] [stderr]     Checking bswap v1.0.0 (/opt/rustwide/workdir)
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:119:21
[INFO] [stderr]     |
[INFO] [stderr] 119 |                 b'A'...b'F' => buf |= byte - b'A' + 10,
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr]     |
[INFO] [stderr]     = note: `#[warn(ellipsis_inclusive_range_patterns)]` on by default
[INFO] [stderr] 
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:120:21
[INFO] [stderr]     |
[INFO] [stderr] 120 |                 b'a'...b'f' => buf |= byte - b'a' + 10,
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr] 
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:121:21
[INFO] [stderr]     |
[INFO] [stderr] 121 |                 b'0'...b'9' => buf |= byte - b'0',
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 634 | pub mod beu16 { mod_std_impls!(be, u16, 2, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: `#[warn(deprecated)]` on by default
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 638 | pub mod beu32 { mod_std_impls!(be, u32, 4, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 646 | pub mod beu64 { mod_std_impls!(be, u64, 8, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 648 | pub mod leu16 { mod_std_impls!(le, u16, 2, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 652 | pub mod leu32 { mod_std_impls!(le, u32, 4, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 660 | pub mod leu64 { mod_std_impls!(le, u64, 8, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::error::Error::description': use the Display impl or to_string()
[INFO] [stderr]    --> src/lib.rs:100:34
[INFO] [stderr]     |
[INFO] [stderr] 100 |             write!(f, "{}", self.description())
[INFO] [stderr]     |                                  ^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] error[E0432]: unresolved import `test`
[INFO] [stderr]  --> src/tests.rs:2:5
[INFO] [stderr]   |
[INFO] [stderr] 2 | use test::Bencher;
[INFO] [stderr]   |     ^^^^
[INFO] [stderr]   |     |
[INFO] [stderr]   |     unresolved import
[INFO] [stderr]   |     help: a similar path exists: `tests::test`
[INFO] [stderr] 
[INFO] [stderr] error[E0433]: failed to resolve: could not find `bytes` in `slice`
[INFO] [stderr]    --> src/tests.rs:159:19
[INFO] [stderr]     |
[INFO] [stderr] 159 |     ::std::slice::bytes::copy_memory(&mut dst, src);
[INFO] [stderr]     |                   ^^^^^ could not find `bytes` in `slice`
[INFO] [stderr] 
[INFO] [stderr] error[E0433]: failed to resolve: could not find `bytes` in `slice`
[INFO] [stderr]    --> src/tests.rs:188:19
[INFO] [stderr]     |
[INFO] [stderr] 188 |     ::std::slice::bytes::copy_memory(&mut dst, src);
[INFO] [stderr]     |                   ^^^^^ could not find `bytes` in `slice`
[INFO] [stderr] 
[INFO] [stderr] error[E0433]: failed to resolve: could not find `bytes` in `slice`
[INFO] [stderr]    --> src/tests.rs:218:19
[INFO] [stderr]     |
[INFO] [stderr] 218 |     ::std::slice::bytes::copy_memory(&mut dst, src);
[INFO] [stderr]     |                   ^^^^^ could not find `bytes` in `slice`
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u16`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::u16`
[INFO] [stderr] ...
[INFO] [stderr] 303 | qc_byte_order!(prop_u16, u16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u16`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::u16`
[INFO] [stderr] ...
[INFO] [stderr] 303 | qc_byte_order!(prop_u16, u16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u16`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::u16`
[INFO] [stderr] ...
[INFO] [stderr] 303 | qc_byte_order!(prop_u16, u16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u16`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::u16`
[INFO] [stderr] ...
[INFO] [stderr] 303 | qc_byte_order!(prop_u16, u16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i16`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::i16`
[INFO] [stderr] ...
[INFO] [stderr] 304 | qc_byte_order!(prop_i16, i16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i16`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::i16`
[INFO] [stderr] ...
[INFO] [stderr] 304 | qc_byte_order!(prop_i16, i16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i16`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::i16`
[INFO] [stderr] ...
[INFO] [stderr] 304 | qc_byte_order!(prop_i16, i16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i16`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::i16`
[INFO] [stderr] ...
[INFO] [stderr] 304 | qc_byte_order!(prop_i16, i16, u16, beu16, leu16);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u32`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::u32`
[INFO] [stderr] ...
[INFO] [stderr] 305 | qc_byte_order!(prop_u32, u32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u32`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::u32`
[INFO] [stderr] ...
[INFO] [stderr] 305 | qc_byte_order!(prop_u32, u32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u32`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::u32`
[INFO] [stderr] ...
[INFO] [stderr] 305 | qc_byte_order!(prop_u32, u32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u32`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::u32`
[INFO] [stderr] ...
[INFO] [stderr] 305 | qc_byte_order!(prop_u32, u32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i32`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::i32`
[INFO] [stderr] ...
[INFO] [stderr] 306 | qc_byte_order!(prop_i32, i32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i32`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::i32`
[INFO] [stderr] ...
[INFO] [stderr] 306 | qc_byte_order!(prop_i32, i32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i32`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::i32`
[INFO] [stderr] ...
[INFO] [stderr] 306 | qc_byte_order!(prop_i32, i32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i32`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::i32`
[INFO] [stderr] ...
[INFO] [stderr] 306 | qc_byte_order!(prop_i32, i32, u32, beu32, leu32);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u64`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::u64`
[INFO] [stderr] ...
[INFO] [stderr] 307 | qc_byte_order!(prop_u64, u64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u64`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::u64`
[INFO] [stderr] ...
[INFO] [stderr] 307 | qc_byte_order!(prop_u64, u64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u64`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::u64`
[INFO] [stderr] ...
[INFO] [stderr] 307 | qc_byte_order!(prop_u64, u64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::u64`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::u64`
[INFO] [stderr] ...
[INFO] [stderr] 307 | qc_byte_order!(prop_u64, u64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i64`
[INFO] [stderr]    --> src/tests.rs:282:81
[INFO] [stderr]     |
[INFO] [stderr] 282 |                     super::super::$bemod::encode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..], n as $ty_uint);
[INFO] [stderr]     |                                                                                 ^^^^^ not found in `std::i64`
[INFO] [stderr] ...
[INFO] [stderr] 308 | qc_byte_order!(prop_i64, i64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i64`
[INFO] [stderr]    --> src/tests.rs:283:86
[INFO] [stderr]     |
[INFO] [stderr] 283 |                     n == super::super::$bemod::decode(&mut buf[(8 - (::std::$ty_int::BYTES as usize))..]) as $ty_int
[INFO] [stderr]     |                                                                                      ^^^^^ not found in `std::i64`
[INFO] [stderr] ...
[INFO] [stderr] 308 | qc_byte_order!(prop_i64, i64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i64`
[INFO] [stderr]    --> src/tests.rs:293:79
[INFO] [stderr]     |
[INFO] [stderr] 293 |                     super::super::$lemod::encode(&mut buf[..((::std::$ty_int::BYTES as usize))], n as $ty_uint);
[INFO] [stderr]     |                                                                               ^^^^^ not found in `std::i64`
[INFO] [stderr] ...
[INFO] [stderr] 308 | qc_byte_order!(prop_i64, i64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error[E0425]: cannot find value `BYTES` in module `std::i64`
[INFO] [stderr]    --> src/tests.rs:294:84
[INFO] [stderr]     |
[INFO] [stderr] 294 |                     n == super::super::$lemod::decode(&mut buf[..((::std::$ty_int::BYTES as usize))]) as $ty_int
[INFO] [stderr]     |                                                                                    ^^^^^ not found in `std::i64`
[INFO] [stderr] ...
[INFO] [stderr] 308 | qc_byte_order!(prop_i64, i64, u64, beu64, leu64);
[INFO] [stderr]     | ------------------------------------------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: possible candidates are found in other modules, you can import them into scope:
[INFO] [stderr]             u16::BYTES
[INFO] [stderr]             u24::BYTES
[INFO] [stderr]             u32::BYTES
[INFO] [stderr]             u40::BYTES
[INFO] [stderr]             u48::BYTES
[INFO] [stderr]             u56::BYTES
[INFO] [stderr]             u64::BYTES
[INFO] [stderr]             u8::BYTES
[INFO] [stderr]     = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] error: use of unstable library feature 'test': `bench` is a part of custom test frameworks which are unstable
[INFO] [stderr]   --> src/tests.rs:77:3
[INFO] [stderr]    |
[INFO] [stderr] 77 | #[bench]
[INFO] [stderr]    |   ^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: `#[deny(soft_unstable)]` on by default
[INFO] [stderr]    = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
[INFO] [stderr]    = note: for more information, see issue #64266 <https://github.com/rust-lang/rust/issues/64266>
[INFO] [stderr] 
[INFO] [stderr] error: use of unstable library feature 'test': `bench` is a part of custom test frameworks which are unstable
[INFO] [stderr]   --> src/tests.rs:93:3
[INFO] [stderr]    |
[INFO] [stderr] 93 | #[bench]
[INFO] [stderr]    |   ^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
[INFO] [stderr]    = note: for more information, see issue #64266 <https://github.com/rust-lang/rust/issues/64266>
[INFO] [stderr] 
[INFO] [stderr] error: use of unstable library feature 'test': `bench` is a part of custom test frameworks which are unstable
[INFO] [stderr]    --> src/tests.rs:109:3
[INFO] [stderr]     |
[INFO] [stderr] 109 | #[bench]
[INFO] [stderr]     |   ^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
[INFO] [stderr]     = note: for more information, see issue #64266 <https://github.com/rust-lang/rust/issues/64266>
[INFO] [stderr] 
[INFO] [stderr] error: use of unstable library feature 'test': `bench` is a part of custom test frameworks which are unstable
[INFO] [stderr]    --> src/tests.rs:125:3
[INFO] [stderr]     |
[INFO] [stderr] 125 | #[bench]
[INFO] [stderr]     |   ^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
[INFO] [stderr]     = note: for more information, see issue #64266 <https://github.com/rust-lang/rust/issues/64266>
[INFO] [stderr] 
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:119:21
[INFO] [stderr]     |
[INFO] [stderr] 119 |                 b'A'...b'F' => buf |= byte - b'A' + 10,
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr]     |
[INFO] [stderr]     = note: `#[warn(ellipsis_inclusive_range_patterns)]` on by default
[INFO] [stderr] 
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:120:21
[INFO] [stderr]     |
[INFO] [stderr] 120 |                 b'a'...b'f' => buf |= byte - b'a' + 10,
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr] 
[INFO] [stderr] warning: `...` range patterns are deprecated
[INFO] [stderr]    --> src/lib.rs:121:21
[INFO] [stderr]     |
[INFO] [stderr] 121 |                 b'0'...b'9' => buf |= byte - b'0',
[INFO] [stderr]     |                     ^^^ help: use `..=` for an inclusive range
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 634 | pub mod beu16 { mod_std_impls!(be, u16, 2, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: `#[warn(deprecated)]` on by default
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 638 | pub mod beu32 { mod_std_impls!(be, u32, 4, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 646 | pub mod beu64 { mod_std_impls!(be, u64, 8, from_be, to_be, "big", "little"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 648 | pub mod leu16 { mod_std_impls!(le, u16, 2, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 652 | pub mod leu32 { mod_std_impls!(le, u32, 4, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::mem::uninitialized': use `mem::MaybeUninit` instead
[INFO] [stderr]    --> src/lib.rs:596:35
[INFO] [stderr]     |
[INFO] [stderr] 596 |                 let mut tmp: $T = mem::uninitialized();
[INFO] [stderr]     |                                   ^^^^^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 660 | pub mod leu64 { mod_std_impls!(le, u64, 8, from_le, to_le, "little", "big"); }
[INFO] [stderr]     |                 ------------------------------------------------------------ in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
[INFO] [stderr] 
[INFO] [stderr] warning: use of deprecated item 'std::error::Error::description': use the Display impl or to_string()
[INFO] [stderr]    --> src/lib.rs:100:34
[INFO] [stderr]     |
[INFO] [stderr] 100 |             write!(f, "{}", self.description())
[INFO] [stderr]     |                                  ^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to 32 previous errors
[INFO] [stderr] 
[INFO] [stderr] Some errors have detailed explanations: E0425, E0432, E0433.
[INFO] [stderr] For more information about an error, try `rustc --explain E0425`.
[INFO] [stderr] error: could not compile `bswap`.
[INFO] [stderr] 
[INFO] [stderr] To learn more, run the command again with --verbose.
[INFO] running `"docker" "inspect" "51c187d48b28c47cb24d562959161b48275132953a03e6b9056fb3080d75829a"`
[INFO] running `"docker" "rm" "-f" "51c187d48b28c47cb24d562959161b48275132953a03e6b9056fb3080d75829a"`
[INFO] [stdout] 51c187d48b28c47cb24d562959161b48275132953a03e6b9056fb3080d75829a
