Nov 28 12:18:52.399 INFO documenting lpc13xx-0.0.0 against try#f5a0bd723553ea4b7556bd7087b9f0919cafb483 for pr-55318 Nov 28 12:18:52.399 INFO running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/pr-55318/worker-4/try#f5a0bd723553ea4b7556bd7087b9f0919cafb483:/target:rw,Z" "-v" "/mnt/big/crater/work/local/test-source/worker-4/pr-55318/try#f5a0bd723553ea4b7556bd7087b9f0919cafb483:/source:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/source" "-e" "USER_ID=1000" "-e" "CMD=cargo +f5a0bd723553ea4b7556bd7087b9f0919cafb483-alt doc --frozen --no-deps --document-private-items" "-e" "CARGO_TARGET_DIR=/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTDOCFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/cargo-home" "-e" "RUSTUP_HOME=/rustup-home" "-m" "1536M" "--network" "none" "crater"` Nov 28 12:18:52.687 INFO [stdout] 8a06c7e8b0f6972645763826c41978a7c8da2fff89845bd476e7f6d63961a49a Nov 28 12:18:52.689 INFO running `"docker" "start" "-a" "8a06c7e8b0f6972645763826c41978a7c8da2fff89845bd476e7f6d63961a49a"` Nov 28 12:18:53.215 INFO [stderr] usermod: no changes Nov 28 12:18:53.314 INFO [stderr] Documenting lpc13xx v0.0.0 (/source) Nov 28 12:19:03.039 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.040 INFO [stderr] --> src/lib.rs:1645:295 Nov 28 12:19:03.041 INFO [stderr] | Nov 28 12:19:03.042 INFO [stderr] 1645 | #[doc = "When this bit is set, the I2C module may exercise the same control over the clock line that it would in normal operation. This means that, acting as a slave peripheral, the I2C module can stretch the clock line (hold it low) until it has had time to respond to an I2C interrupt.[1]"] Nov 28 12:19:03.042 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.043 INFO [stderr] | Nov 28 12:19:03.044 INFO [stderr] note: lint level defined here Nov 28 12:19:03.044 INFO [stderr] --> src/lib.rs:7:9 Nov 28 12:19:03.045 INFO [stderr] | Nov 28 12:19:03.045 INFO [stderr] 7 | #![deny(warnings)] Nov 28 12:19:03.046 INFO [stderr] | ^^^^^^^^ Nov 28 12:19:03.047 INFO [stderr] = note: #[deny(intra_doc_link_resolution_failure)] implied by #[deny(warnings)] Nov 28 12:19:03.047 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.048 INFO [stderr] Nov 28 12:19:03.049 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.049 INFO [stderr] --> src/lib.rs:1796:295 Nov 28 12:19:03.050 INFO [stderr] | Nov 28 12:19:03.051 INFO [stderr] 1796 | #[doc = "When this bit is set, the I2C module may exercise the same control over the clock line that it would in normal operation. This means that, acting as a slave peripheral, the I2C module can stretch the clock line (hold it low) until it has had time to respond to an I2C interrupt.[1]"] Nov 28 12:19:03.051 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.052 INFO [stderr] | Nov 28 12:19:03.053 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.053 INFO [stderr] Nov 28 12:19:03.054 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.055 INFO [stderr] --> src/lib.rs:1827:295 Nov 28 12:19:03.055 INFO [stderr] | Nov 28 12:19:03.056 INFO [stderr] 1827 | #[doc = "When this bit is set, the I2C module may exercise the same control over the clock line that it would in normal operation. This means that, acting as a slave peripheral, the I2C module can stretch the clock line (hold it low) until it has had time to respond to an I2C interrupt.[1]"] Nov 28 12:19:03.057 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.057 INFO [stderr] | Nov 28 12:19:03.058 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.058 INFO [stderr] Nov 28 12:19:03.062 INFO [stderr] error: `[5]` cannot be resolved, ignoring it... Nov 28 12:19:03.062 INFO [stderr] --> src/lib.rs:4298:129 Nov 28 12:19:03.063 INFO [stderr] | Nov 28 12:19:03.064 INFO [stderr] 4298 | #[doc = "Bit 1 - Interrupt Enable. Enables the THRE interrupt for UART. The status of this interrupt can be read from LSR[5]."] Nov 28 12:19:03.064 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.065 INFO [stderr] | Nov 28 12:19:03.065 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.066 INFO [stderr] Nov 28 12:19:03.067 INFO [stderr] error: `[4:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.067 INFO [stderr] --> src/lib.rs:4307:141 Nov 28 12:19:03.068 INFO [stderr] | Nov 28 12:19:03.068 INFO [stderr] 4307 | #[doc = "Bit 2 - Line Interrupt Enable. Enables the UART RX line status interrupts. The status of this interrupt can be read from LSR[4:1]."] Nov 28 12:19:03.069 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.070 INFO [stderr] | Nov 28 12:19:03.070 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.071 INFO [stderr] Nov 28 12:19:03.072 INFO [stderr] error: `[5]` cannot be resolved, ignoring it... Nov 28 12:19:03.072 INFO [stderr] --> src/lib.rs:4352:129 Nov 28 12:19:03.073 INFO [stderr] | Nov 28 12:19:03.073 INFO [stderr] 4352 | #[doc = "Bit 1 - Interrupt Enable. Enables the THRE interrupt for UART. The status of this interrupt can be read from LSR[5]."] Nov 28 12:19:03.074 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.075 INFO [stderr] | Nov 28 12:19:03.075 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.076 INFO [stderr] Nov 28 12:19:03.077 INFO [stderr] error: `[4:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.077 INFO [stderr] --> src/lib.rs:4357:141 Nov 28 12:19:03.078 INFO [stderr] | Nov 28 12:19:03.079 INFO [stderr] 4357 | #[doc = "Bit 2 - Line Interrupt Enable. Enables the UART RX line status interrupts. The status of this interrupt can be read from LSR[4:1]."] Nov 28 12:19:03.079 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.080 INFO [stderr] | Nov 28 12:19:03.081 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.081 INFO [stderr] Nov 28 12:19:03.082 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.083 INFO [stderr] --> src/lib.rs:4567:56 Nov 28 12:19:03.083 INFO [stderr] | Nov 28 12:19:03.084 INFO [stderr] 4567 | #[doc = "Bit 0 - Interrupt status. Note that IIR[0] is active low. The pending interrupt can be determined by evaluating IIR[3:1]."] Nov 28 12:19:03.084 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.085 INFO [stderr] | Nov 28 12:19:03.086 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.086 INFO [stderr] Nov 28 12:19:03.087 INFO [stderr] error: `[3:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.088 INFO [stderr] --> src/lib.rs:4567:132 Nov 28 12:19:03.088 INFO [stderr] | Nov 28 12:19:03.089 INFO [stderr] 4567 | #[doc = "Bit 0 - Interrupt status. Note that IIR[0] is active low. The pending interrupt can be determined by evaluating IIR[3:1]."] Nov 28 12:19:03.089 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.090 INFO [stderr] | Nov 28 12:19:03.091 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.091 INFO [stderr] Nov 28 12:19:03.092 INFO [stderr] error: `[3:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.093 INFO [stderr] --> src/lib.rs:4576:57 Nov 28 12:19:03.093 INFO [stderr] | Nov 28 12:19:03.094 INFO [stderr] 4576 | #[doc = "Bits 1:3 - Interrupt identification. IER[3:1] identifies an interrupt corresponding to the UART Rx FIFO. All other combinations of IER[3:1] not listed below are reserved (100,101,111)."] Nov 28 12:19:03.095 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.095 INFO [stderr] | Nov 28 12:19:03.096 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.096 INFO [stderr] Nov 28 12:19:03.097 INFO [stderr] error: `[3:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.098 INFO [stderr] --> src/lib.rs:4576:151 Nov 28 12:19:03.098 INFO [stderr] | Nov 28 12:19:03.099 INFO [stderr] 4576 | #[doc = "Bits 1:3 - Interrupt identification. IER[3:1] identifies an interrupt corresponding to the UART Rx FIFO. All other combinations of IER[3:1] not listed below are reserved (100,101,111)."] Nov 28 12:19:03.100 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.100 INFO [stderr] | Nov 28 12:19:03.101 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.101 INFO [stderr] Nov 28 12:19:03.102 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.103 INFO [stderr] --> src/lib.rs:4585:60 Nov 28 12:19:03.103 INFO [stderr] | Nov 28 12:19:03.103 INFO [stderr] 4585 | #[doc = "Bits 6:7 - These bits are equivalent to FCR[0]."] Nov 28 12:19:03.103 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.105 INFO [stderr] | Nov 28 12:19:03.105 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.105 INFO [stderr] Nov 28 12:19:03.106 INFO [stderr] error: `[7:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.106 INFO [stderr] --> src/lib.rs:4643:73 Nov 28 12:19:03.107 INFO [stderr] | Nov 28 12:19:03.107 INFO [stderr] 4643 | #[doc = "Active high enable for both UART Rx and TX FIFOs and FCR[7:1] access. This bit must be set for proper UART operation. Any transition on this bit will automatically clear the UART FIFOs."] Nov 28 12:19:03.107 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.108 INFO [stderr] | Nov 28 12:19:03.108 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.108 INFO [stderr] Nov 28 12:19:03.109 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.110 INFO [stderr] --> src/lib.rs:4701:41 Nov 28 12:19:03.110 INFO [stderr] | Nov 28 12:19:03.110 INFO [stderr] 4701 | #[doc = "Writing a logic 1 to FCR[1] will clear all bytes in UART Rx FIFO, reset the pointer logic. This bit is self-clearing."] Nov 28 12:19:03.110 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[2]` cannot be resolved, ignoring it... Nov 28 12:19:03.115 INFO [stderr] --> src/lib.rs:4759:41 Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] 4759 | #[doc = "Writing a logic 1 to FCR[2] will clear all bytes in UART TX FIFO, reset the pointer logic. This bit is self-clearing."] Nov 28 12:19:03.115 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[7:1]` cannot be resolved, ignoring it... Nov 28 12:19:03.115 INFO [stderr] --> src/lib.rs:4674:73 Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] 4674 | #[doc = "Active high enable for both UART Rx and TX FIFOs and FCR[7:1] access. This bit must be set for proper UART operation. Any transition on this bit will automatically clear the UART FIFOs."] Nov 28 12:19:03.115 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.115 INFO [stderr] --> src/lib.rs:4732:41 Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] 4732 | #[doc = "Writing a logic 1 to FCR[1] will clear all bytes in UART Rx FIFO, reset the pointer logic. This bit is self-clearing."] Nov 28 12:19:03.115 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[2]` cannot be resolved, ignoring it... Nov 28 12:19:03.115 INFO [stderr] --> src/lib.rs:4790:41 Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] 4790 | #[doc = "Writing a logic 1 to FCR[2] will clear all bytes in UART TX FIFO, reset the pointer logic. This bit is self-clearing."] Nov 28 12:19:03.115 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[1:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.115 INFO [stderr] --> src/lib.rs:5024:40 Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] 5024 | #[doc = "2 stop bits (1.5 if LCR[1:0]=00)."] Nov 28 12:19:03.115 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.115 INFO [stderr] | Nov 28 12:19:03.115 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.115 INFO [stderr] Nov 28 12:19:03.115 INFO [stderr] error: `[6]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:5174:93 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 5174 | #[doc = "Enable break transmission. Output pin UART TXD is forced to logic 0 when LCR[6] is active high."] Nov 28 12:19:03.116 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.116 INFO [stderr] error: `[1:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:5333:40 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 5333 | #[doc = "2 stop bits (1.5 if LCR[1:0]=00)."] Nov 28 12:19:03.116 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.116 INFO [stderr] error: `[6]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:5515:93 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 5515 | #[doc = "Enable break transmission. Output pin UART TXD is forced to logic 0 when LCR[6] is active high."] Nov 28 12:19:03.116 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.116 INFO [stderr] error: `[1:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:5364:40 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 5364 | #[doc = "2 stop bits (1.5 if LCR[1:0]=00)."] Nov 28 12:19:03.116 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.116 INFO [stderr] error: `[6]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:5546:93 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 5546 | #[doc = "Enable break transmission. Output pin UART TXD is forced to logic 0 when LCR[6] is active high."] Nov 28 12:19:03.116 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.116 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.116 INFO [stderr] --> src/lib.rs:6569:54 Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] 6569 | #[doc = "RBR contains no UART RX errors or FCR[0]=0."] Nov 28 12:19:03.116 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.116 INFO [stderr] | Nov 28 12:19:03.116 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.116 INFO [stderr] Nov 28 12:19:03.127 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.127 INFO [stderr] --> src/lib.rs:6619:49 Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] 6619 | #[doc = "Bit 0 - Receiver Data Ready. LSR[0] is set when the RBR holds an unread character and is cleared when the UART RBR FIFO is empty."] Nov 28 12:19:03.127 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.127 INFO [stderr] Nov 28 12:19:03.127 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.127 INFO [stderr] --> src/lib.rs:6628:118 Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] 6628 | #[doc = "Bit 1 - Overrun Error. The overrun error condition is set as soon as it occurs. A LSR read clears LSR[1]. LSR[1] is set when UART RSR has a new character assembled and the UART RBR FIFO is full. In this case, the UART RBR FIFO will not be overwritten and the character in the UART RSR will be lost."] Nov 28 12:19:03.127 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.127 INFO [stderr] Nov 28 12:19:03.127 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.127 INFO [stderr] --> src/lib.rs:6628:126 Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] 6628 | #[doc = "Bit 1 - Overrun Error. The overrun error condition is set as soon as it occurs. A LSR read clears LSR[1]. LSR[1] is set when UART RSR has a new character assembled and the UART RBR FIFO is full. In this case, the UART RBR FIFO will not be overwritten and the character in the UART RSR will be lost."] Nov 28 12:19:03.127 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.127 INFO [stderr] | Nov 28 12:19:03.127 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.127 INFO [stderr] Nov 28 12:19:03.127 INFO [stderr] error: `[2]` cannot be resolved, ignoring it... Nov 28 12:19:03.127 INFO [stderr] --> src/lib.rs:6637:150 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 6637 | #[doc = "Bit 2 - Parity Error. When the parity bit of a received character is in the wrong state, a parity error occurs. A LSR read clears LSR[2]. Time of parity error detection is dependent on FCR[0]. Note: A parity error is associated with the character at the top of the UART RBR FIFO."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:6637:205 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 6637 | #[doc = "Bit 2 - Parity Error. When the parity bit of a received character is in the wrong state, a parity error occurs. A LSR read clears LSR[2]. Time of parity error detection is dependent on FCR[0]. Note: A parity error is associated with the character at the top of the UART RBR FIFO."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[3]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:6646:141 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 6646 | #[doc = "Bit 3 - Framing Error. When the stop bit of a received character is a logic 0, a framing error occurs. A LSR read clears LSR[3]. The time of the framing error detection is dependent on FCR0. Upon detection of a framing error, the RX will attempt to re-synchronize to the data and assume that the bad stop bit is actually an early start bit. However, it cannot be assumed that the next received byte will be correct even if there is no Framing Error. Note: A framing error is associated with the character at the top of the UART RBR FIFO."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:6655:378 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 6655 | #[doc = "Bit 4 - Break Interrupt. When RXD1 is held in the spacing state (all zeros) for one full character transmission (start, data, parity, stop), a break interrupt occurs. Once the break condition has been detected, the receiver goes idle until RXD1 goes to marking state (all ones). A LSR read clears this status bit. The time of break detection is dependent on FCR[0]. Note: The break interrupt is associated with the character at the top of the UART RBR FIFO."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[7]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:6682:46 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 6682 | #[doc = "Bit 7 - Error in RX FIFO. LSR[7] is set when a character with a RX error such as framing error, parity error or break interrupt, is loaded into the RBR. This bit is cleared when the LSR register is read and there are no subsequent errors in the UART FIFO."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:7026:106 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 7026 | #[doc = "Bit 4 - Clear To Send State. Complement of input signal CTS. This bit is connected to MCR[1] in modem loopback mode."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:7036:107 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 7036 | #[doc = "Bit 5 - Data Set Ready State. Complement of input signal DSR. This bit is connected to MCR[0] in modem loopback mode."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[2]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:7046:99 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 7046 | #[doc = "Bit 6 - Ring Indicator State. Complement of input RI. This bit is connected to MCR[2] in modem loopback mode."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[3]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:7056:105 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 7056 | #[doc = "Bit 7 - Data Carrier Detect State. Complement of input DCD. This bit is connected to MCR[3] in modem loopback mode."] Nov 28 12:19:03.128 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.128 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.128 INFO [stderr] --> src/lib.rs:9180:125 Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] 9180 | #[doc = "0x3c - External Match Register (EMR). The EMR controls the match function and the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.128 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.128 INFO [stderr] | Nov 28 12:19:03.128 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.128 INFO [stderr] Nov 28 12:19:03.129 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.129 INFO [stderr] --> src/lib.rs:9185:117 Nov 28 12:19:03.129 INFO [stderr] | Nov 28 12:19:03.129 INFO [stderr] 9185 | #[doc = "0x74 - PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.129 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.129 INFO [stderr] | Nov 28 12:19:03.129 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.129 INFO [stderr] Nov 28 12:19:03.130 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.130 INFO [stderr] --> src/lib.rs:12166:114 Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] 12166 | #[doc = "External Match Register (EMR). The EMR controls the match function and the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.130 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.130 INFO [stderr] Nov 28 12:19:03.130 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.130 INFO [stderr] --> src/lib.rs:13310:106 Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] 13310 | #[doc = "PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.130 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.130 INFO [stderr] Nov 28 12:19:03.130 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.130 INFO [stderr] --> src/lib.rs:9708:172 Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] 9708 | #[doc = "Bit 1 - When one, the Timer Counter and the Prescale Counter are synchronously reset on the next positive edge of PCLK. The counters remain reset until TCR[1] is returned to zero."] Nov 28 12:19:03.130 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.130 INFO [stderr] Nov 28 12:19:03.130 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.130 INFO [stderr] --> src/lib.rs:9736:172 Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] 9736 | #[doc = "Bit 1 - When one, the Timer Counter and the Prescale Counter are synchronously reset on the next positive edge of PCLK. The counters remain reset until TCR[1] is returned to zero."] Nov 28 12:19:03.130 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.130 INFO [stderr] | Nov 28 12:19:03.130 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.130 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11413:75 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11413 | #[doc = "Bit 2 - Stop on MR0: the TC and PC will be stopped and TCR[0] will be set to 0 if MR0 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.143 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11440:75 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11440 | #[doc = "Bit 5 - Stop on MR1: the TC and PC will be stopped and TCR[0] will be set to 0 if MR1 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.143 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11467:75 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11467 | #[doc = "Bit 8 - Stop on MR2: the TC and PC will be stopped and TCR[0] will be set to 0 if MR2 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.143 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11494:76 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11494 | #[doc = "Bit 11 - Stop on MR3: the TC and PC will be stopped and TCR[0] will be set to 0 if MR3 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.143 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11526:75 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11526 | #[doc = "Bit 2 - Stop on MR0: the TC and PC will be stopped and TCR[0] will be set to 0 if MR0 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.143 INFO [stderr] Nov 28 12:19:03.143 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.143 INFO [stderr] --> src/lib.rs:11541:75 Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] 11541 | #[doc = "Bit 5 - Stop on MR1: the TC and PC will be stopped and TCR[0] will be set to 0 if MR1 matches the TC."] Nov 28 12:19:03.143 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.143 INFO [stderr] | Nov 28 12:19:03.143 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.144 INFO [stderr] Nov 28 12:19:03.144 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.144 INFO [stderr] --> src/lib.rs:11556:75 Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] 11556 | #[doc = "Bit 8 - Stop on MR2: the TC and PC will be stopped and TCR[0] will be set to 0 if MR2 matches the TC."] Nov 28 12:19:03.144 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.144 INFO [stderr] Nov 28 12:19:03.144 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.144 INFO [stderr] --> src/lib.rs:11571:76 Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] 11571 | #[doc = "Bit 11 - Stop on MR3: the TC and PC will be stopped and TCR[0] will be set to 0 if MR3 matches the TC."] Nov 28 12:19:03.144 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.144 INFO [stderr] Nov 28 12:19:03.144 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.144 INFO [stderr] --> src/lib.rs:12170:114 Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] 12170 | #[doc = "External Match Register (EMR). The EMR controls the match function and the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.144 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.144 INFO [stderr] Nov 28 12:19:03.144 INFO [stderr] error: `[5:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.144 INFO [stderr] --> src/lib.rs:12886:270 Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] 12886 | #[doc = "Bit 0 - External Match 0. This bit reflects the state of output CT16B0_MAT0/CT16B1_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT16B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.144 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.144 INFO [stderr] | Nov 28 12:19:03.144 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.144 INFO [stderr] Nov 28 12:19:03.145 INFO [stderr] error: `[7:6]` cannot be resolved, ignoring it... Nov 28 12:19:03.145 INFO [stderr] --> src/lib.rs:12896:270 Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] 12896 | #[doc = "Bit 1 - External Match 1. This bit reflects the state of output CT16B0_MAT1/CT16B1_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT16B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.145 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.145 INFO [stderr] Nov 28 12:19:03.145 INFO [stderr] error: `[9:8]` cannot be resolved, ignoring it... Nov 28 12:19:03.145 INFO [stderr] --> src/lib.rs:12906:262 Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] 12906 | #[doc = "Bit 2 - External Match 2. This bit reflects the state of output match channel 2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. Note that on counter/timer 0 this match channel is not pinned out. This bit is driven to the CT16B1_MAT2 pin if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.145 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.145 INFO [stderr] Nov 28 12:19:03.145 INFO [stderr] error: `[11:10]` cannot be resolved, ignoring it... Nov 28 12:19:03.145 INFO [stderr] --> src/lib.rs:12916:213 Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] 12916 | #[doc = "Bit 3 - External Match 3. This bit reflects the state of output of match channel 3. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. There is no output pin available for this channel on either of the 16-bit timers."] Nov 28 12:19:03.145 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.145 INFO [stderr] Nov 28 12:19:03.145 INFO [stderr] error: `[5:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.145 INFO [stderr] --> src/lib.rs:12975:270 Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] 12975 | #[doc = "Bit 0 - External Match 0. This bit reflects the state of output CT16B0_MAT0/CT16B1_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT16B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.145 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.145 INFO [stderr] | Nov 28 12:19:03.145 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.145 INFO [stderr] Nov 28 12:19:03.151 INFO [stderr] error: `[7:6]` cannot be resolved, ignoring it... Nov 28 12:19:03.151 INFO [stderr] --> src/lib.rs:12980:270 Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] 12980 | #[doc = "Bit 1 - External Match 1. This bit reflects the state of output CT16B0_MAT1/CT16B1_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT16B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.151 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.151 INFO [stderr] Nov 28 12:19:03.151 INFO [stderr] error: `[9:8]` cannot be resolved, ignoring it... Nov 28 12:19:03.151 INFO [stderr] --> src/lib.rs:12985:262 Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] 12985 | #[doc = "Bit 2 - External Match 2. This bit reflects the state of output match channel 2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. Note that on counter/timer 0 this match channel is not pinned out. This bit is driven to the CT16B1_MAT2 pin if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.151 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.151 INFO [stderr] Nov 28 12:19:03.151 INFO [stderr] error: `[11:10]` cannot be resolved, ignoring it... Nov 28 12:19:03.151 INFO [stderr] --> src/lib.rs:12990:213 Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] 12990 | #[doc = "Bit 3 - External Match 3. This bit reflects the state of output of match channel 3. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. There is no output pin available for this channel on either of the 16-bit timers."] Nov 28 12:19:03.151 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.151 INFO [stderr] | Nov 28 12:19:03.151 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.151 INFO [stderr] Nov 28 12:19:03.152 INFO [stderr] error: `[2:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.152 INFO [stderr] --> src/lib.rs:13314:106 Nov 28 12:19:03.152 INFO [stderr] | Nov 28 12:19:03.152 INFO [stderr] 13314 | #[doc = "PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT16B0_MAT[2:0]."] Nov 28 12:19:03.152 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.152 INFO [stderr] | Nov 28 12:19:03.152 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.152 INFO [stderr] Nov 28 12:19:03.159 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.159 INFO [stderr] --> src/lib.rs:13916:125 Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] 13916 | #[doc = "0x3c - External Match Register (EMR). The EMR controls the match function and the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.159 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.159 INFO [stderr] Nov 28 12:19:03.159 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.159 INFO [stderr] --> src/lib.rs:13921:117 Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] 13921 | #[doc = "0x74 - PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.159 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.159 INFO [stderr] Nov 28 12:19:03.159 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.159 INFO [stderr] --> src/lib.rs:16902:114 Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] 16902 | #[doc = "External Match Register (EMR). The EMR controls the match function and the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.159 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.159 INFO [stderr] Nov 28 12:19:03.159 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.159 INFO [stderr] --> src/lib.rs:18046:106 Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] 18046 | #[doc = "PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.159 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.159 INFO [stderr] Nov 28 12:19:03.159 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.159 INFO [stderr] --> src/lib.rs:14444:172 Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] 14444 | #[doc = "Bit 1 - When one, the Timer Counter and the Prescale Counter are synchronously reset on the next positive edge of PCLK. The counters remain reset until TCR[1] is returned to zero."] Nov 28 12:19:03.159 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.159 INFO [stderr] | Nov 28 12:19:03.159 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.159 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:14472:172 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 14472 | #[doc = "Bit 1 - When one, the Timer Counter and the Prescale Counter are synchronously reset on the next positive edge of PCLK. The counters remain reset until TCR[1] is returned to zero."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:16149:75 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 16149 | #[doc = "Bit 2 - Stop on MR0: the TC and PC will be stopped and TCR[0] will be set to 0 if MR0 matches the TC."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:16176:75 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 16176 | #[doc = "Bit 5 - Stop on MR1: the TC and PC will be stopped and TCR[0] will be set to 0 if MR1 matches the TC."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:16203:75 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 16203 | #[doc = "Bit 8 - Stop on MR2: the TC and PC will be stopped and TCR[0] will be set to 0 if MR2 matches the TC."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:16230:76 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 16230 | #[doc = "Bit 11 - Stop on MR3: the TC and PC will be stopped and TCR[0] will be set to 0 if MR3 matches the TC."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.163 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.163 INFO [stderr] --> src/lib.rs:16262:75 Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] 16262 | #[doc = "Bit 2 - Stop on MR0: the TC and PC will be stopped and TCR[0] will be set to 0 if MR0 matches the TC."] Nov 28 12:19:03.163 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.163 INFO [stderr] | Nov 28 12:19:03.163 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.163 INFO [stderr] Nov 28 12:19:03.167 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.167 INFO [stderr] --> src/lib.rs:16277:75 Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] 16277 | #[doc = "Bit 5 - Stop on MR1: the TC and PC will be stopped and TCR[0] will be set to 0 if MR1 matches the TC."] Nov 28 12:19:03.167 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.167 INFO [stderr] Nov 28 12:19:03.167 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.167 INFO [stderr] --> src/lib.rs:16292:75 Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] 16292 | #[doc = "Bit 8 - Stop on MR2: the TC and PC will be stopped and TCR[0] will be set to 0 if MR2 matches the TC."] Nov 28 12:19:03.167 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.167 INFO [stderr] Nov 28 12:19:03.167 INFO [stderr] error: `[0]` cannot be resolved, ignoring it... Nov 28 12:19:03.167 INFO [stderr] --> src/lib.rs:16307:76 Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] 16307 | #[doc = "Bit 11 - Stop on MR3: the TC and PC will be stopped and TCR[0] will be set to 0 if MR3 matches the TC."] Nov 28 12:19:03.167 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.167 INFO [stderr] | Nov 28 12:19:03.167 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.167 INFO [stderr] Nov 28 12:19:03.171 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.171 INFO [stderr] --> src/lib.rs:16906:114 Nov 28 12:19:03.171 INFO [stderr] | Nov 28 12:19:03.171 INFO [stderr] 16906 | #[doc = "External Match Register (EMR). The EMR controls the match function and the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.171 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.171 INFO [stderr] | Nov 28 12:19:03.171 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.171 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[5:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17622:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17622 | #[doc = "Bit 0 - External Match 0. This bit reflects the state of output CT32Bn_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT32B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.175 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.175 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[7:6]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17632:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17632 | #[doc = "Bit 1 - External Match 1. This bit reflects the state of output CT32Bn_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT32B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.175 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.175 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[9:8]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17642:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17642 | #[doc = "Bit 2 - External Match 2. This bit reflects the state of output CT32Bn_MAT2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. This bit is driven to the CT32B0_MAT2/CT16B1_MAT2 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.175 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.175 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[11:10]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17652:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17652 | #[doc = "Bit 3 - External Match 3. This bit reflects the state of output CT32Bn_MAT3, whether or not this output is connected to its pin. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. This bit is driven to the CT32B0_MAT3/CT16B1_MAT3 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.175 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.175 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[5:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17711:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17711 | #[doc = "Bit 0 - External Match 0. This bit reflects the state of output CT32Bn_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT32B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.175 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.175 INFO [stderr] Nov 28 12:19:03.175 INFO [stderr] error: `[7:6]` cannot be resolved, ignoring it... Nov 28 12:19:03.175 INFO [stderr] --> src/lib.rs:17716:258 Nov 28 12:19:03.175 INFO [stderr] | Nov 28 12:19:03.175 INFO [stderr] 17716 | #[doc = "Bit 1 - External Match 1. This bit reflects the state of output CT32Bn_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT32B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.176 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.176 INFO [stderr] | Nov 28 12:19:03.176 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.176 INFO [stderr] Nov 28 12:19:03.176 INFO [stderr] error: `[9:8]` cannot be resolved, ignoring it... Nov 28 12:19:03.176 INFO [stderr] --> src/lib.rs:17721:258 Nov 28 12:19:03.176 INFO [stderr] | Nov 28 12:19:03.176 INFO [stderr] 17721 | #[doc = "Bit 2 - External Match 2. This bit reflects the state of output CT32Bn_MAT2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. This bit is driven to the CT32B0_MAT2/CT16B1_MAT2 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.176 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.176 INFO [stderr] | Nov 28 12:19:03.176 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.176 INFO [stderr] Nov 28 12:19:03.179 INFO [stderr] error: `[11:10]` cannot be resolved, ignoring it... Nov 28 12:19:03.179 INFO [stderr] --> src/lib.rs:17726:258 Nov 28 12:19:03.179 INFO [stderr] | Nov 28 12:19:03.179 INFO [stderr] 17726 | #[doc = "Bit 3 - External Match 3. This bit reflects the state of output CT32Bn_MAT3, whether or not this output is connected to its pin. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. This bit is driven to the CT32B0_MAT3/CT16B1_MAT3 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH)."] Nov 28 12:19:03.179 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.179 INFO [stderr] | Nov 28 12:19:03.179 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.179 INFO [stderr] Nov 28 12:19:03.179 INFO [stderr] error: `[3:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.179 INFO [stderr] --> src/lib.rs:18050:106 Nov 28 12:19:03.179 INFO [stderr] | Nov 28 12:19:03.179 INFO [stderr] 18050 | #[doc = "PWM Control Register (PWMCON). The PWMCON enables PWM mode for the external match pins CT32B0_MAT[3:0]."] Nov 28 12:19:03.179 INFO [stderr] | ^^^ cannot be resolved, ignoring Nov 28 12:19:03.179 INFO [stderr] | Nov 28 12:19:03.179 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.179 INFO [stderr] Nov 28 12:19:03.211 INFO [stderr] error: `[31:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.211 INFO [stderr] --> src/lib.rs:25200:27 Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] 25200 | #[doc = "0x2c - Word 0 [31:0]"] Nov 28 12:19:03.211 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.211 INFO [stderr] Nov 28 12:19:03.211 INFO [stderr] error: `[63:32]` cannot be resolved, ignoring it... Nov 28 12:19:03.211 INFO [stderr] --> src/lib.rs:25202:27 Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] 25202 | #[doc = "0x30 - Word 1 [63:32]"] Nov 28 12:19:03.211 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.211 INFO [stderr] Nov 28 12:19:03.211 INFO [stderr] error: `[95:64]` cannot be resolved, ignoring it... Nov 28 12:19:03.211 INFO [stderr] --> src/lib.rs:25204:27 Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] 25204 | #[doc = "0x34 - Word 2 [95:64]"] Nov 28 12:19:03.211 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.211 INFO [stderr] Nov 28 12:19:03.211 INFO [stderr] error: `[127:96]` cannot be resolved, ignoring it... Nov 28 12:19:03.211 INFO [stderr] --> src/lib.rs:25206:27 Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] 25206 | #[doc = "0x38 - Word 3 [127:96]"] Nov 28 12:19:03.211 INFO [stderr] | ^^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.211 INFO [stderr] | Nov 28 12:19:03.211 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.211 INFO [stderr] Nov 28 12:19:03.211 INFO [stderr] error: `[31:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25765:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25765 | #[doc = "Word 0 [31:0]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[63:32]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25813:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25813 | #[doc = "Word 1 [63:32]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[95:64]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25861:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25861 | #[doc = "Word 2 [95:64]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[127:96]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25909:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25909 | #[doc = "Word 3 [127:96]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[20:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25504:101 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25504 | #[doc = "Bits 0:16 - Signature generation start address (corresponds to AHB byte address bits[20:4])."] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[20:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25527:101 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25527 | #[doc = "Bits 0:16 - Signature generation start address (corresponds to AHB byte address bits[20:4])."] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[20:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25721:94 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25721 | #[doc = "Bits 0:16 - BIST stop address divided by 16 (corresponds to AHB byte address [20:4])."] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[20:4]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25753:94 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25753 | #[doc = "Bits 0:16 - BIST stop address divided by 16 (corresponds to AHB byte address [20:4])."] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[31:0]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25769:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25769 | #[doc = "Word 0 [31:0]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[63:32]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25817:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25817 | #[doc = "Word 1 [63:32]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[95:64]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25865:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25865 | #[doc = "Word 2 [95:64]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.212 INFO [stderr] Nov 28 12:19:03.212 INFO [stderr] error: `[127:96]` cannot be resolved, ignoring it... Nov 28 12:19:03.212 INFO [stderr] --> src/lib.rs:25913:16 Nov 28 12:19:03.212 INFO [stderr] | Nov 28 12:19:03.212 INFO [stderr] 25913 | #[doc = "Word 3 [127:96]"] Nov 28 12:19:03.212 INFO [stderr] | ^^^^^^ cannot be resolved, ignoring Nov 28 12:19:03.213 INFO [stderr] | Nov 28 12:19:03.213 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.213 INFO [stderr] Nov 28 12:19:03.282 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.282 INFO [stderr] --> src/lib.rs:73824:53 Nov 28 12:19:03.282 INFO [stderr] | Nov 28 12:19:03.282 INFO [stderr] 73824 | #[doc = "Bit 5 - System oscillator power-down[1]"] Nov 28 12:19:03.282 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.283 INFO [stderr] | Nov 28 12:19:03.283 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.283 INFO [stderr] Nov 28 12:19:03.283 INFO [stderr] error: `[1]` cannot be resolved, ignoring it... Nov 28 12:19:03.283 INFO [stderr] --> src/lib.rs:73927:53 Nov 28 12:19:03.283 INFO [stderr] | Nov 28 12:19:03.283 INFO [stderr] 73927 | #[doc = "Bit 5 - System oscillator power-down[1]"] Nov 28 12:19:03.283 INFO [stderr] | ^ cannot be resolved, ignoring Nov 28 12:19:03.283 INFO [stderr] | Nov 28 12:19:03.283 INFO [stderr] = help: to escape `[` and `]` characters, just add '\' before them like `\[` or `\]` Nov 28 12:19:03.283 INFO [stderr] Nov 28 12:19:03.561 INFO [stderr] error: Could not document `lpc13xx`. Nov 28 12:19:03.561 INFO [stderr] Nov 28 12:19:03.561 INFO [stderr] Caused by: Nov 28 12:19:03.561 INFO [stderr] process didn't exit successfully: `rustdoc --crate-name lpc13xx src/lib.rs --color never -o /target/doc --document-private-items -L dependency=/target/debug/deps --extern bare_metal=/target/debug/deps/libbare_metal-947dd65d277d4169.rmeta --extern cortex_m=/target/debug/deps/libcortex_m-b69e133569a2dff7.rmeta --extern vcell=/target/debug/deps/libvcell-7ca488482c163a63.rmeta --cap-lints=forbid` (exit code: 1) Nov 28 12:19:03.564 INFO [stderr] su: No module specific data is present Nov 28 12:19:03.890 INFO running `"docker" "inspect" "8a06c7e8b0f6972645763826c41978a7c8da2fff89845bd476e7f6d63961a49a"` Nov 28 12:19:04.040 INFO running `"docker" "rm" "-f" "8a06c7e8b0f6972645763826c41978a7c8da2fff89845bd476e7f6d63961a49a"` Nov 28 12:19:04.186 INFO [stdout] 8a06c7e8b0f6972645763826c41978a7c8da2fff89845bd476e7f6d63961a49a