[INFO] fetching crate prinThor 0.0.3... [INFO] checking prinThor-0.0.3 against master#ab869e094a907cc5d19b4080f22eccaf347f1f95 for pr-129604 [INFO] extracting crate prinThor 0.0.3 into /workspace/builds/worker-0-tc1/source [INFO] validating manifest of crates.io crate prinThor 0.0.3 on toolchain ab869e094a907cc5d19b4080f22eccaf347f1f95 [INFO] running `Command { std: CARGO_HOME="/workspace/cargo-home" RUSTUP_HOME="/workspace/rustup-home" "/workspace/cargo-home/bin/cargo" "+ab869e094a907cc5d19b4080f22eccaf347f1f95" "metadata" "--manifest-path" "Cargo.toml" "--no-deps", kill_on_drop: false }` [INFO] removed /workspace/builds/worker-0-tc1/source/.cargo/config.toml [INFO] started tweaking crates.io crate prinThor 0.0.3 [INFO] finished tweaking crates.io crate prinThor 0.0.3 [INFO] tweaked toml for crates.io crate prinThor 0.0.3 written to /workspace/builds/worker-0-tc1/source/Cargo.toml [INFO] crate crates.io crate prinThor 0.0.3 already has a lockfile, it will not be regenerated [INFO] running `Command { std: CARGO_HOME="/workspace/cargo-home" RUSTUP_HOME="/workspace/rustup-home" "/workspace/cargo-home/bin/cargo" "+ab869e094a907cc5d19b4080f22eccaf347f1f95" "fetch" "--manifest-path" "Cargo.toml", kill_on_drop: false }` [INFO] [stderr] Updating crates.io index [INFO] [stderr] Downloading crates ... [INFO] [stderr] Downloaded tmc2209 v0.2.2 [INFO] [stderr] Downloaded static_cell v2.0.0 [INFO] [stderr] Downloaded defmt v0.3.5 [INFO] [stderr] Downloaded value-bag v1.6.0 [INFO] [stderr] Downloaded ili9341 v0.5.0 [INFO] [stderr] Downloaded lvgl-codegen v0.5.2 [INFO] [stderr] Downloaded defmt-rtt v0.4.0 [INFO] [stderr] Downloaded const_env_impl v0.1.2 [INFO] [stderr] Downloaded cstr_core v0.2.6 [INFO] [stderr] Downloaded embedded-graphics-core v0.3.3 [INFO] [stderr] Downloaded embassy-sync v0.3.0 [INFO] [stderr] Downloaded embassy-usb v0.1.0 [INFO] [stderr] Downloaded gnuplot v0.0.39 [INFO] [stderr] Downloaded embedded-graphics v0.6.2 [INFO] [stderr] Downloaded async-gcode v0.3.0 [INFO] [stderr] Downloaded bxcan v0.7.0 [INFO] [stderr] Downloaded stm32-fmc v0.3.0 [INFO] [stderr] Downloaded printhor-hwi_native v0.0.3 [INFO] [stderr] Downloaded alloc-cortex-m v0.4.4 [INFO] [stderr] Downloaded bindgen v0.54.0 [INFO] [stderr] Downloaded micromath v1.1.1 [INFO] [stderr] Downloaded embassy-stm32 v0.1.0 [INFO] [stderr] Downloaded embedded-sdmmc v0.5.0 [INFO] [stderr] Downloaded embassy-executor v0.5.0 [INFO] [stderr] Downloaded sdio-host v0.5.0 [INFO] [stderr] Downloaded usb-device v0.2.9 [INFO] [stderr] Downloaded embassy-sync v0.5.0 [INFO] [stderr] Downloaded defmt-parser v0.3.3 [INFO] [stderr] Downloaded defmt-macros v0.3.6 [INFO] [stderr] Downloaded printhor-hwi_mks_robin_nano v0.0.3 [INFO] [stderr] Downloaded thread-priority v0.15.1 [INFO] [stderr] Downloaded printhor-hwi_nucleo_64_arduino_cnc_hat v0.0.3 [INFO] [stderr] Downloaded linked_list_allocator v0.10.5 [INFO] [stderr] Downloaded embassy-embedded-hal v0.1.0 [INFO] [stderr] Downloaded ssmarshal v1.0.0 [INFO] [stderr] Downloaded usbd-hid v0.6.1 [INFO] [stderr] Downloaded const_env v0.1.2 [INFO] [stderr] Downloaded display-interface-parallel-gpio v0.6.0 [INFO] [stderr] Downloaded display-interface v0.4.1 [INFO] [stderr] Downloaded lvgl v0.5.2 [INFO] [stderr] Downloaded pid v4.0.0 [INFO] [stderr] Downloaded embassy-hal-internal v0.1.0 [INFO] [stderr] Downloaded usbd-hid-macros v0.6.0 [INFO] [stderr] Downloaded panic-probe v0.3.1 [INFO] [stderr] Downloaded usbd-hid-descriptors v0.1.2 [INFO] [stderr] Downloaded printhor-hwa-common v0.0.3 [INFO] [stderr] Downloaded embassy-executor-macros v0.4.0 [INFO] [stderr] Downloaded embassy-net-driver-channel v0.2.0 [INFO] [stderr] Downloaded embassy-time v0.3.0 [INFO] [stderr] Downloaded printhor-hwi_skr_mini_e3 v0.0.3 [INFO] [stderr] Downloaded rust_decimal_macros v1.33.1 [INFO] [stderr] Downloaded embedded-graphics v0.7.1 [INFO] [stderr] Downloaded lvgl-sys v0.5.2 [INFO] [stderr] Downloaded stm32-metapac v15.0.0 [INFO] running `Command { std: "docker" "create" "-v" "/var/lib/crater-agent-workspace/builds/worker-0-tc1/target:/opt/rustwide/target:rw,Z" "-v" "/var/lib/crater-agent-workspace/builds/worker-0-tc1/source:/opt/rustwide/workdir:ro,Z" "-v" "/var/lib/crater-agent-workspace/cargo-home:/opt/rustwide/cargo-home:ro,Z" "-v" "/var/lib/crater-agent-workspace/rustup-home:/opt/rustwide/rustup-home:ro,Z" "-e" "SOURCE_DIR=/opt/rustwide/workdir" "-e" "CARGO_TARGET_DIR=/opt/rustwide/target" "-e" "CARGO_HOME=/opt/rustwide/cargo-home" "-e" "RUSTUP_HOME=/opt/rustwide/rustup-home" "-w" "/opt/rustwide/workdir" "-m" "1610612736" "--user" "0:0" "--network" "none" "ghcr.io/rust-lang/crates-build-env/linux@sha256:923055f121b5182466d55868a8b05e67af8ba4a3a3f6bad814e953ca3cd3ac2a" "/opt/rustwide/cargo-home/bin/cargo" "+ab869e094a907cc5d19b4080f22eccaf347f1f95" "metadata" "--no-deps" "--format-version=1", kill_on_drop: false }` [INFO] [stdout] d5d9d8c66fc14abe5180179060f9f43f97e364ccfe6ad624cc60911e30d70cf8 [INFO] running `Command { std: "docker" "start" "-a" "d5d9d8c66fc14abe5180179060f9f43f97e364ccfe6ad624cc60911e30d70cf8", kill_on_drop: false }` [INFO] running `Command { std: "docker" "inspect" "d5d9d8c66fc14abe5180179060f9f43f97e364ccfe6ad624cc60911e30d70cf8", kill_on_drop: false }` [INFO] running `Command { std: "docker" "rm" "-f" "d5d9d8c66fc14abe5180179060f9f43f97e364ccfe6ad624cc60911e30d70cf8", kill_on_drop: false }` [INFO] [stdout] d5d9d8c66fc14abe5180179060f9f43f97e364ccfe6ad624cc60911e30d70cf8 [INFO] running `Command { std: "docker" "create" "-v" "/var/lib/crater-agent-workspace/builds/worker-0-tc1/target:/opt/rustwide/target:rw,Z" "-v" "/var/lib/crater-agent-workspace/builds/worker-0-tc1/source:/opt/rustwide/workdir:ro,Z" "-v" "/var/lib/crater-agent-workspace/cargo-home:/opt/rustwide/cargo-home:ro,Z" "-v" "/var/lib/crater-agent-workspace/rustup-home:/opt/rustwide/rustup-home:ro,Z" "-e" "SOURCE_DIR=/opt/rustwide/workdir" "-e" "CARGO_TARGET_DIR=/opt/rustwide/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "RUSTDOCFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/rustwide/cargo-home" "-e" "RUSTUP_HOME=/opt/rustwide/rustup-home" "-w" "/opt/rustwide/workdir" "-m" "1610612736" "--user" "0:0" "--network" "none" "ghcr.io/rust-lang/crates-build-env/linux@sha256:923055f121b5182466d55868a8b05e67af8ba4a3a3f6bad814e953ca3cd3ac2a" "/opt/rustwide/cargo-home/bin/cargo" "+ab869e094a907cc5d19b4080f22eccaf347f1f95" "check" "--frozen" "--all" "--all-targets" "--message-format=json", kill_on_drop: false }` [INFO] [stdout] 8c3a8d9d10184e672cb3a8f12c54a3b57bb2ca5e2a91254c8db852117f7727f7 [INFO] running `Command { std: "docker" "start" "-a" "8c3a8d9d10184e672cb3a8f12c54a3b57bb2ca5e2a91254c8db852117f7727f7", kill_on_drop: false }` [INFO] [stderr] Compiling autocfg v1.1.0 [INFO] [stderr] Checking pin-project-lite v0.2.13 [INFO] [stderr] Checking futures-core v0.3.30 [INFO] [stderr] Compiling proc-macro2 v1.0.76 [INFO] [stderr] Compiling unicode-ident v1.0.12 [INFO] [stderr] Compiling crossbeam-utils v0.8.19 [INFO] [stderr] Checking parking v2.2.0 [INFO] [stderr] Checking cfg-if v1.0.0 [INFO] [stderr] Checking futures-io v0.3.30 [INFO] [stderr] Checking bytemuck v1.14.0 [INFO] [stderr] Compiling libc v0.2.152 [INFO] [stderr] Compiling rustix v0.38.28 [INFO] [stderr] Checking pin-utils v0.1.0 [INFO] [stderr] Checking byteorder v1.4.3 [INFO] [stderr] Checking futures-sink v0.3.30 [INFO] [stderr] Checking value-bag v1.6.0 [INFO] [stderr] Checking bitflags v2.4.1 [INFO] [stderr] Checking critical-section v1.1.2 [INFO] [stderr] Checking log v0.4.20 [INFO] [stderr] Compiling slab v0.4.9 [INFO] [stderr] Checking futures-task v0.3.30 [INFO] [stderr] Checking fastrand v2.0.1 [INFO] [stderr] Checking memchr v2.7.1 [INFO] [stderr] Checking linux-raw-sys v0.4.12 [INFO] [stderr] Checking futures-util v0.3.30 [INFO] [stderr] Compiling num-traits v0.2.17 [INFO] [stderr] Checking tracing-core v0.1.32 [INFO] [stderr] Checking concurrent-queue v2.4.0 [INFO] [stderr] Checking nb v1.1.0 [INFO] [stderr] Compiling litrs v0.4.1 [INFO] [stderr] Compiling quote v1.0.35 [INFO] [stderr] Checking event-listener v4.0.3 [INFO] [stderr] Compiling heapless v0.8.0 [INFO] [stderr] Compiling syn v2.0.48 [INFO] [stderr] Checking tracing v0.1.40 [INFO] [stderr] Checking event-listener-strategy v0.4.0 [INFO] [stderr] Checking nb v0.1.3 [INFO] [stderr] Checking async-lock v3.3.0 [INFO] [stderr] Checking futures-lite v2.2.0 [INFO] [stderr] Compiling document-features v0.2.8 [INFO] [stderr] Checking hash32 v0.3.1 [INFO] [stderr] Compiling fnv v1.0.7 [INFO] [stderr] Compiling embassy-time-queue-driver v0.1.0 [INFO] [stderr] Checking void v1.0.2 [INFO] [stderr] Compiling embassy-time-driver v0.1.0 [INFO] [stderr] Checking stable_deref_trait v1.2.0 [INFO] [stderr] Compiling rustversion v1.0.14 [INFO] [stderr] Compiling strsim v0.10.0 [INFO] [stderr] Compiling embedded-hal-async v1.0.0 [INFO] [stderr] Compiling ident_case v1.0.1 [INFO] [stderr] Compiling io-lifetimes v1.0.11 [INFO] [stderr] Compiling embedded-io-async v0.6.1 [INFO] [stderr] Checking embedded-hal v0.2.7 [INFO] [stderr] Compiling polling v2.8.0 [INFO] [stderr] Checking atomic-waker v1.1.2 [INFO] [stderr] Compiling embassy-sync v0.5.0 [INFO] [stderr] Checking bitflags v1.3.2 [INFO] [stderr] Compiling rustix v0.37.27 [INFO] [stderr] Checking event-listener v2.5.3 [INFO] [stderr] Checking embedded-io v0.6.1 [INFO] [stderr] Checking embedded-hal v1.0.0 [INFO] [stderr] Compiling portable-atomic v1.6.0 [INFO] [stderr] Checking async-task v4.7.0 [INFO] [stderr] Checking piper v0.2.1 [INFO] [stderr] Checking async-channel v2.1.1 [INFO] [stderr] Checking aho-corasick v1.1.2 [INFO] [stderr] Compiling async-io v1.13.0 [INFO] [stderr] Checking fastrand v1.9.0 [INFO] [stderr] Checking linux-raw-sys v0.3.8 [INFO] [stderr] Checking waker-fn v1.1.1 [INFO] [stderr] Checking regex-syntax v0.8.2 [INFO] [stderr] Compiling syn v1.0.109 [INFO] [stderr] Checking futures-lite v1.13.0 [INFO] [stderr] Checking blocking v1.5.1 [INFO] [stderr] Checking embassy-time v0.3.0 [INFO] [stderr] Checking async-executor v1.8.0 [INFO] [stderr] Checking async-lock v2.8.0 [INFO] [stderr] Checking socket2 v0.4.10 [INFO] [stderr] Checking futures-channel v0.3.30 [INFO] [stderr] Checking once_cell v1.19.0 [INFO] [stderr] Compiling serde v1.0.195 [INFO] [stderr] Checking embedded-storage v0.3.1 [INFO] [stderr] Checking regex-automata v0.4.3 [INFO] [stderr] Compiling rust_decimal v1.33.1 [INFO] [stderr] Compiling embassy-executor v0.5.0 [INFO] [stderr] Checking embedded-storage-async v0.4.1 [INFO] [stderr] Checking futures v0.3.30 [INFO] [stderr] Checking static_cell v2.0.0 [INFO] [stderr] Checking async-channel v1.9.0 [INFO] [stderr] Checking kv-log-macro v1.0.7 [INFO] [stderr] Checking humantime v2.1.0 [INFO] [stderr] Compiling darling_core v0.20.3 [INFO] [stderr] Checking termcolor v1.4.1 [INFO] [stderr] Compiling heck v0.4.1 [INFO] [stderr] Checking either v1.9.0 [INFO] [stderr] Checking embassy-futures v0.1.1 [INFO] [stderr] Compiling arrayvec v0.7.4 [INFO] [stderr] Checking embassy-embedded-hal v0.1.0 [INFO] [stderr] Checking async-gcode v0.3.0 [INFO] [stderr] Checking polling v3.3.1 [INFO] [stderr] Checking is-terminal v0.4.10 [INFO] [stderr] Checking regex v1.10.2 [INFO] [stderr] Checking printhor-hwa-common v0.0.3 [INFO] [stderr] Checking async-io v2.2.2 [INFO] [stderr] Checking thread-priority v0.15.1 [INFO] [stderr] Checking env_logger v0.10.1 [INFO] [stderr] Checking embedded-sdmmc v0.5.0 [INFO] [stderr] Compiling prinThor v0.0.3 (/opt/rustwide/workdir) [INFO] [stderr] Compiling rust_decimal_macros v1.33.1 [INFO] [stderr] Checking pid v4.0.0 [INFO] [stderr] Checking gnuplot v0.0.39 [INFO] [stderr] Checking async-global-executor v2.4.1 [INFO] [stderr] Checking micromath v2.1.0 [INFO] [stderr] Checking async-std v1.12.0 [INFO] [stderr] Compiling strum_macros v0.25.3 [INFO] [stderr] Compiling darling_macro v0.20.3 [INFO] [stderr] Compiling darling v0.20.3 [INFO] [stderr] Compiling embassy-executor-macros v0.4.0 [INFO] [stderr] Compiling const_env_impl v0.1.2 [INFO] [stderr] Checking printhor-hwi_native v0.0.3 [INFO] [stderr] Compiling const_env v0.1.2 [INFO] [stderr] Checking strum v0.25.0 [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan` [INFO] [stdout] --> src/bin/printhor/hwi/mod.rs:29:7 [INFO] [stdout] | [INFO] [stdout] 29 | #[cfg(feature = "with-fan")] [INFO] [stdout] | ^^^^^^^^^^---------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] = note: `#[warn(unexpected_cfgs)]` on by default [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan` [INFO] [stdout] --> src/bin/printhor/hwi/mod.rs:29:7 [INFO] [stdout] | [INFO] [stdout] 29 | #[cfg(feature = "with-fan")] [INFO] [stdout] | ^^^^^^^^^^---------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] = note: `#[warn(unexpected_cfgs)]` on by default [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/mod.rs:123:11 [INFO] [stdout] | [INFO] [stdout] 123 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/mod.rs:126:11 [INFO] [stdout] | [INFO] [stdout] 126 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:55:11 [INFO] [stdout] | [INFO] [stdout] 55 | #[cfg(feature = "with-fan1")] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/mod.rs:123:11 [INFO] [stdout] | [INFO] [stdout] 123 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:72:19 [INFO] [stdout] | [INFO] [stdout] 72 | #[cfg(feature = "with-fan")] [INFO] [stdout] | ^^^^^^^^^^---------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:80:19 [INFO] [stdout] | [INFO] [stdout] 80 | #[cfg(feature = "with-fan1")] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:121:19 [INFO] [stdout] | [INFO] [stdout] 121 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:319:46 [INFO] [stdout] | [INFO] [stdout] 319 | #[cfg(any(feature = "with-fan0", feature = "with-fan1"))] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:326:46 [INFO] [stdout] | [INFO] [stdout] 326 | #[cfg(any(feature = "with-fan0", feature = "with-fan1"))] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/mod.rs:126:11 [INFO] [stdout] | [INFO] [stdout] 126 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:76:39 [INFO] [stdout] | [INFO] [stdout] 76 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:55:11 [INFO] [stdout] | [INFO] [stdout] 55 | #[cfg(feature = "with-fan1")] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:72:19 [INFO] [stdout] | [INFO] [stdout] 72 | #[cfg(feature = "with-fan")] [INFO] [stdout] | ^^^^^^^^^^---------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:104:59 [INFO] [stdout] | [INFO] [stdout] 104 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:303:59 [INFO] [stdout] | [INFO] [stdout] 303 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:80:19 [INFO] [stdout] | [INFO] [stdout] 80 | #[cfg(feature = "with-fan1")] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/task_control.rs:8:11 [INFO] [stdout] | [INFO] [stdout] 8 | #[cfg(any(feature = "grbl-compat", feature = "with-printjob", feature = "with-sdcard"))] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:121:19 [INFO] [stdout] | [INFO] [stdout] 121 | #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:319:46 [INFO] [stdout] | [INFO] [stdout] 319 | #[cfg(any(feature = "with-fan0", feature = "with-fan1"))] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/task_control.rs:83:35 [INFO] [stdout] | [INFO] [stdout] 83 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `with-fan1` [INFO] [stdout] --> src/bin/printhor/control/processor.rs:326:46 [INFO] [stdout] | [INFO] [stdout] 326 | #[cfg(any(feature = "with-fan0", feature = "with-fan1"))] [INFO] [stdout] | ^^^^^^^^^^----------- [INFO] [stdout] | | [INFO] [stdout] | help: there is a expected value with a similar name: `"with-fan0"` [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `with-fan1` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:76:39 [INFO] [stdout] | [INFO] [stdout] 76 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:104:59 [INFO] [stdout] | [INFO] [stdout] 104 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/parser.rs:303:59 [INFO] [stdout] | [INFO] [stdout] 303 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/task_control.rs:8:11 [INFO] [stdout] | [INFO] [stdout] 8 | #[cfg(any(feature = "grbl-compat", feature = "with-printjob", feature = "with-sdcard"))] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: unexpected `cfg` condition value: `grbl-compat` [INFO] [stdout] --> src/bin/printhor/control/task_control.rs:83:35 [INFO] [stdout] | [INFO] [stdout] 83 | ... #[cfg(feature = "grbl-compat")] [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: expected values for `feature` are: `_arch`, `alloc-cortex-m`, `arch-std`, `cortex-m`, `cortex-m-rt`, `cstr_core`, `default`, `defmt`, `defmt-rtt`, `display-interface-parallel-gpio`, `embassy-embedded-hal`, `embassy-executor`, `embassy-stm32`, `embedded-graphics`, `embedded-graphics-core`, `embedded-hal`, `embedded-sdmmc`, `fixed-point-128-impl`, `float-point-f32-impl`, `float-point-f64-impl`, `gnuplot`, `has-extruder`, `ili9341`, `ili9341_parallel`, `ili9341_spi`, `integration-test`, `integration-test-benchy`, `integration-test-dwell`, `integration-test-homing`, `integration-test-laser-engrave`, `integration-test-m100`, `integration-test-move-boundaries`, `integration-test-move-oblique`, `integration-test-move-ortho`, and `integration-test-power-on` and 39 more [INFO] [stdout] = help: consider adding `grbl-compat` as a feature in `Cargo.toml` [INFO] [stdout] = note: see for more information about checking conditional configuration [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: methods `probe_self_test`, `probe_alarm_release`, and `probe_test_mode` are never used [INFO] [stdout] --> src/bin/printhor/hwa/controllers/servo_controller.rs:11:14 [INFO] [stdout] | [INFO] [stdout] 8 | pub trait ProbeTrait { [INFO] [stdout] | ---------- methods in this trait [INFO] [stdout] ... [INFO] [stdout] 11 | async fn probe_self_test(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^ [INFO] [stdout] 12 | async fn probe_alarm_release(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] 13 | async fn probe_test_mode(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: `#[warn(dead_code)]` on by default [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: field `layer_fan_controller` is never read [INFO] [stdout] --> src/bin/printhor/hwa/drivers/motion_driver.rs:36:9 [INFO] [stdout] | [INFO] [stdout] 25 | pub struct MotionDriver { [INFO] [stdout] | ------------ field in this struct [INFO] [stdout] ... [INFO] [stdout] 36 | pub layer_fan_controller: ControllerRef, [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: field `layer_fan` is never read [INFO] [stdout] --> src/bin/printhor/control/processor.rs:32:9 [INFO] [stdout] | [INFO] [stdout] 14 | pub struct GCodeProcessorParams { [INFO] [stdout] | -------------------- field in this struct [INFO] [stdout] ... [INFO] [stdout] 32 | pub layer_fan: hwa::controllers::LayerPwmControllerRef, [INFO] [stdout] | ^^^^^^^^^ [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: fields `probe` and `laser` are never read [INFO] [stdout] --> src/bin/printhor/control/processor.rs:48:9 [INFO] [stdout] | [INFO] [stdout] 38 | pub struct GCodeProcessor { [INFO] [stdout] | -------------- fields in this struct [INFO] [stdout] ... [INFO] [stdout] 48 | pub probe: hwa::controllers::ServoControllerRef, [INFO] [stdout] | ^^^^^ [INFO] [stdout] ... [INFO] [stdout] 58 | pub laser: hwa::controllers::LaserPwmControllerRef, [INFO] [stdout] | ^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: `GCodeProcessor` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: 18 warnings emitted [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: methods `probe_self_test`, `probe_alarm_release`, and `probe_test_mode` are never used [INFO] [stdout] --> src/bin/printhor/hwa/controllers/servo_controller.rs:11:14 [INFO] [stdout] | [INFO] [stdout] 8 | pub trait ProbeTrait { [INFO] [stdout] | ---------- methods in this trait [INFO] [stdout] ... [INFO] [stdout] 11 | async fn probe_self_test(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^ [INFO] [stdout] 12 | async fn probe_alarm_release(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] 13 | async fn probe_test_mode(&mut self, sleep_us: u64); [INFO] [stdout] | ^^^^^^^^^^^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: `#[warn(dead_code)]` on by default [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: field `layer_fan_controller` is never read [INFO] [stdout] --> src/bin/printhor/hwa/drivers/motion_driver.rs:36:9 [INFO] [stdout] | [INFO] [stdout] 25 | pub struct MotionDriver { [INFO] [stdout] | ------------ field in this struct [INFO] [stdout] ... [INFO] [stdout] 36 | pub layer_fan_controller: ControllerRef, [INFO] [stdout] | ^^^^^^^^^^^^^^^^^^^^ [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: field `layer_fan` is never read [INFO] [stdout] --> src/bin/printhor/control/processor.rs:32:9 [INFO] [stdout] | [INFO] [stdout] 14 | pub struct GCodeProcessorParams { [INFO] [stdout] | -------------------- field in this struct [INFO] [stdout] ... [INFO] [stdout] 32 | pub layer_fan: hwa::controllers::LayerPwmControllerRef, [INFO] [stdout] | ^^^^^^^^^ [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: fields `probe` and `laser` are never read [INFO] [stdout] --> src/bin/printhor/control/processor.rs:48:9 [INFO] [stdout] | [INFO] [stdout] 38 | pub struct GCodeProcessor { [INFO] [stdout] | -------------- fields in this struct [INFO] [stdout] ... [INFO] [stdout] 48 | pub probe: hwa::controllers::ServoControllerRef, [INFO] [stdout] | ^^^^^ [INFO] [stdout] ... [INFO] [stdout] 58 | pub laser: hwa::controllers::LaserPwmControllerRef, [INFO] [stdout] | ^^^^^ [INFO] [stdout] | [INFO] [stdout] = note: `GCodeProcessor` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis [INFO] [stdout] [INFO] [stdout] [INFO] [stdout] warning: 18 warnings emitted [INFO] [stdout] [INFO] [stdout] [INFO] [stderr] Finished `dev` profile [unoptimized + debuginfo] target(s) in 59.02s [INFO] running `Command { std: "docker" "inspect" "8c3a8d9d10184e672cb3a8f12c54a3b57bb2ca5e2a91254c8db852117f7727f7", kill_on_drop: false }` [INFO] running `Command { std: "docker" "rm" "-f" "8c3a8d9d10184e672cb3a8f12c54a3b57bb2ca5e2a91254c8db852117f7727f7", kill_on_drop: false }` [INFO] [stdout] 8c3a8d9d10184e672cb3a8f12c54a3b57bb2ca5e2a91254c8db852117f7727f7