[INFO] crate xmc1000-hal 0.1.0 is already in cache
[INFO] extracting crate xmc1000-hal 0.1.0 into work/ex/clippy-test-run/sources/stable/reg/xmc1000-hal/0.1.0
[INFO] extracting crate xmc1000-hal 0.1.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/xmc1000-hal/0.1.0
[INFO] validating manifest of xmc1000-hal-0.1.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of xmc1000-hal-0.1.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing xmc1000-hal-0.1.0
[INFO] finished frobbing xmc1000-hal-0.1.0
[INFO] frobbed toml for xmc1000-hal-0.1.0 written to work/ex/clippy-test-run/sources/stable/reg/xmc1000-hal/0.1.0/Cargo.toml
[INFO] started frobbing xmc1000-hal-0.1.0
[INFO] finished frobbing xmc1000-hal-0.1.0
[INFO] frobbed toml for xmc1000-hal-0.1.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/xmc1000-hal/0.1.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting xmc1000-hal-0.1.0 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-1/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/xmc1000-hal/0.1.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] c20ffa53aee9da4cfe19b7d20e1cde749330740d83166c66e3819b176a399607
[INFO] running `"docker" "start" "-a" "c20ffa53aee9da4cfe19b7d20e1cde749330740d83166c66e3819b176a399607"`
[INFO] [stderr]    Compiling xmc1000 v0.1.0
[INFO] [stderr]     Checking cast v0.2.2
[INFO] [stderr]     Checking embedded-hal v0.2.2
[INFO] [stderr]     Checking xmc1000-hal v0.1.0 (/opt/crater/workdir)
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: lint level defined here
[INFO] [stderr]    --> src/lib.rs:2:9
[INFO] [stderr]     |
[INFO] [stderr] 2   | #![deny(warnings)]
[INFO] [stderr]     |         ^^^^^^^^
[INFO] [stderr]     = note: #[deny(clippy::wrong_self_convention)] implied by #[deny(warnings)]
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: lint level defined here
[INFO] [stderr]    --> src/lib.rs:2:9
[INFO] [stderr]     |
[INFO] [stderr] 2   | #![deny(warnings)]
[INFO] [stderr]     |         ^^^^^^^^
[INFO] [stderr]     = note: #[deny(clippy::cast_lossless)] implied by #[deny(warnings)]
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to 28 previous errors
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `xmc1000-hal`.
[INFO] [stderr] warning: build failed, waiting for other jobs to finish...
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: lint level defined here
[INFO] [stderr]    --> src/lib.rs:2:9
[INFO] [stderr]     |
[INFO] [stderr] 2   | #![deny(warnings)]
[INFO] [stderr]     |         ^^^^^^^^
[INFO] [stderr]     = note: #[deny(clippy::wrong_self_convention)] implied by #[deny(warnings)]
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: lint level defined here
[INFO] [stderr]    --> src/lib.rs:2:9
[INFO] [stderr]     |
[INFO] [stderr] 2   | #![deny(warnings)]
[INFO] [stderr]     |         ^^^^^^^^
[INFO] [stderr]     = note: #[deny(clippy::cast_lossless)] implied by #[deny(warnings)]
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 285 | / gpio!(PORT0, port0, P0x, [
[INFO] [stderr] 286 | |     IOCR0: iocr0, [
[INFO] [stderr] 287 | |         P0_00: (p0_00,  0, Input<Floating>),
[INFO] [stderr] 288 | |         P0_01: (p0_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 309 | |     ],
[INFO] [stderr] 310 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 312 | / gpio!(PORT1, port1, P1x, [
[INFO] [stderr] 313 | |     IOCR0: iocr0, [
[INFO] [stderr] 314 | |         P1_00: (p1_00, 0, Input<Floating>),
[INFO] [stderr] 315 | |         P1_01: (p1_01, 1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 323 | |     ],
[INFO] [stderr] 324 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:146:35
[INFO] [stderr]     |
[INFO] [stderr] 146 |                   pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                     ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:152:36
[INFO] [stderr]     |
[INFO] [stderr] 152 |                   pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                      ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:176:40
[INFO] [stderr]     |
[INFO] [stderr] 176 |                               let mode = PC::OUTPUT_OPEN_DRAIN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_OPEN_DRAIN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:190:40
[INFO] [stderr]     |
[INFO] [stderr] 190 |                               let mode = PC::OUTPUT_PUSH_PULL.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::OUTPUT_PUSH_PULL.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:204:40
[INFO] [stderr]     |
[INFO] [stderr] 204 |                               let mode = PC::INPUT.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:214:40
[INFO] [stderr]     |
[INFO] [stderr] 214 |                               let mode = PC::INPUT_PULL_DOWN.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_DOWN.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: casting u8 to u32 may become silently lossy if types change
[INFO] [stderr]    --> src/gpio.rs:224:40
[INFO] [stderr]     |
[INFO] [stderr] 224 |                               let mode = PC::INPUT_PULL_UP.bits() as u32;
[INFO] [stderr]     |                                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `u32::from(PC::INPUT_PULL_UP.bits())`
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:255:43
[INFO] [stderr]     |
[INFO] [stderr] 255 |                           pub fn is_set_low(&mut self) -> bool {
[INFO] [stderr]     |                                             ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: methods called `is_*` usually take self by reference or no self; consider choosing a less ambiguous name
[INFO] [stderr]    --> src/gpio.rs:261:44
[INFO] [stderr]     |
[INFO] [stderr] 261 |                           pub fn is_set_high(&mut self) -> bool {
[INFO] [stderr]     |                                              ^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 326 | / gpio!(PORT2, port2, P2x, [
[INFO] [stderr] 327 | |     IOCR0: iocr0, [
[INFO] [stderr] 328 | |         P2_00: (p2_00,  0, Input<Floating>),
[INFO] [stderr] 329 | |         P2_01: (p2_01,  1, Input<Floating>),
[INFO] [stderr] ...   |
[INFO] [stderr] 344 | |     ],
[INFO] [stderr] 345 | | ]);
[INFO] [stderr]     | |___- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#wrong_self_convention
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to 28 previous errors
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `xmc1000-hal`.
[INFO] [stderr] 
[INFO] [stderr] To learn more, run the command again with --verbose.
[INFO] running `"docker" "inspect" "c20ffa53aee9da4cfe19b7d20e1cde749330740d83166c66e3819b176a399607"`
[INFO] running `"docker" "rm" "-f" "c20ffa53aee9da4cfe19b7d20e1cde749330740d83166c66e3819b176a399607"`
[INFO] [stdout] c20ffa53aee9da4cfe19b7d20e1cde749330740d83166c66e3819b176a399607