[INFO] crate prettyprint 0.2.0 is already in cache
[INFO] extracting crate prettyprint 0.2.0 into work/ex/clippy-test-run/sources/stable/reg/prettyprint/0.2.0
[INFO] extracting crate prettyprint 0.2.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/prettyprint/0.2.0
[INFO] validating manifest of prettyprint-0.2.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of prettyprint-0.2.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing prettyprint-0.2.0
[INFO] finished frobbing prettyprint-0.2.0
[INFO] frobbed toml for prettyprint-0.2.0 written to work/ex/clippy-test-run/sources/stable/reg/prettyprint/0.2.0/Cargo.toml
[INFO] started frobbing prettyprint-0.2.0
[INFO] finished frobbing prettyprint-0.2.0
[INFO] frobbed toml for prettyprint-0.2.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/prettyprint/0.2.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting prettyprint-0.2.0 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-4/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/prettyprint/0.2.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] a0d3ac73c13fb72b2b14299031240fe109cded7edb70eb06a662221458519140
[INFO] running `"docker" "start" "-a" "a0d3ac73c13fb72b2b14299031240fe109cded7edb70eb06a662221458519140"`
[INFO] [stderr]     Checking shell-words v0.1.0
[INFO] [stderr]    Compiling onig_sys v69.1.0
[INFO] [stderr]    Compiling ansi_colours v1.0.1
[INFO] [stderr]     Checking content_inspector v0.2.4
[INFO] [stderr]     Checking plist v0.3.0
[INFO] [stderr]    Compiling darling_core v0.8.3
[INFO] [stderr]    Compiling darling_macro v0.8.3
[INFO] [stderr]     Checking onig v4.3.1
[INFO] [stderr]     Checking syntect v3.0.2
[INFO] [stderr]    Compiling darling v0.8.3
[INFO] [stderr]    Compiling derive_builder_core v0.4.0
[INFO] [stderr]    Compiling derive_builder v0.7.0
[INFO] [stderr]     Checking prettyprint v0.2.0 (/opt/crater/workdir)
[INFO] [stderr] warning: using `write!()` with a format string that ends in a single newline, consider using `writeln!()` instead
[INFO] [stderr]    --> src/printer.rs:307:17
[INFO] [stderr]     |
[INFO] [stderr] 307 |                 write!(handle, "\n")?;
[INFO] [stderr]     |                 ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::write_with_newline)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#write_with_newline
[INFO] [stderr] 
[INFO] [stderr] warning: using `write!()` with a format string that ends in a single newline, consider using `writeln!()` instead
[INFO] [stderr]    --> src/printer.rs:410:13
[INFO] [stderr]     |
[INFO] [stderr] 410 |             write!(handle, "\n")?;
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#write_with_newline
[INFO] [stderr] 
[INFO] [stderr] warning: using `write!()` with a format string that ends in a single newline, consider using `writeln!()` instead
[INFO] [stderr]    --> src/printer.rs:307:17
[INFO] [stderr]     |
[INFO] [stderr] 307 |                 write!(handle, "\n")?;
[INFO] [stderr]     |                 ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::write_with_newline)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#write_with_newline
[INFO] [stderr] 
[INFO] [stderr] warning: using `write!()` with a format string that ends in a single newline, consider using `writeln!()` instead
[INFO] [stderr]    --> src/printer.rs:410:13
[INFO] [stderr]     |
[INFO] [stderr] 410 |             write!(handle, "\n")?;
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#write_with_newline
[INFO] [stderr] 
[INFO] [stderr] warning: returning the result of a let binding from a block. Consider returning the expression directly.
[INFO] [stderr]    --> src/assets.rs:115:17
[INFO] [stderr]     |
[INFO] [stderr] 115 |                 syntax
[INFO] [stderr]     |                 ^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::let_and_return)] on by default
[INFO] [stderr] note: this expression can be directly returned
[INFO] [stderr]    --> src/assets.rs:114:30
[INFO] [stderr]     |
[INFO] [stderr] 114 |                 let syntax = ext_syntax.or(line_syntax);
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]    --> src/line_range.rs:129:16
[INFO] [stderr]     |
[INFO] [stderr] 129 |           } else {
[INFO] [stderr]     |  ________________^
[INFO] [stderr] 130 | |             if self.ranges.iter().any(|r| r.is_inside(line)) {
[INFO] [stderr] 131 | |                 RangeCheckResult::InRange
[INFO] [stderr] 132 | |             } else {
[INFO] [stderr] ...   |
[INFO] [stderr] 138 | |             }
[INFO] [stderr] 139 | |         }
[INFO] [stderr]     | |_________^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::collapsible_if)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]     |
[INFO] [stderr] 129 |         } else if self.ranges.iter().any(|r| r.is_inside(line)) {
[INFO] [stderr] 130 |     RangeCheckResult::InRange
[INFO] [stderr] 131 | } else {
[INFO] [stderr] 132 |     if line < self.largest_upper_bound {
[INFO] [stderr] 133 |         RangeCheckResult::OutsideRange
[INFO] [stderr] 134 |     } else {
[INFO] [stderr]   ...
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]    --> src/line_range.rs:132:20
[INFO] [stderr]     |
[INFO] [stderr] 132 |               } else {
[INFO] [stderr]     |  ____________________^
[INFO] [stderr] 133 | |                 if line < self.largest_upper_bound {
[INFO] [stderr] 134 | |                     RangeCheckResult::OutsideRange
[INFO] [stderr] 135 | |                 } else {
[INFO] [stderr] 136 | |                     RangeCheckResult::AfterLastRange
[INFO] [stderr] 137 | |                 }
[INFO] [stderr] 138 | |             }
[INFO] [stderr]     | |_____________^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]     |
[INFO] [stderr] 132 |             } else if line < self.largest_upper_bound {
[INFO] [stderr] 133 |     RangeCheckResult::OutsideRange
[INFO] [stderr] 134 | } else {
[INFO] [stderr] 135 |     RangeCheckResult::AfterLastRange
[INFO] [stderr] 136 | }
[INFO] [stderr]     |
[INFO] [stderr] 
[INFO] [stderr] warning: returning the result of a let binding from a block. Consider returning the expression directly.
[INFO] [stderr]    --> src/assets.rs:115:17
[INFO] [stderr]     |
[INFO] [stderr] 115 |                 syntax
[INFO] [stderr]     |                 ^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::let_and_return)] on by default
[INFO] [stderr] note: this expression can be directly returned
[INFO] [stderr]    --> src/assets.rs:114:30
[INFO] [stderr]     |
[INFO] [stderr] 114 |                 let syntax = ext_syntax.or(line_syntax);
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]    --> src/line_range.rs:129:16
[INFO] [stderr]     |
[INFO] [stderr] 129 |           } else {
[INFO] [stderr]     |  ________________^
[INFO] [stderr] 130 | |             if self.ranges.iter().any(|r| r.is_inside(line)) {
[INFO] [stderr] 131 | |                 RangeCheckResult::InRange
[INFO] [stderr] 132 | |             } else {
[INFO] [stderr] ...   |
[INFO] [stderr] 138 | |             }
[INFO] [stderr] 139 | |         }
[INFO] [stderr]     | |_________^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::collapsible_if)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]     |
[INFO] [stderr] 129 |         } else if self.ranges.iter().any(|r| r.is_inside(line)) {
[INFO] [stderr] 130 |     RangeCheckResult::InRange
[INFO] [stderr] 131 | } else {
[INFO] [stderr] 132 |     if line < self.largest_upper_bound {
[INFO] [stderr] 133 |         RangeCheckResult::OutsideRange
[INFO] [stderr] 134 |     } else {
[INFO] [stderr]   ...
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]    --> src/line_range.rs:132:20
[INFO] [stderr]     |
[INFO] [stderr] 132 |               } else {
[INFO] [stderr]     |  ____________________^
[INFO] [stderr] 133 | |                 if line < self.largest_upper_bound {
[INFO] [stderr] 134 | |                     RangeCheckResult::OutsideRange
[INFO] [stderr] 135 | |                 } else {
[INFO] [stderr] 136 | |                     RangeCheckResult::AfterLastRange
[INFO] [stderr] 137 | |                 }
[INFO] [stderr] 138 | |             }
[INFO] [stderr]     | |_____________^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]     |
[INFO] [stderr] 132 |             } else if line < self.largest_upper_bound {
[INFO] [stderr] 133 |     RangeCheckResult::OutsideRange
[INFO] [stderr] 134 | } else {
[INFO] [stderr] 135 |     RangeCheckResult::AfterLastRange
[INFO] [stderr] 136 | }
[INFO] [stderr]     |
[INFO] [stderr] 
[INFO] [stderr] warning: this lifetime isn't used in the function definition
[INFO] [stderr]    --> src/builder.rs:186:19
[INFO] [stderr]     |
[INFO] [stderr] 186 |     fn print_file<'a, P: Printer>(
[INFO] [stderr]     |                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::extra_unused_lifetimes)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes
[INFO] [stderr] 
[INFO] [stderr] warning: this lifetime isn't used in the function definition
[INFO] [stderr]    --> src/builder.rs:201:26
[INFO] [stderr]     |
[INFO] [stderr] 201 |     fn print_file_ranges<'a, P: Printer>(
[INFO] [stderr]     |                          ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]   --> src/output.rs:34:14
[INFO] [stderr]    |
[INFO] [stderr] 34 |             .unwrap_or(String::from("less"));
[INFO] [stderr]    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|| String::from("less"))`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::or_fun_call)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: use of `or` followed by a function call
[INFO] [stderr]   --> src/output.rs:33:14
[INFO] [stderr]    |
[INFO] [stderr] 33 |             .or(pager_from_env.ok())
[INFO] [stderr]    |              ^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `or_else(|| pager_from_env.ok())`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: this function has too many arguments (14/7)
[INFO] [stderr]    --> src/printer.rs:64:5
[INFO] [stderr]     |
[INFO] [stderr] 64  | /     pub fn new(
[INFO] [stderr] 65  | |         assets: &'a HighlightingAssets,
[INFO] [stderr] 66  | |         file: &InputFile,
[INFO] [stderr] 67  | |         reader: &mut InputFileReader,
[INFO] [stderr] ...   |
[INFO] [stderr] 136 | |         }
[INFO] [stderr] 137 | |     }
[INFO] [stderr]     | |_____^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::too_many_arguments)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments
[INFO] [stderr] 
[INFO] [stderr] warning: this lifetime isn't used in the function definition
[INFO] [stderr]    --> src/builder.rs:186:19
[INFO] [stderr]     |
[INFO] [stderr] 186 |     fn print_file<'a, P: Printer>(
[INFO] [stderr]     |                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::extra_unused_lifetimes)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes
[INFO] [stderr] 
[INFO] [stderr] warning: this lifetime isn't used in the function definition
[INFO] [stderr]    --> src/builder.rs:201:26
[INFO] [stderr]     |
[INFO] [stderr] 201 |     fn print_file_ranges<'a, P: Printer>(
[INFO] [stderr]     |                          ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]    --> src/printer.rs:247:18
[INFO] [stderr]     |
[INFO] [stderr] 247 |                 .unwrap_or("Invalid UTF-16LE".into()),
[INFO] [stderr]     |                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| "Invalid UTF-16LE".into())`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]    --> src/printer.rs:250:18
[INFO] [stderr]     |
[INFO] [stderr] 250 |                 .unwrap_or("Invalid UTF-16BE".into()),
[INFO] [stderr]     |                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| "Invalid UTF-16BE".into())`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `replace_nonprintable` doesn't need a mutable reference
[INFO] [stderr]    --> src/printer.rs:255:41
[INFO] [stderr]     |
[INFO] [stderr] 255 |             line = replace_nonprintable(&mut line, self.tab_width);
[INFO] [stderr]     |                                         ^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unnecessary_mut_passed)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]   --> src/output.rs:34:14
[INFO] [stderr]    |
[INFO] [stderr] 34 |             .unwrap_or(String::from("less"));
[INFO] [stderr]    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|| String::from("less"))`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::or_fun_call)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: use of `or` followed by a function call
[INFO] [stderr]   --> src/output.rs:33:14
[INFO] [stderr]    |
[INFO] [stderr] 33 |             .or(pager_from_env.ok())
[INFO] [stderr]    |              ^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `or_else(|| pager_from_env.ok())`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: this function has too many arguments (14/7)
[INFO] [stderr]    --> src/printer.rs:64:5
[INFO] [stderr]     |
[INFO] [stderr] 64  | /     pub fn new(
[INFO] [stderr] 65  | |         assets: &'a HighlightingAssets,
[INFO] [stderr] 66  | |         file: &InputFile,
[INFO] [stderr] 67  | |         reader: &mut InputFileReader,
[INFO] [stderr] ...   |
[INFO] [stderr] 136 | |         }
[INFO] [stderr] 137 | |     }
[INFO] [stderr]     | |_____^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::too_many_arguments)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]    --> src/printer.rs:247:18
[INFO] [stderr]     |
[INFO] [stderr] 247 |                 .unwrap_or("Invalid UTF-16LE".into()),
[INFO] [stderr]     |                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| "Invalid UTF-16LE".into())`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: use of `unwrap_or` followed by a function call
[INFO] [stderr]    --> src/printer.rs:250:18
[INFO] [stderr]     |
[INFO] [stderr] 250 |                 .unwrap_or("Invalid UTF-16BE".into()),
[INFO] [stderr]     |                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| "Invalid UTF-16BE".into())`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `replace_nonprintable` doesn't need a mutable reference
[INFO] [stderr]    --> src/printer.rs:255:41
[INFO] [stderr]     |
[INFO] [stderr] 255 |             line = replace_nonprintable(&mut line, self.tab_width);
[INFO] [stderr]     |                                         ^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unnecessary_mut_passed)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr]     Finished dev [unoptimized + debuginfo] target(s) in 24.93s
[INFO] running `"docker" "inspect" "a0d3ac73c13fb72b2b14299031240fe109cded7edb70eb06a662221458519140"`
[INFO] running `"docker" "rm" "-f" "a0d3ac73c13fb72b2b14299031240fe109cded7edb70eb06a662221458519140"`
[INFO] [stdout] a0d3ac73c13fb72b2b14299031240fe109cded7edb70eb06a662221458519140