[INFO] crate nbez 0.1.0 is already in cache
[INFO] extracting crate nbez 0.1.0 into work/ex/clippy-test-run/sources/stable/reg/nbez/0.1.0
[INFO] extracting crate nbez 0.1.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/nbez/0.1.0
[INFO] validating manifest of nbez-0.1.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of nbez-0.1.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing nbez-0.1.0
[INFO] finished frobbing nbez-0.1.0
[INFO] frobbed toml for nbez-0.1.0 written to work/ex/clippy-test-run/sources/stable/reg/nbez/0.1.0/Cargo.toml
[INFO] started frobbing nbez-0.1.0
[INFO] finished frobbing nbez-0.1.0
[INFO] frobbed toml for nbez-0.1.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/nbez/0.1.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting nbez-0.1.0 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-7/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/nbez/0.1.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] 05c1abdaa31cb6ecb30164430a9324eac0be0ef24e9fd2c20795392daf7390be
[INFO] running `"docker" "start" "-a" "05c1abdaa31cb6ecb30164430a9324eac0be0ef24e9fd2c20795392daf7390be"`
[INFO] [stderr]    Compiling nbez v0.1.0 (/opt/crater/workdir)
[INFO] [stderr]     Checking gfx_core v0.3.1
[INFO] [stderr]    Compiling gfx_gl v0.3.1
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/nbez.rs:23:13
[INFO] [stderr]    |
[INFO] [stderr] 23 |             start: start,
[INFO] [stderr]    |             ^^^^^^^^^^^^ help: replace it with: `start`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::redundant_field_names)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/nbez.rs:24:13
[INFO] [stderr]    |
[INFO] [stderr] 24 |             end: end
[INFO] [stderr]    |             ^^^^^^^^ help: replace it with: `end`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/nbez.rs:117:13
[INFO] [stderr]     |
[INFO] [stderr] 117 |             points: points,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^ help: replace it with: `points`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: using `println!("")`
[INFO] [stderr]    --> src/lib.rs:467:9
[INFO] [stderr]     |
[INFO] [stderr] 467 |         println!("");
[INFO] [stderr]     |         ^^^^^^^^^^^^ help: replace it with: `println!()`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::println_empty_string)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#println_empty_string
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]   --> src/nbez.rs:69:22
[INFO] [stderr]    |
[INFO] [stderr] 69 |             for k in 0..order + 1 {
[INFO] [stderr]    |                      ^^^^^^^^^^^^ help: use: `0..=order`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::range_plus_one)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: the variable `factor` is used as a loop counter. Consider using `for (factor, item) in points.iter().enumerate()` or similar iterators
[INFO] [stderr]    --> src/nbez.rs:154:22
[INFO] [stderr]     |
[INFO] [stderr] 154 |         for point in points.iter() {
[INFO] [stderr]     |                      ^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::explicit_counter_loop)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#explicit_counter_loop
[INFO] [stderr] 
[INFO] [stderr] warning: using `clone` on a `Copy` type
[INFO] [stderr]    --> src/nbez.rs:173:30
[INFO] [stderr]     |
[INFO] [stderr] 173 |         let mut point_last = points[0].clone();
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `points[0]`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::clone_on_copy)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
[INFO] [stderr] 
[INFO] [stderr] warning: You are using an explicit closure for cloning elements
[INFO] [stderr]    --> src/nbez.rs:175:22
[INFO] [stderr]     |
[INFO] [stderr] 175 |         for point in points[1..].iter().map(|p| *p) {
[INFO] [stderr]     |                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: Consider calling the dedicated `cloned` method: `points[1..].iter().cloned()`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::map_clone)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stderr] 
[INFO] [stderr] warning: You are using an explicit closure for cloning elements
[INFO] [stderr]    --> src/nbez.rs:196:23
[INFO] [stderr]     |
[INFO] [stderr] 196 |         for (i, p) in points.iter().map(|p| *p).enumerate().skip(1) {
[INFO] [stderr]     |                       ^^^^^^^^^^^^^^^^^^^^^^^^^ help: Consider calling the dedicated `cloned` method: `points.iter().cloned()`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stderr] 
[INFO] [stderr] warning: very complex type used. Consider factoring parts into `type` definitions
[INFO] [stderr]    --> src/nbez.rs:207:30
[INFO] [stderr]     |
[INFO] [stderr] 207 |     fn split(&self, _: F) -> Option<(NBez<F, P, C>, NBez<F, P, C>)> {
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::type_complexity)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::eval_order_dependence)] on by default
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:1:1
[INFO] [stderr]    |
[INFO] [stderr] 1  | / n_pointvector!{"2-dimensional point", "2-dimensional vector", 2; Point2d, Vector2d {
[INFO] [stderr] 2  | |     x,
[INFO] [stderr] 3  | |     y
[INFO] [stderr] 4  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:5:1
[INFO] [stderr]    |
[INFO] [stderr] 5  | / n_pointvector!{"3-dimensional point", "3-dimensional vector", 3; Point3d, Vector3d {
[INFO] [stderr] 6  | |     x,
[INFO] [stderr] 7  | |     y,
[INFO] [stderr] 8  | |     z
[INFO] [stderr] 9  | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]   --> src/macros.rs:99:27
[INFO] [stderr]    |
[INFO] [stderr] 99 |                       array[index as usize]
[INFO] [stderr]    |                             ^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]   --> src/macros.rs:98:21
[INFO] [stderr]    |
[INFO] [stderr] 98 |                       index += 1;
[INFO] [stderr]    |                       ^^^^^^^^^^
[INFO] [stderr]    | 
[INFO] [stderr]   ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:10:1
[INFO] [stderr]    |
[INFO] [stderr] 10 | / n_pointvector!{"4-dimensional point", "4-dimensional vector", 4; Point4d, Vector4d {
[INFO] [stderr] 11 | |     x,
[INFO] [stderr] 12 | |     y,
[INFO] [stderr] 13 | |     z,
[INFO] [stderr] 14 | |     w
[INFO] [stderr] 15 | | }}
[INFO] [stderr]    | |__- in this macro invocation
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/macros.rs:386:30
[INFO] [stderr]     |
[INFO] [stderr] 386 |                       for i in 1..$order {
[INFO] [stderr]     |                                ^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[deny(clippy::reverse_range_loop)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=1`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:16:1
[INFO] [stderr]     |
[INFO] [stderr] 16  | / n_bezier!{"Order 1 bezier curve", 1, 1; Bez1o {
[INFO] [stderr] 17  | |     start: 1,
[INFO] [stderr] 18  | |     end: 1
[INFO] [stderr] 19  | | } {
[INFO] [stderr] ...   |
[INFO] [stderr] 22  | |     end;
[INFO] [stderr] 23  | | } elevated Bez2o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:312:50
[INFO] [stderr]     |
[INFO] [stderr] 312 |                           let factor = F::from_f32(factor).unwrap();
[INFO] [stderr]     |                                                    ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=2`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:24:1
[INFO] [stderr]     |
[INFO] [stderr] 24  | / n_bezier!{"Order 2 bezier curve", 2, 3; Bez2o {
[INFO] [stderr] 25  | |     start: 1,
[INFO] [stderr] 26  | |     ctrl: 2,
[INFO] [stderr] 27  | |     end: 1
[INFO] [stderr] ...   |
[INFO] [stderr] 32  | |     end;
[INFO] [stderr] 33  | | } elevated Bez3o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:312:50
[INFO] [stderr]     |
[INFO] [stderr] 312 |                           let factor = F::from_f32(factor).unwrap();
[INFO] [stderr]     |                                                    ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=3`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:34:1
[INFO] [stderr]     |
[INFO] [stderr] 34  | / n_bezier!{"Order 3 bezier curve", 3, 6; Bez3o {
[INFO] [stderr] 35  | |     start: 1,
[INFO] [stderr] 36  | |     ctrl0: 3,
[INFO] [stderr] 37  | |     ctrl1: 3,
[INFO] [stderr] ...   |
[INFO] [stderr] 44  | |     end;
[INFO] [stderr] 45  | | } elevated Bez4o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:312:50
[INFO] [stderr]     |
[INFO] [stderr] 312 |                           let factor = F::from_f32(factor).unwrap();
[INFO] [stderr]     |                                                    ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=4`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:46:1
[INFO] [stderr]     |
[INFO] [stderr] 46  | / n_bezier!{"Order 4 bezier curve", 4, 10; Bez4o {
[INFO] [stderr] 47  | |     start: 1,
[INFO] [stderr] 48  | |     ctrl0: 4,
[INFO] [stderr] 49  | |     ctrl1: 6,
[INFO] [stderr] ...   |
[INFO] [stderr] 58  | |     end;
[INFO] [stderr] 59  | | } elevated Bez5o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:312:50
[INFO] [stderr]     |
[INFO] [stderr] 312 |                           let factor = F::from_f32(factor).unwrap();
[INFO] [stderr]     |                                                    ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=5`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:60:1
[INFO] [stderr]     |
[INFO] [stderr] 60  | / n_bezier!{"Order 5 bezier curve", 5, 15; Bez5o {
[INFO] [stderr] 61  | |     start: 1,
[INFO] [stderr] 62  | |     ctrl0: 5,
[INFO] [stderr] 63  | |     ctrl1: 10,
[INFO] [stderr] ...   |
[INFO] [stderr] 74  | |     end;
[INFO] [stderr] 75  | | } elevated Bez6o<F, P> }
[INFO] [stderr]     | |________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:268:31
[INFO] [stderr]     |
[INFO] [stderr] 268 |                           slice[index as usize]
[INFO] [stderr]     |                                 ^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:267:25
[INFO] [stderr]     |
[INFO] [stderr] 267 |                           index += 1;
[INFO] [stderr]     |                           ^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: unsequenced read of a variable
[INFO] [stderr]    --> src/macros.rs:312:50
[INFO] [stderr]     |
[INFO] [stderr] 312 |                           let factor = F::from_f32(factor).unwrap();
[INFO] [stderr]     |                                                    ^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr] note: whether read occurs before this write depends on evaluation order
[INFO] [stderr]    --> src/macros.rs:311:25
[INFO] [stderr]     |
[INFO] [stderr] 311 |                           factor += 1.0;
[INFO] [stderr]     |                           ^^^^^^^^^^^^^
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#eval_order_dependence
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/macros.rs:395:51
[INFO] [stderr]     |
[INFO] [stderr] 395 |                           $name::from_slice(&points[..$order + 1]).expect("left poly fail"),
[INFO] [stderr]     |                                                     ^^^^^^^^^^^^ help: use: `..=6`
[INFO] [stderr]     | 
[INFO] [stderr]    ::: /opt/crater/target/debug/build/nbez-32177669e738ad09/out/macro_invocs.rs:76:1
[INFO] [stderr]     |
[INFO] [stderr] 76  | / n_bezier!{"Order 6 bezier curve", 6, 21; Bez6o {
[INFO] [stderr] 77  | |     start: 1,
[INFO] [stderr] 78  | |     ctrl0: 6,
[INFO] [stderr] 79  | |     ctrl1: 15,
[INFO] [stderr] ...   |
[INFO] [stderr] 92  | |     end;
[INFO] [stderr] 93  | | } elevated NBez<F, P, [P; 8]> }
[INFO] [stderr]     | |_______________________________- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: use of `offset` with a `usize` casted to an `isize`
[INFO] [stderr]   --> src/lib.rs:62:27
[INFO] [stderr]    |
[INFO] [stderr] 62 |             self.points = self.points.offset(order as isize);
[INFO] [stderr]    |                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.points.add(order)`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::ptr_offset_with_cast)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_offset_with_cast
[INFO] [stderr] 
[INFO] [stderr] warning: use of `offset` with a `usize` casted to an `isize`
[INFO] [stderr]   --> src/lib.rs:89:47
[INFO] [stderr]    |
[INFO] [stderr] 89 |             let slice = slice::from_raw_parts(self.points.offset((end-order-1) as isize), order + 1);
[INFO] [stderr]    |                                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.points.add((end-order-1))`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_offset_with_cast
[INFO] [stderr] 
[INFO] [stderr] warning: explicit lifetimes given in parameter types where they could be elided (or replaced with `'_` if needed by type declaration)
[INFO] [stderr]    --> src/lib.rs:215:5
[INFO] [stderr]     |
[INFO] [stderr] 215 | /     fn interp_iter<'a>(&'a self, samples: u32) -> InterpIter<'a, F, Self> {
[INFO] [stderr] 216 | |         InterpIter {
[INFO] [stderr] 217 | |             curve: self,
[INFO] [stderr] 218 | |             t_nodiv: 0,
[INFO] [stderr] ...   |
[INFO] [stderr] 221 | |         }
[INFO] [stderr] 222 | |     }
[INFO] [stderr]     | |_____^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::needless_lifetimes)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to previous error
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `nbez`.
[INFO] [stderr] warning: build failed, waiting for other jobs to finish...
[INFO] [stderr] error: build failed
[INFO] running `"docker" "inspect" "05c1abdaa31cb6ecb30164430a9324eac0be0ef24e9fd2c20795392daf7390be"`
[INFO] running `"docker" "rm" "-f" "05c1abdaa31cb6ecb30164430a9324eac0be0ef24e9fd2c20795392daf7390be"`
[INFO] [stdout] 05c1abdaa31cb6ecb30164430a9324eac0be0ef24e9fd2c20795392daf7390be