[INFO] crate jbcrs-basic 0.1.4 is already in cache
[INFO] extracting crate jbcrs-basic 0.1.4 into work/ex/clippy-test-run/sources/stable/reg/jbcrs-basic/0.1.4
[INFO] extracting crate jbcrs-basic 0.1.4 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/jbcrs-basic/0.1.4
[INFO] validating manifest of jbcrs-basic-0.1.4 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of jbcrs-basic-0.1.4 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing jbcrs-basic-0.1.4
[INFO] finished frobbing jbcrs-basic-0.1.4
[INFO] frobbed toml for jbcrs-basic-0.1.4 written to work/ex/clippy-test-run/sources/stable/reg/jbcrs-basic/0.1.4/Cargo.toml
[INFO] started frobbing jbcrs-basic-0.1.4
[INFO] finished frobbing jbcrs-basic-0.1.4
[INFO] frobbed toml for jbcrs-basic-0.1.4 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/jbcrs-basic/0.1.4/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting jbcrs-basic-0.1.4 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-1/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/jbcrs-basic/0.1.4:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] beba8de136b0cb43ecd8eaceaeb3aeeb111b9d519885d7572391e65d34d7bfb4
[INFO] running `"docker" "start" "-a" "beba8de136b0cb43ecd8eaceaeb3aeeb111b9d519885d7572391e65d34d7bfb4"`
[INFO] [stderr]    Compiling yade v0.1.2
[INFO] [stderr]     Checking jbcrs-basic v0.1.4 (/opt/crater/workdir)
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:206:38
[INFO] [stderr]     |
[INFO] [stderr] 206 |         [0x00, 0xFE, 0x00, 0xAB] => [0x00FE00AB],
[INFO] [stderr]     |                                      ^^^^^^^^^^ help: consider: `0x00FE_00AB`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unreadable_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:207:38
[INFO] [stderr]     |
[INFO] [stderr] 207 |         [0xCA, 0xFE, 0xBA, 0xBE] => [0xCAFEBABE],
[INFO] [stderr]     |                                      ^^^^^^^^^^ help: consider: `0xCAFE_BABE`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:208:38
[INFO] [stderr]     |
[INFO] [stderr] 208 |         [0x00, 0x00, 0x00, 0x00] => [0x00000000],
[INFO] [stderr]     |                                      ^^^^^^^^^^ help: consider: `0x0000_0000`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:209:38
[INFO] [stderr]     |
[INFO] [stderr] 209 |         [0xFF, 0xFF, 0xFF, 0xFF] => [0xFFFFFFFF],
[INFO] [stderr]     |                                      ^^^^^^^^^^ help: consider: `0xFFFF_FFFF`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:213:62
[INFO] [stderr]     |
[INFO] [stderr] 213 |         [0x00, 0xFE, 0x00, 0xAB, 0xCD, 0x00, 0xEF, 0x00] => [0x00FE00AB_CD00EF00],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0x00FE_00AB_CD00_EF00`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::large_digit_groups)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:214:62
[INFO] [stderr]     |
[INFO] [stderr] 214 |         [0xCA, 0xFE, 0xBA, 0xBE, 0xCA, 0xFE, 0xD0, 0x0D] => [0xCAFEBABE_CAFED00D],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0xCAFE_BABE_CAFE_D00D`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:215:62
[INFO] [stderr]     |
[INFO] [stderr] 215 |         [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00] => [0x00000000_00000000],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0x0000_0000_0000_0000`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:216:62
[INFO] [stderr]     |
[INFO] [stderr] 216 |         [0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF] => [0xFFFFFFFF_FFFFFFFF],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0xFFFF_FFFF_FFFF_FFFF`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:233:39
[INFO] [stderr]     |
[INFO] [stderr] 233 |         [0xFF, 0x01, 0xFF, 0x55] => [-0x00FE00AB],
[INFO] [stderr]     |                                       ^^^^^^^^^^ help: consider: `0x00FE_00AB`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:234:39
[INFO] [stderr]     |
[INFO] [stderr] 234 |         [0xCA, 0xFE, 0xBA, 0xBE] => [-0x35014542],
[INFO] [stderr]     |                                       ^^^^^^^^^^ help: consider: `0x3501_4542`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:235:39
[INFO] [stderr]     |
[INFO] [stderr] 235 |         [0xFF, 0xFF, 0xFF, 0xFF] => [-0x00000001],
[INFO] [stderr]     |                                       ^^^^^^^^^^ help: consider: `0x0000_0001`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/parser/decode.rs:236:39
[INFO] [stderr]     |
[INFO] [stderr] 236 |         [0x00, 0x00, 0x00, 0x00] => [ 0x00000000],
[INFO] [stderr]     |                                       ^^^^^^^^^^ help: consider: `0x0000_0000`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:240:63
[INFO] [stderr]     |
[INFO] [stderr] 240 |         [0xA0, 0xFE, 0x00, 0xAB, 0xCD, 0x00, 0xEF, 0x00] => [-0x5F01FF54_32FF1100],
[INFO] [stderr]     |                                                               ^^^^^^^^^^^^^^^^^^^ help: consider: `0x5F01_FF54_32FF_1100`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:241:63
[INFO] [stderr]     |
[INFO] [stderr] 241 |         [0xA5, 0x01, 0x45, 0x41, 0x35, 0x01, 0x2F, 0xF3] => [-0x5AFEBABE_CAFED00D],
[INFO] [stderr]     |                                                               ^^^^^^^^^^^^^^^^^^^ help: consider: `0x5AFE_BABE_CAFE_D00D`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:242:62
[INFO] [stderr]     |
[INFO] [stderr] 242 |         [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00] => [0x00000000_00000000],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0x0000_0000_0000_0000`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: digit groups should be smaller
[INFO] [stderr]    --> src/parser/decode.rs:243:62
[INFO] [stderr]     |
[INFO] [stderr] 243 |         [0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF] => [0x7FFFFFFF_FFFFFFFF],
[INFO] [stderr]     |                                                              ^^^^^^^^^^^^^^^^^^^ help: consider: `0x7FFF_FFFF_FFFF_FFFF`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#large_digit_groups
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `with_capacity`
[INFO] [stderr]   --> src/writer/encode.rs:13:5
[INFO] [stderr]    |
[INFO] [stderr] 13 |     pub fn with_capacity(cap: usize) -> Encoder {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(dead_code)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `len`
[INFO] [stderr]   --> src/writer/encode.rs:19:5
[INFO] [stderr]    |
[INFO] [stderr] 19 |     pub fn len(&self) -> usize {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_u32`
[INFO] [stderr]   --> src/writer/encode.rs:45:5
[INFO] [stderr]    |
[INFO] [stderr] 45 |     pub fn write_u32(&mut self, u: u32) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_u64`
[INFO] [stderr]   --> src/writer/encode.rs:52:5
[INFO] [stderr]    |
[INFO] [stderr] 52 |     pub fn write_u64(&mut self, u: u64) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_i8`
[INFO] [stderr]   --> src/writer/encode.rs:59:5
[INFO] [stderr]    |
[INFO] [stderr] 59 |     pub fn write_i8(&mut self, u: i8) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_i16`
[INFO] [stderr]   --> src/writer/encode.rs:64:5
[INFO] [stderr]    |
[INFO] [stderr] 64 |     pub fn write_i16(&mut self, u: i16) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/parser/code.rs:254:22
[INFO] [stderr]     |
[INFO] [stderr] 254 |             for _ in low..(high + 1) {
[INFO] [stderr]     |                      ^^^^^^^^^^^^^^^ help: use: `low..=high`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::range_plus_one)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `with_capacity`
[INFO] [stderr]   --> src/writer/encode.rs:13:5
[INFO] [stderr]    |
[INFO] [stderr] 13 |     pub fn with_capacity(cap: usize) -> Encoder {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(dead_code)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `len`
[INFO] [stderr]   --> src/writer/encode.rs:19:5
[INFO] [stderr]    |
[INFO] [stderr] 19 |     pub fn len(&self) -> usize {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_u32`
[INFO] [stderr]   --> src/writer/encode.rs:45:5
[INFO] [stderr]    |
[INFO] [stderr] 45 |     pub fn write_u32(&mut self, u: u32) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_u64`
[INFO] [stderr]   --> src/writer/encode.rs:52:5
[INFO] [stderr]    |
[INFO] [stderr] 52 |     pub fn write_u64(&mut self, u: u64) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_i8`
[INFO] [stderr]   --> src/writer/encode.rs:59:5
[INFO] [stderr]    |
[INFO] [stderr] 59 |     pub fn write_i8(&mut self, u: i8) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: method is never used: `write_i16`
[INFO] [stderr]   --> src/writer/encode.rs:64:5
[INFO] [stderr]    |
[INFO] [stderr] 64 |     pub fn write_i16(&mut self, u: i16) {
[INFO] [stderr]    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: calling `as_bytes()` on a string literal
[INFO] [stderr]    --> src/parser/decode.rs:249:47
[INFO] [stderr]     |
[INFO] [stderr] 249 |         let mut decoder = super::Decoder::new("Hello, world!".as_bytes(), &mut cursor);
[INFO] [stderr]     |                                               ^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider using a byte string literal instead: `b"Hello, world!"`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::string_lit_as_bytes)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#string_lit_as_bytes
[INFO] [stderr] 
[INFO] [stderr] warning: an inclusive range would be more readable
[INFO] [stderr]    --> src/parser/code.rs:254:22
[INFO] [stderr]     |
[INFO] [stderr] 254 |             for _ in low..(high + 1) {
[INFO] [stderr]     |                      ^^^^^^^^^^^^^^^ help: use: `low..=high`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::range_plus_one)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#range_plus_one
[INFO] [stderr] 
[INFO] [stderr]     Finished dev [unoptimized + debuginfo] target(s) in 4.18s
[INFO] running `"docker" "inspect" "beba8de136b0cb43ecd8eaceaeb3aeeb111b9d519885d7572391e65d34d7bfb4"`
[INFO] running `"docker" "rm" "-f" "beba8de136b0cb43ecd8eaceaeb3aeeb111b9d519885d7572391e65d34d7bfb4"`
[INFO] [stdout] beba8de136b0cb43ecd8eaceaeb3aeeb111b9d519885d7572391e65d34d7bfb4