[INFO] crate glsl-layout 0.2.0 is already in cache
[INFO] extracting crate glsl-layout 0.2.0 into work/ex/clippy-test-run/sources/stable/reg/glsl-layout/0.2.0
[INFO] extracting crate glsl-layout 0.2.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/glsl-layout/0.2.0
[INFO] validating manifest of glsl-layout-0.2.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of glsl-layout-0.2.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing glsl-layout-0.2.0
[INFO] finished frobbing glsl-layout-0.2.0
[INFO] frobbed toml for glsl-layout-0.2.0 written to work/ex/clippy-test-run/sources/stable/reg/glsl-layout/0.2.0/Cargo.toml
[INFO] started frobbing glsl-layout-0.2.0
[INFO] finished frobbing glsl-layout-0.2.0
[INFO] frobbed toml for glsl-layout-0.2.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/glsl-layout/0.2.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting glsl-layout-0.2.0 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-2/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/glsl-layout/0.2.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] 767cec4bc0fd016070527d11af98d1cade9ac38fbf4e92ea6d33ac98f5581857
[INFO] running `"docker" "start" "-a" "767cec4bc0fd016070527d11af98d1cade9ac38fbf4e92ea6d33ac98f5581857"`
[INFO] [stderr]    Compiling syn v0.13.11
[INFO] [stderr]    Compiling glsl-layout-derive v0.2.0
[INFO] [stderr]     Checking glsl-layout v0.2.0 (/opt/crater/workdir)
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:262:13
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:262:13
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::zero_prefixed_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(1);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(0o1);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:262:13
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(1);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(0o1);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:263:13
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(002);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(2);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(0o2);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:264:13
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(003);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(3);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(0o3);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:265:13
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(004);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(4);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(0o4);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:266:13
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(005);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(5);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(0o5);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:267:13
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(006);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(6);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(0o6);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:268:13
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(007);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(7);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(0o7);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:269:13
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(008);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(8);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(0o8);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:270:13
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(009);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(9);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(0o9);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:271:13
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(010);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(10);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(0o10);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:272:13
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(011);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(11);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(0o11);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::zero_prefixed_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(1);
[INFO] [stderr]     |             ^
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:273:13
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(012);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(12);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(0o12);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(0o1);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:262:13
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(1);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 262 | impl_array!(0o1);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:263:13
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(002);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(2);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 263 | impl_array!(0o2);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:264:13
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(003);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(3);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 264 | impl_array!(0o3);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:265:13
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(004);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(4);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 265 | impl_array!(0o4);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:266:13
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(005);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(5);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 266 | impl_array!(0o5);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:267:13
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(006);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(6);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 267 | impl_array!(0o6);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:274:13
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(013);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(13);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(0o13);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:275:13
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(014);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(14);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(0o14);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:276:13
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(015);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(15);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(0o15);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:277:13
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(016);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(16);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(0o16);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:278:13
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(017);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(17);
[INFO] [stderr]     |             ^^
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:268:13
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(007);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(7);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 268 | impl_array!(0o7);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(0o17);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:269:13
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(008);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:279:13
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(018);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(18);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(0o18);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:280:13
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(019);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(19);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(0o19);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(8);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 269 | impl_array!(0o8);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:281:13
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(020);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(20);
[INFO] [stderr]     |             ^^
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:270:13
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(009);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(9);
[INFO] [stderr]     |             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(0o20);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 270 | impl_array!(0o9);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:282:13
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(021);
[INFO] [stderr]     |             ^^^
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:271:13
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(010);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(10);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 271 | impl_array!(0o10);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(21);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(0o21);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:272:13
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(011);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(11);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 272 | impl_array!(0o11);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:273:13
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(012);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(12);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 273 | impl_array!(0o12);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:283:13
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(022);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(22);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(0o22);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:274:13
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(013);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(13);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 274 | impl_array!(0o13);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:275:13
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(014);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(14);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 275 | impl_array!(0o14);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:276:13
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(015);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(15);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 276 | impl_array!(0o15);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:277:13
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(016);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(16);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 277 | impl_array!(0o16);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:278:13
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(017);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(17);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 278 | impl_array!(0o17);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:279:13
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(018);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(18);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 279 | impl_array!(0o18);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:284:13
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(023);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(23);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(0o23);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:280:13
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(019);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(19);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 280 | impl_array!(0o19);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:285:13
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(024);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(24);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(0o24);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:281:13
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(020);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(20);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 281 | impl_array!(0o20);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:282:13
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(021);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(21);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 282 | impl_array!(0o21);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:283:13
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(022);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(22);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 283 | impl_array!(0o22);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:284:13
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(023);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(23);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 284 | impl_array!(0o23);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:286:13
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(025);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(25);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(0o25);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:285:13
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(024);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(24);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 285 | impl_array!(0o24);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:287:13
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(026);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(26);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(0o26);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:286:13
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(025);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(25);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 286 | impl_array!(0o25);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:287:13
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(026);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(26);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 287 | impl_array!(0o26);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:288:13
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(027);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(27);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(0o27);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:289:13
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(028);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(28);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(0o28);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:290:13
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(029);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(29);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(0o29);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:291:13
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(030);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(30);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(0o30);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:292:13
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(031);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(31);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(0o31);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:293:13
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(032);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(32);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(0o32);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:288:13
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(027);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(27);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 288 | impl_array!(0o27);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:289:13
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(028);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(28);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 289 | impl_array!(0o28);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:290:13
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(029);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(29);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 290 | impl_array!(0o29);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:291:13
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(030);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(30);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 291 | impl_array!(0o30);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:292:13
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(031);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(31);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 292 | impl_array!(0o31);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/array.rs:293:13
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(032);
[INFO] [stderr]     |             ^^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(32);
[INFO] [stderr]     |             ^^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 293 | impl_array!(0o32);
[INFO] [stderr]     |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this if-then-else expression returns a bool literal
[INFO] [stderr]   --> src/scalar.rs:39:9
[INFO] [stderr]    |
[INFO] [stderr] 39 | /         if value.0 == 0 {
[INFO] [stderr] 40 | |             false
[INFO] [stderr] 41 | |         } else {
[INFO] [stderr] 42 | |             true
[INFO] [stderr] 43 | |         }
[INFO] [stderr]    | |_________^ help: you can reduce it to: `!(value.0 == 0)`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_bool)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_bool
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:184:30
[INFO] [stderr]     |
[INFO] [stderr] 184 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[deny(clippy::reverse_range_loop)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unnecessary_mut_passed)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:225:30
[INFO] [stderr]     |
[INFO] [stderr] 225 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:245:30
[INFO] [stderr]     |
[INFO] [stderr] 245 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 263 | impl_array!(002);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 264 | impl_array!(003);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 265 | impl_array!(004);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 266 | impl_array!(005);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 267 | impl_array!(006);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 268 | impl_array!(007);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 269 | impl_array!(008);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 270 | impl_array!(009);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 271 | impl_array!(010);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 272 | impl_array!(011);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 273 | impl_array!(012);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 274 | impl_array!(013);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 275 | impl_array!(014);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 276 | impl_array!(015);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 277 | impl_array!(016);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 278 | impl_array!(017);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 279 | impl_array!(018);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 280 | impl_array!(019);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 281 | impl_array!(020);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 282 | impl_array!(021);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 283 | impl_array!(022);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 284 | impl_array!(023);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | impl_array!(024);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: this if-then-else expression returns a bool literal
[INFO] [stderr]   --> src/scalar.rs:39:9
[INFO] [stderr]    |
[INFO] [stderr] 39 | /         if value.0 == 0 {
[INFO] [stderr] 40 | |             false
[INFO] [stderr] 41 | |         } else {
[INFO] [stderr] 42 | |             true
[INFO] [stderr] 43 | |         }
[INFO] [stderr]    | |_________^ help: you can reduce it to: `!(value.0 == 0)`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_bool)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_bool
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 286 | impl_array!(025);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 287 | impl_array!(026);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 288 | impl_array!(027);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 289 | impl_array!(028);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 290 | impl_array!(029);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 291 | impl_array!(030);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 292 | impl_array!(031);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 293 | impl_array!(032);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:184:30
[INFO] [stderr]     |
[INFO] [stderr] 184 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[deny(clippy::reverse_range_loop)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unnecessary_mut_passed)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:225:30
[INFO] [stderr]     |
[INFO] [stderr] 225 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] error: this range is empty so this for loop will never run
[INFO] [stderr]    --> src/array.rs:245:30
[INFO] [stderr]     |
[INFO] [stderr] 245 |                     for i in 0..$size {
[INFO] [stderr]     |                              ^
[INFO] [stderr] ...
[INFO] [stderr] 261 | impl_array!(000);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#reverse_range_loop
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 262 | impl_array!(001);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 263 | impl_array!(002);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to 3 previous errors
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 264 | impl_array!(003);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 265 | impl_array!(004);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 266 | impl_array!(005);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 267 | impl_array!(006);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `glsl-layout`.
[INFO] [stderr] warning: build failed, waiting for other jobs to finish...
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 268 | impl_array!(007);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 269 | impl_array!(008);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 270 | impl_array!(009);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 271 | impl_array!(010);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 272 | impl_array!(011);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 273 | impl_array!(012);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 274 | impl_array!(013);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 275 | impl_array!(014);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 276 | impl_array!(015);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 277 | impl_array!(016);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 278 | impl_array!(017);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 279 | impl_array!(018);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 280 | impl_array!(019);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 281 | impl_array!(020);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 282 | impl_array!(021);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 283 | impl_array!(022);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 284 | impl_array!(023);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 285 | impl_array!(024);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 286 | impl_array!(025);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 287 | impl_array!(026);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 288 | impl_array!(027);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 289 | impl_array!(028);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 290 | impl_array!(029);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 291 | impl_array!(030);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 292 | impl_array!(031);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] warning: The function/method `read` doesn't need a mutable reference
[INFO] [stderr]    --> src/array.rs:185:54
[INFO] [stderr]     |
[INFO] [stderr] 185 |                         write(&mut result[i], f(read(&mut values[i])));
[INFO] [stderr]     |                                                      ^^^^^^^^^^^^^^
[INFO] [stderr] ...
[INFO] [stderr] 293 | impl_array!(032);
[INFO] [stderr]     | ----------------- in this macro invocation
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_mut_passed
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to 3 previous errors
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `glsl-layout`.
[INFO] [stderr] 
[INFO] [stderr] To learn more, run the command again with --verbose.
[INFO] running `"docker" "inspect" "767cec4bc0fd016070527d11af98d1cade9ac38fbf4e92ea6d33ac98f5581857"`
[INFO] running `"docker" "rm" "-f" "767cec4bc0fd016070527d11af98d1cade9ac38fbf4e92ea6d33ac98f5581857"`
[INFO] [stdout] 767cec4bc0fd016070527d11af98d1cade9ac38fbf4e92ea6d33ac98f5581857