[INFO] crate bronze 0.1.0 is already in cache
[INFO] extracting crate bronze 0.1.0 into work/ex/clippy-test-run/sources/stable/reg/bronze/0.1.0
[INFO] extracting crate bronze 0.1.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/bronze/0.1.0
[INFO] validating manifest of bronze-0.1.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of bronze-0.1.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing bronze-0.1.0
[INFO] finished frobbing bronze-0.1.0
[INFO] frobbed toml for bronze-0.1.0 written to work/ex/clippy-test-run/sources/stable/reg/bronze/0.1.0/Cargo.toml
[INFO] started frobbing bronze-0.1.0
[INFO] finished frobbing bronze-0.1.0
[INFO] frobbed toml for bronze-0.1.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/bronze/0.1.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting bronze-0.1.0 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-3/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/bronze/0.1.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] 955cabf361d6c943b20dcd10071a749ee4417ef958fb023daec89eacd850697f
[INFO] running `"docker" "start" "-a" "955cabf361d6c943b20dcd10071a749ee4417ef958fb023daec89eacd850697f"`
[INFO] [stderr]     Checking bronze v0.1.0 (/opt/crater/workdir)
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:232:13
[INFO] [stderr]     |
[INFO] [stderr] 232 |             number: number,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^ help: replace it with: `number`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::redundant_field_names)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:233:13
[INFO] [stderr]     |
[INFO] [stderr] 233 |             value: value
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `value`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:318:13
[INFO] [stderr]     |
[INFO] [stderr] 318 |             version: version,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `version`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:319:13
[INFO] [stderr]     |
[INFO] [stderr] 319 |             mtype: mtype,
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `mtype`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:320:13
[INFO] [stderr]     |
[INFO] [stderr] 320 |             code: code,
[INFO] [stderr]     |             ^^^^^^^^^^ help: replace it with: `code`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:321:13
[INFO] [stderr]     |
[INFO] [stderr] 321 |             mid: mid,
[INFO] [stderr]     |             ^^^^^^^^ help: replace it with: `mid`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:322:13
[INFO] [stderr]     |
[INFO] [stderr] 322 |             token: token,
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `token`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:323:13
[INFO] [stderr]     |
[INFO] [stderr] 323 |             options: options,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `options`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:324:13
[INFO] [stderr]     |
[INFO] [stderr] 324 |             payload: payload,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `payload`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:17:18
[INFO] [stderr]    |
[INFO] [stderr] 17 |         Endpoint{local_addr: local_addr}
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `local_addr`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:52:13
[INFO] [stderr]    |
[INFO] [stderr] 52 |             sock: sock,
[INFO] [stderr]    |             ^^^^^^^^^^ help: replace it with: `sock`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:53:13
[INFO] [stderr]    |
[INFO] [stderr] 53 |             handler: handler
[INFO] [stderr]    |             ^^^^^^^^^^^^^^^^ help: replace it with: `handler`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:232:13
[INFO] [stderr]     |
[INFO] [stderr] 232 |             number: number,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^ help: replace it with: `number`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::redundant_field_names)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:233:13
[INFO] [stderr]     |
[INFO] [stderr] 233 |             value: value
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `value`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:318:13
[INFO] [stderr]     |
[INFO] [stderr] 318 |             version: version,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `version`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:319:13
[INFO] [stderr]     |
[INFO] [stderr] 319 |             mtype: mtype,
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `mtype`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:320:13
[INFO] [stderr]     |
[INFO] [stderr] 320 |             code: code,
[INFO] [stderr]     |             ^^^^^^^^^^ help: replace it with: `code`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:321:13
[INFO] [stderr]     |
[INFO] [stderr] 321 |             mid: mid,
[INFO] [stderr]     |             ^^^^^^^^ help: replace it with: `mid`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:322:13
[INFO] [stderr]     |
[INFO] [stderr] 322 |             token: token,
[INFO] [stderr]     |             ^^^^^^^^^^^^ help: replace it with: `token`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:323:13
[INFO] [stderr]     |
[INFO] [stderr] 323 |             options: options,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `options`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]    --> src/message.rs:324:13
[INFO] [stderr]     |
[INFO] [stderr] 324 |             payload: payload,
[INFO] [stderr]     |             ^^^^^^^^^^^^^^^^ help: replace it with: `payload`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:17:18
[INFO] [stderr]    |
[INFO] [stderr] 17 |         Endpoint{local_addr: local_addr}
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `local_addr`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:52:13
[INFO] [stderr]    |
[INFO] [stderr] 52 |             sock: sock,
[INFO] [stderr]    |             ^^^^^^^^^^ help: replace it with: `sock`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: redundant field names in struct initialization
[INFO] [stderr]   --> src/endpoint.rs:53:13
[INFO] [stderr]    |
[INFO] [stderr] 53 |             handler: handler
[INFO] [stderr]    |             ^^^^^^^^^^^^^^^^ help: replace it with: `handler`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:116:34
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,01),
[INFO] [stderr]     |                                  ^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::zero_prefixed_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,1),
[INFO] [stderr]     |                                  ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,0o1),
[INFO] [stderr]     |                                  ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:117:35
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,02),
[INFO] [stderr]     |                                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,2),
[INFO] [stderr]     |                                   ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,0o2),
[INFO] [stderr]     |                                   ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:118:34
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,03),
[INFO] [stderr]     |                                  ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,3),
[INFO] [stderr]     |                                  ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,0o3),
[INFO] [stderr]     |                                  ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:119:37
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,04),
[INFO] [stderr]     |                                     ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,4),
[INFO] [stderr]     |                                     ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,0o4),
[INFO] [stderr]     |                                     ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:120:38
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,01),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,1),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,0o1),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:121:38
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,02),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,2),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,0o2),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:122:36
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,03),
[INFO] [stderr]     |                                    ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,3),
[INFO] [stderr]     |                                    ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,0o3),
[INFO] [stderr]     |                                    ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:123:38
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,04),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,4),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,0o4),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:124:38
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,05),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,5),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,0o5),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:126:43
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,01),
[INFO] [stderr]     |                                           ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,1),
[INFO] [stderr]     |                                           ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,0o1),
[INFO] [stderr]     |                                           ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:127:40
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,02),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,2),
[INFO] [stderr]     |                                        ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,0o2),
[INFO] [stderr]     |                                        ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:128:40
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,03),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,3),
[INFO] [stderr]     |                                        ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,0o3),
[INFO] [stderr]     |                                        ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:129:39
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,04),
[INFO] [stderr]     |                                       ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,4),
[INFO] [stderr]     |                                       ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,0o4),
[INFO] [stderr]     |                                       ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:130:47
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,05),
[INFO] [stderr]     |                                               ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,5),
[INFO] [stderr]     |                                               ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,0o5),
[INFO] [stderr]     |                                               ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:131:44
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,06),
[INFO] [stderr]     |                                            ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,6),
[INFO] [stderr]     |                                            ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,0o6),
[INFO] [stderr]     |                                            ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:136:45
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,01),
[INFO] [stderr]     |                                             ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,1),
[INFO] [stderr]     |                                             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,0o1),
[INFO] [stderr]     |                                             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:137:41
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,02),
[INFO] [stderr]     |                                         ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,2),
[INFO] [stderr]     |                                         ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,0o2),
[INFO] [stderr]     |                                         ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:138:49
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,03),
[INFO] [stderr]     |                                                 ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,3),
[INFO] [stderr]     |                                                 ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,0o3),
[INFO] [stderr]     |                                                 ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:139:45
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,04),
[INFO] [stderr]     |                                             ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,4),
[INFO] [stderr]     |                                             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,0o4),
[INFO] [stderr]     |                                             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:140:51
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,05),
[INFO] [stderr]     |                                                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,5),
[INFO] [stderr]     |                                                   ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,0o5),
[INFO] [stderr]     |                                                   ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: operator precedence can trip the unwary
[INFO] [stderr]    --> src/message.rs:288:30
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider parenthesizing your expression: `((pkt[i-1] as u16) << 8) | (pkt[i] as u16 + 269)`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::precedence)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#precedence
[INFO] [stderr] 
[INFO] [stderr] warning: unused import: `message::Message`
[INFO] [stderr]  --> src/endpoint.rs:3:5
[INFO] [stderr]   |
[INFO] [stderr] 3 | use message::Message;
[INFO] [stderr]   |     ^^^^^^^^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(unused_imports)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:116:34
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,01),
[INFO] [stderr]     |                                  ^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::zero_prefixed_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,1),
[INFO] [stderr]     |                                  ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 116 |             Code::Get => code!(0,0o1),
[INFO] [stderr]     |                                  ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:117:35
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,02),
[INFO] [stderr]     |                                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,2),
[INFO] [stderr]     |                                   ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 117 |             Code::Post => code!(0,0o2),
[INFO] [stderr]     |                                   ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:118:34
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,03),
[INFO] [stderr]     |                                  ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,3),
[INFO] [stderr]     |                                  ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 118 |             Code::Put => code!(0,0o3),
[INFO] [stderr]     |                                  ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:119:37
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,04),
[INFO] [stderr]     |                                     ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,4),
[INFO] [stderr]     |                                     ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 119 |             Code::Delete => code!(0,0o4),
[INFO] [stderr]     |                                     ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:120:38
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,01),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,1),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 120 |             Code::Created => code!(2,0o1),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:121:38
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,02),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,2),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 121 |             Code::Deleted => code!(2,0o2),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:122:36
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,03),
[INFO] [stderr]     |                                    ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,3),
[INFO] [stderr]     |                                    ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 122 |             Code::Valid => code!(2,0o3),
[INFO] [stderr]     |                                    ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:123:38
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,04),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,4),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 123 |             Code::Changed => code!(2,0o4),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:124:38
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,05),
[INFO] [stderr]     |                                      ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,5),
[INFO] [stderr]     |                                      ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 124 |             Code::Content => code!(2,0o5),
[INFO] [stderr]     |                                      ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:126:43
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,01),
[INFO] [stderr]     |                                           ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,1),
[INFO] [stderr]     |                                           ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 126 |             Code::Unauthorized => code!(4,0o1),
[INFO] [stderr]     |                                           ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:127:40
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,02),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,2),
[INFO] [stderr]     |                                        ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 127 |             Code::BadOption => code!(4,0o2),
[INFO] [stderr]     |                                        ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:128:40
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,03),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,3),
[INFO] [stderr]     |                                        ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 128 |             Code::Forbidden => code!(4,0o3),
[INFO] [stderr]     |                                        ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:129:39
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,04),
[INFO] [stderr]     |                                       ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,4),
[INFO] [stderr]     |                                       ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 129 |             Code::NotFound => code!(4,0o4),
[INFO] [stderr]     |                                       ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:130:47
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,05),
[INFO] [stderr]     |                                               ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,5),
[INFO] [stderr]     |                                               ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 130 |             Code::MethodNotAllowed => code!(4,0o5),
[INFO] [stderr]     |                                               ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:131:44
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,06),
[INFO] [stderr]     |                                            ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,6),
[INFO] [stderr]     |                                            ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 131 |             Code::NotAcceptable => code!(4,0o6),
[INFO] [stderr]     |                                            ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:136:45
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,01),
[INFO] [stderr]     |                                             ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,1),
[INFO] [stderr]     |                                             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 136 |             Code::NotImplemented => code!(5,0o1),
[INFO] [stderr]     |                                             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:137:41
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,02),
[INFO] [stderr]     |                                         ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,2),
[INFO] [stderr]     |                                         ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 137 |             Code::BadGateway => code!(5,0o2),
[INFO] [stderr]     |                                         ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:138:49
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,03),
[INFO] [stderr]     |                                                 ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,3),
[INFO] [stderr]     |                                                 ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 138 |             Code::ServiceUnavailable => code!(5,0o3),
[INFO] [stderr]     |                                                 ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:139:45
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,04),
[INFO] [stderr]     |                                             ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,4),
[INFO] [stderr]     |                                             ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 139 |             Code::GatewayTimeout => code!(5,0o4),
[INFO] [stderr]     |                                             ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: this is a decimal constant
[INFO] [stderr]    --> src/message.rs:140:51
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,05),
[INFO] [stderr]     |                                                   ^^
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#zero_prefixed_literal
[INFO] [stderr] help: if you mean to use a decimal constant, remove the `0` to remove confusion
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,5),
[INFO] [stderr]     |                                                   ^
[INFO] [stderr] help: if you mean to use an octal constant, use `0o`
[INFO] [stderr]     |
[INFO] [stderr] 140 |             Code::ProxyingNotSupported => code!(5,0o5),
[INFO] [stderr]     |                                                   ^^^
[INFO] [stderr] 
[INFO] [stderr] warning: operator precedence can trip the unwary
[INFO] [stderr]    --> src/message.rs:288:30
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider parenthesizing your expression: `((pkt[i-1] as u16) << 8) | (pkt[i] as u16 + 269)`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::precedence)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#precedence
[INFO] [stderr] 
[INFO] [stderr] warning: unused import: `message::Message`
[INFO] [stderr]  --> src/endpoint.rs:3:5
[INFO] [stderr]   |
[INFO] [stderr] 3 | use message::Message;
[INFO] [stderr]   |     ^^^^^^^^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(unused_imports)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:255:20
[INFO] [stderr]     |
[INFO] [stderr] 255 |         let mid = ((pkt[2] as u16) << 8) | pkt[3] as u16;
[INFO] [stderr]     |                    ^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[2])`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::cast_lossless)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:255:44
[INFO] [stderr]     |
[INFO] [stderr] 255 |         let mid = ((pkt[2] as u16) << 8) | pkt[3] as u16;
[INFO] [stderr]     |                                            ^^^^^^^^^^^^^ help: try: `u16::from(pkt[3])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:279:33
[INFO] [stderr]     |
[INFO] [stderr] 279 |                 d @ 0 ... 12 => d as u16,
[INFO] [stderr]     |                                 ^^^^^^^^ help: try: `u16::from(d)`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:280:30
[INFO] [stderr]     |
[INFO] [stderr] 280 |                 13 => {i+=1; pkt[i] as u16 + 13},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:281:32
[INFO] [stderr]     |
[INFO] [stderr] 281 |                 14 => {i+=2; (((pkt[i-1] as u16) << 8) | pkt[i] as u16) + 269},
[INFO] [stderr]     |                                ^^^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[i-1])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:281:58
[INFO] [stderr]     |
[INFO] [stderr] 281 |                 14 => {i+=2; (((pkt[i-1] as u16) << 8) | pkt[i] as u16) + 269},
[INFO] [stderr]     |                                                          ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:286:33
[INFO] [stderr]     |
[INFO] [stderr] 286 |                 d @ 0 ... 12 => d as u16,
[INFO] [stderr]     |                                 ^^^^^^^^ help: try: `u16::from(d)`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:287:30
[INFO] [stderr]     |
[INFO] [stderr] 287 |                 13 => {i+=1; pkt[i] as u16 + 13},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:288:31
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                               ^^^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[i-1])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:288:57
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                                                         ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: length comparison to zero
[INFO] [stderr]    --> src/message.rs:385:12
[INFO] [stderr]     |
[INFO] [stderr] 385 |         if self.payload.len() > 0 {
[INFO] [stderr]     |            ^^^^^^^^^^^^^^^^^^^^^^ help: using `is_empty` is clearer and more explicit: `!self.payload.is_empty()`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::len_zero)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
[INFO] [stderr] 
[INFO] [stderr] warning: you seem to be trying to use match for destructuring a single pattern. Consider using `if let`
[INFO] [stderr]   --> src/endpoint.rs:70:17
[INFO] [stderr]    |
[INFO] [stderr] 70 | /                 match (self.handler).handle_request(addr, pkt) {
[INFO] [stderr] 71 | |                     Some(resp) => {
[INFO] [stderr] 72 | |                         self.sock.send_to(&resp, &addr).unwrap_or(None); // UDP is best-effort, right?
[INFO] [stderr] 73 | |                     },
[INFO] [stderr] 74 | |                     None => ()
[INFO] [stderr] 75 | |                 }
[INFO] [stderr]    | |_________________^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::single_match)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stderr] help: try this
[INFO] [stderr]    |
[INFO] [stderr] 70 |                 if let Some(resp) = (self.handler).handle_request(addr, pkt) {
[INFO] [stderr] 71 |     self.sock.send_to(&resp, &addr).unwrap_or(None); // UDP is best-effort, right?
[INFO] [stderr] 72 | }
[INFO] [stderr]    |
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:255:20
[INFO] [stderr]     |
[INFO] [stderr] 255 |         let mid = ((pkt[2] as u16) << 8) | pkt[3] as u16;
[INFO] [stderr]     |                    ^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[2])`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::cast_lossless)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:255:44
[INFO] [stderr]     |
[INFO] [stderr] 255 |         let mid = ((pkt[2] as u16) << 8) | pkt[3] as u16;
[INFO] [stderr]     |                                            ^^^^^^^^^^^^^ help: try: `u16::from(pkt[3])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:279:33
[INFO] [stderr]     |
[INFO] [stderr] 279 |                 d @ 0 ... 12 => d as u16,
[INFO] [stderr]     |                                 ^^^^^^^^ help: try: `u16::from(d)`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:280:30
[INFO] [stderr]     |
[INFO] [stderr] 280 |                 13 => {i+=1; pkt[i] as u16 + 13},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:281:32
[INFO] [stderr]     |
[INFO] [stderr] 281 |                 14 => {i+=2; (((pkt[i-1] as u16) << 8) | pkt[i] as u16) + 269},
[INFO] [stderr]     |                                ^^^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[i-1])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:281:58
[INFO] [stderr]     |
[INFO] [stderr] 281 |                 14 => {i+=2; (((pkt[i-1] as u16) << 8) | pkt[i] as u16) + 269},
[INFO] [stderr]     |                                                          ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:286:33
[INFO] [stderr]     |
[INFO] [stderr] 286 |                 d @ 0 ... 12 => d as u16,
[INFO] [stderr]     |                                 ^^^^^^^^ help: try: `u16::from(d)`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:287:30
[INFO] [stderr]     |
[INFO] [stderr] 287 |                 13 => {i+=1; pkt[i] as u16 + 13},
[INFO] [stderr]     |                              ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:288:31
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                               ^^^^^^^^^^^^^^^^^ help: try: `u16::from(pkt[i-1])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: casting u8 to u16 may become silently lossy if types change
[INFO] [stderr]    --> src/message.rs:288:57
[INFO] [stderr]     |
[INFO] [stderr] 288 |                 14 => {i+=2; ((pkt[i-1] as u16) << 8) | pkt[i] as u16 + 269},
[INFO] [stderr]     |                                                         ^^^^^^^^^^^^^ help: try: `u16::from(pkt[i])`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless
[INFO] [stderr] 
[INFO] [stderr] warning: length comparison to zero
[INFO] [stderr]    --> src/message.rs:385:12
[INFO] [stderr]     |
[INFO] [stderr] 385 |         if self.payload.len() > 0 {
[INFO] [stderr]     |            ^^^^^^^^^^^^^^^^^^^^^^ help: using `is_empty` is clearer and more explicit: `!self.payload.is_empty()`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::len_zero)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
[INFO] [stderr] 
[INFO] [stderr] warning: you seem to be trying to use match for destructuring a single pattern. Consider using `if let`
[INFO] [stderr]   --> src/endpoint.rs:70:17
[INFO] [stderr]    |
[INFO] [stderr] 70 | /                 match (self.handler).handle_request(addr, pkt) {
[INFO] [stderr] 71 | |                     Some(resp) => {
[INFO] [stderr] 72 | |                         self.sock.send_to(&resp, &addr).unwrap_or(None); // UDP is best-effort, right?
[INFO] [stderr] 73 | |                     },
[INFO] [stderr] 74 | |                     None => ()
[INFO] [stderr] 75 | |                 }
[INFO] [stderr]    | |_________________^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::single_match)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stderr] help: try this
[INFO] [stderr]    |
[INFO] [stderr] 70 |                 if let Some(resp) = (self.handler).handle_request(addr, pkt) {
[INFO] [stderr] 71 |     self.sock.send_to(&resp, &addr).unwrap_or(None); // UDP is best-effort, right?
[INFO] [stderr] 72 | }
[INFO] [stderr]    |
[INFO] [stderr] 
[INFO] [stderr]     Finished dev [unoptimized + debuginfo] target(s) in 5.56s
[INFO] running `"docker" "inspect" "955cabf361d6c943b20dcd10071a749ee4417ef958fb023daec89eacd850697f"`
[INFO] running `"docker" "rm" "-f" "955cabf361d6c943b20dcd10071a749ee4417ef958fb023daec89eacd850697f"`
[INFO] [stdout] 955cabf361d6c943b20dcd10071a749ee4417ef958fb023daec89eacd850697f