[INFO] crate binary_tuples 0.1.1 is already in cache
[INFO] extracting crate binary_tuples 0.1.1 into work/ex/clippy-test-run/sources/stable/reg/binary_tuples/0.1.1
[INFO] extracting crate binary_tuples 0.1.1 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/binary_tuples/0.1.1
[INFO] validating manifest of binary_tuples-0.1.1 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of binary_tuples-0.1.1 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing binary_tuples-0.1.1
[INFO] finished frobbing binary_tuples-0.1.1
[INFO] frobbed toml for binary_tuples-0.1.1 written to work/ex/clippy-test-run/sources/stable/reg/binary_tuples/0.1.1/Cargo.toml
[INFO] started frobbing binary_tuples-0.1.1
[INFO] finished frobbing binary_tuples-0.1.1
[INFO] frobbed toml for binary_tuples-0.1.1 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/binary_tuples/0.1.1/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting binary_tuples-0.1.1 against stable for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-4/stable:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable/reg/binary_tuples/0.1.1:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] cadcce35feb5ca6bbeaffc3f7bc741fc7b09441a20fb6d32f410bd006dd511d9
[INFO] running `"docker" "start" "-a" "cadcce35feb5ca6bbeaffc3f7bc741fc7b09441a20fb6d32f410bd006dd511d9"`
[INFO] [stderr]     Checking binary_tuples v0.1.1 (/opt/crater/workdir)
[INFO] [stderr] warning: unneeded return statement
[INFO] [stderr]    --> src/segment.rs:264:9
[INFO] [stderr]     |
[INFO] [stderr] 264 |         return Ok((segments, index))
[INFO] [stderr]     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove `return` as shown: `Ok((segments, index))`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::needless_return)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]   --> src/utils.rs:11:16
[INFO] [stderr]    |
[INFO] [stderr] 11 |           } else {
[INFO] [stderr]    |  ________________^
[INFO] [stderr] 12 | |             if vals[0] == 0 {
[INFO] [stderr] 13 | |                 read += 1;
[INFO] [stderr] 14 | |                 if vals[1] != 0xFF {
[INFO] [stderr] ...  |
[INFO] [stderr] 23 | |             }
[INFO] [stderr] 24 | |         }
[INFO] [stderr]    | |_________^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::collapsible_if)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]    |
[INFO] [stderr] 11 |         } else if vals[0] == 0 {
[INFO] [stderr] 12 |     read += 1;
[INFO] [stderr] 13 |     if vals[1] != 0xFF {
[INFO] [stderr] 14 |         return (read, bytes)
[INFO] [stderr] 15 |     } else {
[INFO] [stderr] 16 |         bytes.push(vals[0]);
[INFO] [stderr]  ...
[INFO] [stderr] 
[INFO] [stderr] warning: unneeded return statement
[INFO] [stderr]    --> src/segment.rs:264:9
[INFO] [stderr]     |
[INFO] [stderr] 264 |         return Ok((segments, index))
[INFO] [stderr]     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove `return` as shown: `Ok((segments, index))`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::needless_return)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
[INFO] [stderr] 
[INFO] [stderr] warning: returning the result of a let binding from a block. Consider returning the expression directly.
[INFO] [stderr]    --> src/segment.rs:293:9
[INFO] [stderr]     |
[INFO] [stderr] 293 |         value
[INFO] [stderr]     |         ^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::let_and_return)] on by default
[INFO] [stderr] note: this expression can be directly returned
[INFO] [stderr]    --> src/segment.rs:292:21
[INFO] [stderr]     |
[INFO] [stderr] 292 |         let value = result.drain(0..1).next().unwrap();
[INFO] [stderr]     |                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/segment.rs:586:43
[INFO] [stderr]     |
[INFO] [stderr] 586 |         assert_eq!(result, Segment::Float(1.0039063));
[INFO] [stderr]     |                                           ^^^^^^^^^ help: consider: `1.003_906_3`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unreadable_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/segment.rs:607:44
[INFO] [stderr]     |
[INFO] [stderr] 607 |         assert_eq!(result, Segment::Double(1.05859375));
[INFO] [stderr]     |                                            ^^^^^^^^^^ help: consider: `1.058_593_75`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/segment.rs:621:44
[INFO] [stderr]     |
[INFO] [stderr] 621 |         assert_eq!(result, Segment::Double(31610.716851562498));
[INFO] [stderr]     |                                            ^^^^^^^^^^^^^^^^^^ help: consider: `31_610.716_851_562_498`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: this `else { if .. }` block can be collapsed
[INFO] [stderr]   --> src/utils.rs:11:16
[INFO] [stderr]    |
[INFO] [stderr] 11 |           } else {
[INFO] [stderr]    |  ________________^
[INFO] [stderr] 12 | |             if vals[0] == 0 {
[INFO] [stderr] 13 | |                 read += 1;
[INFO] [stderr] 14 | |                 if vals[1] != 0xFF {
[INFO] [stderr] ...  |
[INFO] [stderr] 23 | |             }
[INFO] [stderr] 24 | |         }
[INFO] [stderr]    | |_________^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::collapsible_if)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_if
[INFO] [stderr] help: try
[INFO] [stderr]    |
[INFO] [stderr] 11 |         } else if vals[0] == 0 {
[INFO] [stderr] 12 |     read += 1;
[INFO] [stderr] 13 |     if vals[1] != 0xFF {
[INFO] [stderr] 14 |         return (read, bytes)
[INFO] [stderr] 15 |     } else {
[INFO] [stderr] 16 |         bytes.push(vals[0]);
[INFO] [stderr]  ...
[INFO] [stderr] 
[INFO] [stderr] warning: passing a unit value to a function
[INFO] [stderr]    --> src/segment.rs:240:40
[INFO] [stderr]     |
[INFO] [stderr] 240 |                         Ok(uuid) => Ok(segments.push(Segment::UUID(uuid))),
[INFO] [stderr]     |                                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unit_arg)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unit_arg
[INFO] [stderr] help: if you intended to pass a unit value, use a unit literal instead
[INFO] [stderr]     |
[INFO] [stderr] 240 |                         Ok(uuid) => Ok(()),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr] 
[INFO] [stderr] warning: the operation is ineffective. Consider reducing it to `8`
[INFO] [stderr]   --> src/constants.rs:22:11
[INFO] [stderr]    |
[INFO] [stderr] 22 |     (1 << (1 * 8)) - 1,
[INFO] [stderr]    |           ^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::identity_op)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `input`.
[INFO] [stderr]   --> src/utils.rs:35:14
[INFO] [stderr]    |
[INFO] [stderr] 35 |     for i in 0..input.len() {
[INFO] [stderr]    |              ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_range_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 35 |     for <item> in &input {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `bytes`.
[INFO] [stderr]   --> src/utils.rs:52:18
[INFO] [stderr]    |
[INFO] [stderr] 52 |         for i in 0..bytes.len() {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 52 |         for <item> in &mut bytes {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `bytes`.
[INFO] [stderr]   --> src/utils.rs:62:18
[INFO] [stderr]    |
[INFO] [stderr] 62 |         for i in 0..bytes.len() {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 62 |         for <item> in &mut bytes {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: you should consider deriving a `Default` implementation for `Tuple`
[INFO] [stderr]   --> src/lib.rs:21:5
[INFO] [stderr]    |
[INFO] [stderr] 21 | /     pub fn new() -> Tuple {
[INFO] [stderr] 22 | |         Tuple {
[INFO] [stderr] 23 | |             buffer: Vec::with_capacity(128)
[INFO] [stderr] 24 | |         }
[INFO] [stderr] 25 | |     }
[INFO] [stderr]    | |_____^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::new_without_default_derive)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default_derive
[INFO] [stderr] help: try this
[INFO] [stderr]    |
[INFO] [stderr] 15 | #[derive(Default)]
[INFO] [stderr]    |
[INFO] [stderr] 
[INFO] [stderr] warning: passing a unit value to a function
[INFO] [stderr]    --> src/segment.rs:240:40
[INFO] [stderr]     |
[INFO] [stderr] 240 |                         Ok(uuid) => Ok(segments.push(Segment::UUID(uuid))),
[INFO] [stderr]     |                                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unit_arg)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unit_arg
[INFO] [stderr] help: if you intended to pass a unit value, use a unit literal instead
[INFO] [stderr]     |
[INFO] [stderr] 240 |                         Ok(uuid) => Ok(()),
[INFO] [stderr]     |                                        ^^
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:542:29
[INFO] [stderr]     |
[INFO] [stderr] 542 |         let result = decode(&vec![STRING_CODE, 119, 111, 119, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[STRING_CODE, 119, 111, 119, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::useless_vec)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:549:29
[INFO] [stderr]     |
[INFO] [stderr] 549 |         let result = decode(&vec![STRING_CODE, 119, 111, 119, 0, 255, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[STRING_CODE, 119, 111, 119, 0, 255, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:556:29
[INFO] [stderr]     |
[INFO] [stderr] 556 |         let result = decode(&vec![STRING_CODE, 0, 255, 119, 0, 255, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[STRING_CODE, 0, 255, 119, 0, 255, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:563:29
[INFO] [stderr]     |
[INFO] [stderr] 563 |         let result = decode(&vec![BYTES_CODE, 1, 2, 3, 4, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[BYTES_CODE, 1, 2, 3, 4, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:570:29
[INFO] [stderr]     |
[INFO] [stderr] 570 |         let result = decode(&vec![BYTES_CODE, 1, 2, 0, 255, 3, 4, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[BYTES_CODE, 1, 2, 0, 255, 3, 4, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:577:29
[INFO] [stderr]     |
[INFO] [stderr] 577 |         let result = decode(&vec![INT_ZERO_CODE]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:584:29
[INFO] [stderr]     |
[INFO] [stderr] 584 |         let result = decode(&vec![FLOAT_CODE, 191, 128, 0, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[FLOAT_CODE, 191, 128, 0, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:591:29
[INFO] [stderr]     |
[INFO] [stderr] 591 |         let result = decode(&vec![FLOAT_CODE, 192, 0, 0, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[FLOAT_CODE, 192, 0, 0, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:598:29
[INFO] [stderr]     |
[INFO] [stderr] 598 |         let result = decode(&vec![FLOAT_CODE, 198, 245, 111, 7]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[FLOAT_CODE, 198, 245, 111, 7]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:605:29
[INFO] [stderr]     |
[INFO] [stderr] 605 |         let result = decode(&vec![DOUBLE_CODE, 191, 240, 0, 0, 0, 0, 0, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[DOUBLE_CODE, 191, 240, 0, 0, 0, 0, 0, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:612:29
[INFO] [stderr]     |
[INFO] [stderr] 612 |         let result = decode(&vec![DOUBLE_CODE, 192, 0, 0, 0, 0, 0, 0, 0]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[DOUBLE_CODE, 192, 0, 0, 0, 0, 0, 0, 0]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:619:29
[INFO] [stderr]     |
[INFO] [stderr] 619 |         let result = decode(&vec![DOUBLE_CODE, 192, 222, 173, 224, 229, 96, 65, 137]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[DOUBLE_CODE, 192, 222, 173, 224, 229, 96, 65, 137]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:626:29
[INFO] [stderr]     |
[INFO] [stderr] 626 |         let result = decode(&vec![INT_ZERO_CODE + 1, 1]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE + 1, 1]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:633:29
[INFO] [stderr]     |
[INFO] [stderr] 633 |         let result = decode(&vec![INT_ZERO_CODE + 2, 19, 136]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE + 2, 19, 136]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:640:29
[INFO] [stderr]     |
[INFO] [stderr] 640 |         let result = decode(&vec![INT_ZERO_CODE + 2, 1, 1]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE + 2, 1, 1]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:647:29
[INFO] [stderr]     |
[INFO] [stderr] 647 |         let result = decode(&vec![INT_ZERO_CODE - 1, 254]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE - 1, 254]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:654:29
[INFO] [stderr]     |
[INFO] [stderr] 654 |         let result = decode(&vec![INT_ZERO_CODE - 1, 1]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE - 1, 1]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:661:38
[INFO] [stderr]     |
[INFO] [stderr] 661 |         let result = Segment::decode(&vec![INT_ZERO_CODE - 1]).unwrap_err();
[INFO] [stderr]     |                                      ^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE - 1]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:668:38
[INFO] [stderr]     |
[INFO] [stderr] 668 |         let result = Segment::decode(&vec![INT_ZERO_CODE + 1]).unwrap_err();
[INFO] [stderr]     |                                      ^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE + 1]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:675:38
[INFO] [stderr]     |
[INFO] [stderr] 675 |         let result = Segment::decode(&vec![FLOAT_CODE]).unwrap_err();
[INFO] [stderr]     |                                      ^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[FLOAT_CODE]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:682:38
[INFO] [stderr]     |
[INFO] [stderr] 682 |         let result = Segment::decode(&vec![DOUBLE_CODE]).unwrap_err();
[INFO] [stderr]     |                                      ^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[DOUBLE_CODE]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:689:29
[INFO] [stderr]     |
[INFO] [stderr] 689 |         let result = decode(&vec![INT_ZERO_CODE + 8, 127, 255, 255, 255, 255, 255, 255, 255]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE + 8, 127, 255, 255, 255, 255, 255, 255, 255]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:696:29
[INFO] [stderr]     |
[INFO] [stderr] 696 |         let result = decode(&vec![INT_ZERO_CODE - 8, 127, 255, 255, 255, 255, 255, 255, 255]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE - 8, 127, 255, 255, 255, 255, 255, 255, 255]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:703:29
[INFO] [stderr]     |
[INFO] [stderr] 703 |         let result = decode(&vec![INT_ZERO_CODE - 2, 254, 255]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[INT_ZERO_CODE - 2, 254, 255]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:724:29
[INFO] [stderr]     |
[INFO] [stderr] 724 |         let result = decode(&vec![TRUE_CODE]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[TRUE_CODE]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:731:29
[INFO] [stderr]     |
[INFO] [stderr] 731 |         let result = decode(&vec![FALSE_CODE]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[FALSE_CODE]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:777:29
[INFO] [stderr]     |
[INFO] [stderr] 777 |         let result = decode(&vec![NESTED_CODE, STRING_CODE, 72, 101, 108, 108, 111, NULL, TRUE_CODE, NULL]);
[INFO] [stderr]     |                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[NESTED_CODE, STRING_CODE, 72, 101, 108, 108, 111, NULL, TRUE_CODE, NULL]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: useless use of `vec!`
[INFO] [stderr]    --> src/segment.rs:784:30
[INFO] [stderr]     |
[INFO] [stderr] 784 |         let builder = decode(&vec![NESTED_CODE, NESTED_CODE, TRUE_CODE, STRING_CODE, 72, 101, 108, 108, 111, NULL, NULL, INT_ZERO_CODE + 2, 19, 136, NULL]);
[INFO] [stderr]     |                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use a slice directly: `&[NESTED_CODE, NESTED_CODE, TRUE_CODE, STRING_CODE, 72, 101, 108, 108, 111, NULL, NULL, INT_ZERO_CODE + 2, 19, 136, NULL]`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
[INFO] [stderr] 
[INFO] [stderr] warning: the operation is ineffective. Consider reducing it to `8`
[INFO] [stderr]   --> src/constants.rs:22:11
[INFO] [stderr]    |
[INFO] [stderr] 22 |     (1 << (1 * 8)) - 1,
[INFO] [stderr]    |           ^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::identity_op)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `input`.
[INFO] [stderr]   --> src/utils.rs:35:14
[INFO] [stderr]    |
[INFO] [stderr] 35 |     for i in 0..input.len() {
[INFO] [stderr]    |              ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_range_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 35 |     for <item> in &input {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `bytes`.
[INFO] [stderr]   --> src/utils.rs:52:18
[INFO] [stderr]    |
[INFO] [stderr] 52 |         for i in 0..bytes.len() {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 52 |         for <item> in &mut bytes {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `bytes`.
[INFO] [stderr]   --> src/utils.rs:62:18
[INFO] [stderr]    |
[INFO] [stderr] 62 |         for i in 0..bytes.len() {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 62 |         for <item> in &mut bytes {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: you should consider deriving a `Default` implementation for `Tuple`
[INFO] [stderr]   --> src/lib.rs:21:5
[INFO] [stderr]    |
[INFO] [stderr] 21 | /     pub fn new() -> Tuple {
[INFO] [stderr] 22 | |         Tuple {
[INFO] [stderr] 23 | |             buffer: Vec::with_capacity(128)
[INFO] [stderr] 24 | |         }
[INFO] [stderr] 25 | |     }
[INFO] [stderr]    | |_____^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::new_without_default_derive)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default_derive
[INFO] [stderr] help: try this
[INFO] [stderr]    |
[INFO] [stderr] 15 | #[derive(Default)]
[INFO] [stderr]    |
[INFO] [stderr] 
[INFO] [stderr]     Finished dev [unoptimized + debuginfo] target(s) in 1.88s
[INFO] running `"docker" "inspect" "cadcce35feb5ca6bbeaffc3f7bc741fc7b09441a20fb6d32f410bd006dd511d9"`
[INFO] running `"docker" "rm" "-f" "cadcce35feb5ca6bbeaffc3f7bc741fc7b09441a20fb6d32f410bd006dd511d9"`
[INFO] [stdout] cadcce35feb5ca6bbeaffc3f7bc741fc7b09441a20fb6d32f410bd006dd511d9