[INFO] crate algojam 0.1.0 is already in cache
[INFO] extracting crate algojam 0.1.0 into work/ex/clippy-test-run/sources/stable/reg/algojam/0.1.0
[INFO] extracting crate algojam 0.1.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/algojam/0.1.0
[INFO] validating manifest of algojam-0.1.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of algojam-0.1.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing algojam-0.1.0
[INFO] finished frobbing algojam-0.1.0
[INFO] frobbed toml for algojam-0.1.0 written to work/ex/clippy-test-run/sources/stable/reg/algojam/0.1.0/Cargo.toml
[INFO] started frobbing algojam-0.1.0
[INFO] finished frobbing algojam-0.1.0
[INFO] frobbed toml for algojam-0.1.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/algojam/0.1.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting algojam-0.1.0 against stable+rustflags=-Dclippy::into_iter_on_array for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-3/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/algojam/0.1.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid -Dclippy::into_iter_on_array" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] a4108c3dbda66bff6a60b00f08501196ec0c75c98c318ec1c50c5e14b83c2217
[INFO] running `"docker" "start" "-a" "a4108c3dbda66bff6a60b00f08501196ec0c75c98c318ec1c50c5e14b83c2217"`
[INFO] [stderr]     Checking algojam v0.1.0 (/opt/crater/workdir)
[INFO] [stderr] warning: using `println!("")`
[INFO] [stderr]   --> src/code_j.rs:58:9
[INFO] [stderr]    |
[INFO] [stderr] 58 |         println!("");
[INFO] [stderr]    |         ^^^^^^^^^^^^ help: replace it with: `println!()`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::println_empty_string)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#println_empty_string
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2016.rs:25:50
[INFO] [stderr]    |
[INFO] [stderr] 25 |         println!("Case #{}: {}", current_case+1, "INSOMNIA");
[INFO] [stderr]    |                                                  ^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::print_literal)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2014.rs:50:42
[INFO] [stderr]    |
[INFO] [stderr] 50 |         println!("Case #{}: {}",case+1 , "Bad magician!");
[INFO] [stderr]    |                                          ^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2014.rs:53:42
[INFO] [stderr]    |
[INFO] [stderr] 53 |         println!("Case #{}: {}",case+1 , "Volunteer cheated!");
[INFO] [stderr]    |                                          ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: using `println!("")`
[INFO] [stderr]   --> src/code_j.rs:58:9
[INFO] [stderr]    |
[INFO] [stderr] 58 |         println!("");
[INFO] [stderr]    |         ^^^^^^^^^^^^ help: replace it with: `println!()`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::println_empty_string)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#println_empty_string
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2016.rs:25:50
[INFO] [stderr]    |
[INFO] [stderr] 25 |         println!("Case #{}: {}", current_case+1, "INSOMNIA");
[INFO] [stderr]    |                                                  ^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::print_literal)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2014.rs:50:42
[INFO] [stderr]    |
[INFO] [stderr] 50 |         println!("Case #{}: {}",case+1 , "Bad magician!");
[INFO] [stderr]    |                                          ^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: literal with an empty format string
[INFO] [stderr]   --> src/google/r_2014.rs:53:42
[INFO] [stderr]    |
[INFO] [stderr] 53 |         println!("Case #{}: {}",case+1 , "Volunteer cheated!");
[INFO] [stderr]    |                                          ^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#print_literal
[INFO] [stderr] 
[INFO] [stderr] warning: unused imports: `BufRead`, `BufReader`
[INFO] [stderr]  --> src/google/r_2013.rs:3:15
[INFO] [stderr]   |
[INFO] [stderr] 3 | use std::io::{BufRead, BufReader};
[INFO] [stderr]   |               ^^^^^^^  ^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(unused_imports)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: unused import: `std::fs::File`
[INFO] [stderr]  --> src/google/r_2013.rs:4:5
[INFO] [stderr]   |
[INFO] [stderr] 4 | use std::fs::File;
[INFO] [stderr]   |     ^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: unused imports: `BufRead`, `BufReader`
[INFO] [stderr]  --> src/google/r_2013.rs:3:15
[INFO] [stderr]   |
[INFO] [stderr] 3 | use std::io::{BufRead, BufReader};
[INFO] [stderr]   |               ^^^^^^^  ^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(unused_imports)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: unused import: `std::fs::File`
[INFO] [stderr]  --> src/google/r_2013.rs:4:5
[INFO] [stderr]   |
[INFO] [stderr] 4 | use std::fs::File;
[INFO] [stderr]   |     ^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `credits` is never read
[INFO] [stderr]   --> src/code_j.rs:32:13
[INFO] [stderr]    |
[INFO] [stderr] 32 |     let mut credits: i32 = 0;
[INFO] [stderr]    |             ^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_assignments)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `item` is never read
[INFO] [stderr]   --> src/code_j.rs:33:13
[INFO] [stderr]    |
[INFO] [stderr] 33 |     let mut item: i32 = 0;
[INFO] [stderr]    |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `flag` is never read
[INFO] [stderr]   --> src/code_j.rs:35:13
[INFO] [stderr]    |
[INFO] [stderr] 35 |     let mut flag: bool = false;
[INFO] [stderr]    |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: unused variable: `half`
[INFO] [stderr]   --> src/code_j.rs:44:13
[INFO] [stderr]    |
[INFO] [stderr] 44 |         let half = item /2;
[INFO] [stderr]    |             ^^^^ help: consider using `_half` instead
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_variables)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `backup` is never read
[INFO] [stderr]   --> src/google/r_2016.rs:23:13
[INFO] [stderr]    |
[INFO] [stderr] 23 |     let mut backup: i32 = current_number;
[INFO] [stderr]    |             ^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `credits` is never read
[INFO] [stderr]   --> src/code_j.rs:32:13
[INFO] [stderr]    |
[INFO] [stderr] 32 |     let mut credits: i32 = 0;
[INFO] [stderr]    |             ^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_assignments)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `item` is never read
[INFO] [stderr]   --> src/code_j.rs:33:13
[INFO] [stderr]    |
[INFO] [stderr] 33 |     let mut item: i32 = 0;
[INFO] [stderr]    |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `flag` is never read
[INFO] [stderr]   --> src/code_j.rs:35:13
[INFO] [stderr]    |
[INFO] [stderr] 35 |     let mut flag: bool = false;
[INFO] [stderr]    |             ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: unused variable: `half`
[INFO] [stderr]   --> src/code_j.rs:44:13
[INFO] [stderr]    |
[INFO] [stderr] 44 |         let half = item /2;
[INFO] [stderr]    |             ^^^^ help: consider using `_half` instead
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_variables)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: value assigned to `backup` is never read
[INFO] [stderr]   --> src/google/r_2016.rs:23:13
[INFO] [stderr]    |
[INFO] [stderr] 23 |     let mut backup: i32 = current_number;
[INFO] [stderr]    |             ^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: unused variable: `case`
[INFO] [stderr]   --> src/google/r_2013.rs:19:10
[INFO] [stderr]    |
[INFO] [stderr] 19 | fn logic(case: usize){
[INFO] [stderr]    |          ^^^^ help: consider using `_case` instead
[INFO] [stderr] 
[INFO] [stderr] warning: unused variable: `case`
[INFO] [stderr]   --> src/google/r_2013.rs:19:10
[INFO] [stderr]    |
[INFO] [stderr] 19 | fn logic(case: usize){
[INFO] [stderr]    |          ^^^^ help: consider using `_case` instead
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/code_j.rs:31:9
[INFO] [stderr]    |
[INFO] [stderr] 31 |     let mut t: i8 = read!();
[INFO] [stderr]    |         ----^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_mut)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/code_j.rs:31:9
[INFO] [stderr]    |
[INFO] [stderr] 31 |     let mut t: i8 = read!();
[INFO] [stderr]    |         ----^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(unused_mut)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/google/r_2016.rs:16:9
[INFO] [stderr]    |
[INFO] [stderr] 16 |     let mut sleep: Vec<i32> = vec![0, 1, 2, 3, 4, 5, 6, 7, 8, 9];
[INFO] [stderr]    |         ----^^^^^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/google/r_2016.rs:22:9
[INFO] [stderr]    |
[INFO] [stderr] 22 |     let mut current_number = number;
[INFO] [stderr]    |         ----^^^^^^^^^^^^^^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/google/r_2016.rs:16:9
[INFO] [stderr]    |
[INFO] [stderr] 16 |     let mut sleep: Vec<i32> = vec![0, 1, 2, 3, 4, 5, 6, 7, 8, 9];
[INFO] [stderr]    |         ----^^^^^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr] 
[INFO] [stderr] warning: variable does not need to be mutable
[INFO] [stderr]   --> src/google/r_2016.rs:22:9
[INFO] [stderr]    |
[INFO] [stderr] 22 |     let mut current_number = number;
[INFO] [stderr]    |         ----^^^^^^^^^^^^^^
[INFO] [stderr]    |         |
[INFO] [stderr]    |         help: remove this `mut`
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/code_j.rs:2:1
[INFO] [stderr]   |
[INFO] [stderr] 2 | pub fn run(){
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(dead_code)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `prob`
[INFO] [stderr]   --> src/code_j.rs:30:1
[INFO] [stderr]    |
[INFO] [stderr] 30 | fn prob(){
[INFO] [stderr]    | ^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2009.rs:1:1
[INFO] [stderr]   |
[INFO] [stderr] 1 | pub fn run() {
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `alien_language`
[INFO] [stderr]  --> src/google/r_2009.rs:7:1
[INFO] [stderr]   |
[INFO] [stderr] 7 | fn alien_language() {
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2009.rs:18:1
[INFO] [stderr]    |
[INFO] [stderr] 18 | fn logic(l: i32, d: i32, test_case: i32) {
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2016.rs:1:1
[INFO] [stderr]   |
[INFO] [stderr] 1 | pub fn run() {
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `counting_sheep`
[INFO] [stderr]  --> src/google/r_2016.rs:7:1
[INFO] [stderr]   |
[INFO] [stderr] 7 | fn counting_sheep() {
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2016.rs:15:1
[INFO] [stderr]    |
[INFO] [stderr] 15 | fn logic(current_case: usize) {
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2014.rs:3:1
[INFO] [stderr]   |
[INFO] [stderr] 3 | pub fn run(){
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `magic_trick`
[INFO] [stderr]  --> src/google/r_2014.rs:9:1
[INFO] [stderr]   |
[INFO] [stderr] 9 | fn magic_trick(){
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2014.rs:16:1
[INFO] [stderr]    |
[INFO] [stderr] 16 | fn logic(case: usize){
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check`
[INFO] [stderr]   --> src/google/r_2014.rs:57:1
[INFO] [stderr]    |
[INFO] [stderr] 57 | fn check(num: i32,arr: [i32; 4] ) -> bool{
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check_col`
[INFO] [stderr]   --> src/google/r_2013.rs:68:1
[INFO] [stderr]    |
[INFO] [stderr] 68 | fn check_col(){
[INFO] [stderr]    | ^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check_diagonal`
[INFO] [stderr]   --> src/google/r_2013.rs:72:1
[INFO] [stderr]    |
[INFO] [stderr] 72 | fn check_diagonal(){
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/code_j.rs:2:1
[INFO] [stderr]   |
[INFO] [stderr] 2 | pub fn run(){
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr]   |
[INFO] [stderr]   = note: #[warn(dead_code)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `prob`
[INFO] [stderr]   --> src/code_j.rs:30:1
[INFO] [stderr]    |
[INFO] [stderr] 30 | fn prob(){
[INFO] [stderr]    | ^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2009.rs:1:1
[INFO] [stderr]   |
[INFO] [stderr] 1 | pub fn run() {
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `alien_language`
[INFO] [stderr]  --> src/google/r_2009.rs:7:1
[INFO] [stderr]   |
[INFO] [stderr] 7 | fn alien_language() {
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2009.rs:18:1
[INFO] [stderr]    |
[INFO] [stderr] 18 | fn logic(l: i32, d: i32, test_case: i32) {
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2016.rs:1:1
[INFO] [stderr]   |
[INFO] [stderr] 1 | pub fn run() {
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `counting_sheep`
[INFO] [stderr]  --> src/google/r_2016.rs:7:1
[INFO] [stderr]   |
[INFO] [stderr] 7 | fn counting_sheep() {
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2016.rs:15:1
[INFO] [stderr]    |
[INFO] [stderr] 15 | fn logic(current_case: usize) {
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `run`
[INFO] [stderr]  --> src/google/r_2014.rs:3:1
[INFO] [stderr]   |
[INFO] [stderr] 3 | pub fn run(){
[INFO] [stderr]   | ^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `magic_trick`
[INFO] [stderr]  --> src/google/r_2014.rs:9:1
[INFO] [stderr]   |
[INFO] [stderr] 9 | fn magic_trick(){
[INFO] [stderr]   | ^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `logic`
[INFO] [stderr]   --> src/google/r_2014.rs:16:1
[INFO] [stderr]    |
[INFO] [stderr] 16 | fn logic(case: usize){
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check`
[INFO] [stderr]   --> src/google/r_2014.rs:57:1
[INFO] [stderr]    |
[INFO] [stderr] 57 | fn check(num: i32,arr: [i32; 4] ) -> bool{
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check_col`
[INFO] [stderr]   --> src/google/r_2013.rs:68:1
[INFO] [stderr]    |
[INFO] [stderr] 68 | fn check_col(){
[INFO] [stderr]    | ^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: function is never used: `check_diagonal`
[INFO] [stderr]   --> src/google/r_2013.rs:72:1
[INFO] [stderr]    |
[INFO] [stderr] 72 | fn check_diagonal(){
[INFO] [stderr]    | ^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `array`.
[INFO] [stderr]   --> src/code_j.rs:41:18
[INFO] [stderr]    |
[INFO] [stderr] 41 |         for i in 0..item as usize {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_range_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 41 |         for <item> in array.iter_mut().take(item as usize) {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `array`.
[INFO] [stderr]   --> src/code_j.rs:41:18
[INFO] [stderr]    |
[INFO] [stderr] 41 |         for i in 0..item as usize {
[INFO] [stderr]    |                  ^^^^^^^^^^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::needless_range_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 41 |         for <item> in array.iter_mut().take(item as usize) {
[INFO] [stderr]    |             ^^^^^^    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2016.rs:42:17
[INFO] [stderr]    |
[INFO] [stderr] 42 |                 number = number / 10;
[INFO] [stderr]    |                 ^^^^^^^^^^^^^^^^^^^^ help: replace it with: `number /= 10`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::assign_op_pattern)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2016.rs:44:13
[INFO] [stderr]    |
[INFO] [stderr] 44 |             count = count + 1;
[INFO] [stderr]    |             ^^^^^^^^^^^^^^^^^ help: replace it with: `count += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2016.rs:42:17
[INFO] [stderr]    |
[INFO] [stderr] 42 |                 number = number / 10;
[INFO] [stderr]    |                 ^^^^^^^^^^^^^^^^^^^^ help: replace it with: `number /= 10`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::assign_op_pattern)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2016.rs:44:13
[INFO] [stderr]    |
[INFO] [stderr] 44 |             count = count + 1;
[INFO] [stderr]    |             ^^^^^^^^^^^^^^^^^ help: replace it with: `count += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `first_arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:22:14
[INFO] [stderr]    |
[INFO] [stderr] 22 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 22 |     for <item> in &mut first_arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `first_arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:22:14
[INFO] [stderr]    |
[INFO] [stderr] 22 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 22 |     for <item> in &mut first_arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `second_arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:30:14
[INFO] [stderr]    |
[INFO] [stderr] 30 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 30 |     for <item> in &mut second_arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is used to index `new_array`
[INFO] [stderr]   --> src/google/r_2014.rs:36:14
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for (i, <item>) in new_array.iter_mut().enumerate() {
[INFO] [stderr]    |         ^^^^^^^^^^^    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: it looks like you're manually copying between slices
[INFO] [stderr]   --> src/google/r_2014.rs:36:14
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^ help: try replacing the loop by: `new_array[..4].clone_from_slice(&second_arr[ans_second-1][..4])`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::manual_memcpy)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_memcpy
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `second_arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:30:14
[INFO] [stderr]    |
[INFO] [stderr] 30 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 30 |     for <item> in &mut second_arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2014.rs:42:17
[INFO] [stderr]    |
[INFO] [stderr] 42 |                 count = count + 1;
[INFO] [stderr]    |                 ^^^^^^^^^^^^^^^^^ help: replace it with: `count += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:58:14
[INFO] [stderr]    |
[INFO] [stderr] 58 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 58 |     for <item> in &arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is used to index `new_array`
[INFO] [stderr]   --> src/google/r_2014.rs:36:14
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for (i, <item>) in new_array.iter_mut().enumerate() {
[INFO] [stderr]    |         ^^^^^^^^^^^    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: it looks like you're manually copying between slices
[INFO] [stderr]   --> src/google/r_2014.rs:36:14
[INFO] [stderr]    |
[INFO] [stderr] 36 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^ help: try replacing the loop by: `new_array[..4].clone_from_slice(&second_arr[ans_second-1][..4])`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::manual_memcpy)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_memcpy
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2014.rs:42:17
[INFO] [stderr]    |
[INFO] [stderr] 42 |                 count = count + 1;
[INFO] [stderr]    |                 ^^^^^^^^^^^^^^^^^ help: replace it with: `count += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: the loop variable `i` is only used to index `arr`.
[INFO] [stderr]   --> src/google/r_2014.rs:58:14
[INFO] [stderr]    |
[INFO] [stderr] 58 |     for i in 0..4 {
[INFO] [stderr]    |              ^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
[INFO] [stderr] help: consider using an iterator
[INFO] [stderr]    |
[INFO] [stderr] 58 |     for <item> in &arr {
[INFO] [stderr]    |         ^^^^^^    ^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:34:13
[INFO] [stderr]    |
[INFO] [stderr] 34 |             g = g + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `g += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] error: this loop never actually loops
[INFO] [stderr]   --> src/google/r_2013.rs:39:5
[INFO] [stderr]    |
[INFO] [stderr] 39 | /     for i in 0..4 {
[INFO] [stderr] 40 | | 
[INFO] [stderr] 41 | |             print!(" {} ", check_row(input, i));
[INFO] [stderr] 42 | |             break;
[INFO] [stderr] 43 | | 
[INFO] [stderr] 44 | | 
[INFO] [stderr] 45 | |     }
[INFO] [stderr]    | |_____^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[deny(clippy::never_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#never_loop
[INFO] [stderr] 
[INFO] [stderr] warning: variable `X` should have a snake case name such as `x`
[INFO] [stderr]   --> src/google/r_2013.rs:49:9
[INFO] [stderr]    |
[INFO] [stderr] 49 |     let mut X: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(non_snake_case)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: variable `T` should have a snake case name such as `t`
[INFO] [stderr]   --> src/google/r_2013.rs:50:9
[INFO] [stderr]    |
[INFO] [stderr] 50 |     let mut T: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: variable `O` should have a snake case name such as `o`
[INFO] [stderr]   --> src/google/r_2013.rs:51:9
[INFO] [stderr]    |
[INFO] [stderr] 51 |     let mut O: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:54:13
[INFO] [stderr]    |
[INFO] [stderr] 54 |             X = X + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `X += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:56:13
[INFO] [stderr]    |
[INFO] [stderr] 56 |             T = T + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `T += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:58:13
[INFO] [stderr]    |
[INFO] [stderr] 58 |             O = O + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `O += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to previous error
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:34:13
[INFO] [stderr]    |
[INFO] [stderr] 34 |             g = g + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `g += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] error: this loop never actually loops
[INFO] [stderr]   --> src/google/r_2013.rs:39:5
[INFO] [stderr]    |
[INFO] [stderr] 39 | /     for i in 0..4 {
[INFO] [stderr] 40 | | 
[INFO] [stderr] 41 | |             print!(" {} ", check_row(input, i));
[INFO] [stderr] 42 | |             break;
[INFO] [stderr] 43 | | 
[INFO] [stderr] 44 | | 
[INFO] [stderr] 45 | |     }
[INFO] [stderr]    | |_____^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[deny(clippy::never_loop)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#never_loop
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `algojam`.
[INFO] [stderr] warning: build failed, waiting for other jobs to finish...
[INFO] [stderr] warning: variable `X` should have a snake case name such as `x`
[INFO] [stderr]   --> src/google/r_2013.rs:49:9
[INFO] [stderr]    |
[INFO] [stderr] 49 |     let mut X: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(non_snake_case)] on by default
[INFO] [stderr] 
[INFO] [stderr] warning: variable `T` should have a snake case name such as `t`
[INFO] [stderr]   --> src/google/r_2013.rs:50:9
[INFO] [stderr]    |
[INFO] [stderr] 50 |     let mut T: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: variable `O` should have a snake case name such as `o`
[INFO] [stderr]   --> src/google/r_2013.rs:51:9
[INFO] [stderr]    |
[INFO] [stderr] 51 |     let mut O: usize = 0;
[INFO] [stderr]    |         ^^^^^
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:54:13
[INFO] [stderr]    |
[INFO] [stderr] 54 |             X = X + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `X += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:56:13
[INFO] [stderr]    |
[INFO] [stderr] 56 |             T = T + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `T += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] warning: manual implementation of an assign operation
[INFO] [stderr]   --> src/google/r_2013.rs:58:13
[INFO] [stderr]    |
[INFO] [stderr] 58 |             O = O + 1;
[INFO] [stderr]    |             ^^^^^^^^^ help: replace it with: `O += 1`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assign_op_pattern
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to previous error
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `algojam`.
[INFO] [stderr] 
[INFO] [stderr] To learn more, run the command again with --verbose.
[INFO] running `"docker" "inspect" "a4108c3dbda66bff6a60b00f08501196ec0c75c98c318ec1c50c5e14b83c2217"`
[INFO] running `"docker" "rm" "-f" "a4108c3dbda66bff6a60b00f08501196ec0c75c98c318ec1c50c5e14b83c2217"`
[INFO] [stdout] a4108c3dbda66bff6a60b00f08501196ec0c75c98c318ec1c50c5e14b83c2217