[INFO] crate adts-reader 0.1.0 is already in cache
[INFO] extracting crate adts-reader 0.1.0 into work/ex/clippy-test-run/sources/stable/reg/adts-reader/0.1.0
[INFO] extracting crate adts-reader 0.1.0 into work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/adts-reader/0.1.0
[INFO] validating manifest of adts-reader-0.1.0 on toolchain stable
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] validating manifest of adts-reader-0.1.0 on toolchain stable+rustflags=-Dclippy::into_iter_on_array
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "read-manifest" "--manifest-path" "Cargo.toml"`
[INFO] started frobbing adts-reader-0.1.0
[INFO] finished frobbing adts-reader-0.1.0
[INFO] frobbed toml for adts-reader-0.1.0 written to work/ex/clippy-test-run/sources/stable/reg/adts-reader/0.1.0/Cargo.toml
[INFO] started frobbing adts-reader-0.1.0
[INFO] finished frobbing adts-reader-0.1.0
[INFO] frobbed toml for adts-reader-0.1.0 written to work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/adts-reader/0.1.0/Cargo.toml
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "generate-lockfile" "--manifest-path" "Cargo.toml" "-Zno-index-update"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] running `"/mnt/big/crater/work/local/cargo-home/bin/cargo" "+stable" "fetch" "--locked" "--manifest-path" "Cargo.toml"`
[INFO] linting adts-reader-0.1.0 against stable+rustflags=-Dclippy::into_iter_on_array for clippy-test-run
[INFO] running `"docker" "create" "-v" "/mnt/big/crater/work/local/target-dirs/clippy-test-run/worker-7/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array:/opt/crater/target:rw,Z" "-v" "/mnt/big/crater/work/ex/clippy-test-run/sources/stable+rustflags=-Dclippy%3A%3Ainto_iter_on_array/reg/adts-reader/0.1.0:/opt/crater/workdir:ro,Z" "-v" "/mnt/big/crater/work/local/cargo-home:/opt/crater/cargo-home:ro,Z" "-v" "/mnt/big/crater/work/local/rustup-home:/opt/crater/rustup-home:ro,Z" "-e" "USER_ID=1000" "-e" "SOURCE_DIR=/opt/crater/workdir" "-e" "MAP_USER_ID=1000" "-e" "CARGO_TARGET_DIR=/opt/crater/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid -Dclippy::into_iter_on_array" "-e" "CARGO_HOME=/opt/crater/cargo-home" "-e" "RUSTUP_HOME=/opt/crater/rustup-home" "-w" "/opt/crater/workdir" "-m" "1536M" "--network" "none" "rustops/crates-build-env" "/opt/crater/cargo-home/bin/cargo" "+stable" "clippy" "--frozen" "--all" "--all-targets"`
[INFO] [stdout] 506ecbd450a22666362e5acf64b4a908f5a030e2b0c48621f9f7ba037ae4564e
[INFO] running `"docker" "start" "-a" "506ecbd450a22666362e5acf64b4a908f5a030e2b0c48621f9f7ba037ae4564e"`
[INFO] [stderr]     Checking bitstream-io v0.6.5
[INFO] [stderr]     Checking adts-reader v0.1.0 (/opt/crater/workdir)
[INFO] [stderr]     Checking arrayvec v0.3.25
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/lib.rs:305:33
[INFO] [stderr]     |
[INFO] [stderr] 305 |         u16::from(self.buf[5] & 0b00000011) << 6 |
[INFO] [stderr]     |                                 ^^^^^^^^^^ help: consider: `0b0000_0011`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unreadable_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: you don't need to add `&` to all patterns
[INFO] [stderr]    --> src/lib.rs:110:9
[INFO] [stderr]     |
[INFO] [stderr] 110 | /         match self {
[INFO] [stderr] 111 | |             &SamplingFrequency::Freq96000 => Some(96000),
[INFO] [stderr] 112 | |             &SamplingFrequency::Freq88200 => Some(88200),
[INFO] [stderr] 113 | |             &SamplingFrequency::Freq64000 => Some(64000),
[INFO] [stderr] ...   |
[INFO] [stderr] 126 | |             &SamplingFrequency::FreqReserved0xf => None,
[INFO] [stderr] 127 | |         }
[INFO] [stderr]     | |_________^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::match_ref_pats)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#match_ref_pats
[INFO] [stderr] help: instead of prefixing all patterns with `&`, you can dereference the expression
[INFO] [stderr]     |
[INFO] [stderr] 110 |         match *self {
[INFO] [stderr] 111 |             SamplingFrequency::Freq96000 => Some(96000),
[INFO] [stderr] 112 |             SamplingFrequency::Freq88200 => Some(88200),
[INFO] [stderr] 113 |             SamplingFrequency::Freq64000 => Some(64000),
[INFO] [stderr] 114 |             SamplingFrequency::Freq48000 => Some(48000),
[INFO] [stderr] 115 |             SamplingFrequency::Freq44100 => Some(44100),
[INFO] [stderr]   ...
[INFO] [stderr] 
[INFO] [stderr]     Checking hexdump v0.1.0
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/lib.rs:305:33
[INFO] [stderr]     |
[INFO] [stderr] 305 |         u16::from(self.buf[5] & 0b00000011) << 6 |
[INFO] [stderr]     |                                 ^^^^^^^^^^ help: consider: `0b0000_0011`
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::unreadable_literal)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/lib.rs:370:24
[INFO] [stderr]     |
[INFO] [stderr] 370 |             w.write(8, 0b10000001)  // 1 byte of payload data
[INFO] [stderr]     |                        ^^^^^^^^^^ help: consider: `0b1000_0001`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] warning: long literal lacking separators
[INFO] [stderr]    --> src/lib.rs:387:43
[INFO] [stderr]     |
[INFO] [stderr] 387 |         assert_eq!(header.payload(), Ok(&[0b10000001][..]));
[INFO] [stderr]     |                                           ^^^^^^^^^^ help: consider: `0b1000_0001`
[INFO] [stderr]     |
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unreadable_literal
[INFO] [stderr] 
[INFO] [stderr] error: Variable in the condition are not mutated in the loop body. This either leads to an infinite or to a never running loop.
[INFO] [stderr]   --> examples/dump.rs:51:11
[INFO] [stderr]    |
[INFO] [stderr] 51 |     while reading {
[INFO] [stderr]    |           ^^^^^^^
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[deny(clippy::while_immutable_condition)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_immutable_condition
[INFO] [stderr] 
[INFO] [stderr] warning: use of `expect` followed by a function call
[INFO] [stderr]   --> examples/dump.rs:68:31
[INFO] [stderr]    |
[INFO] [stderr] 68 |     let f = File::open(&name).expect(&format!("file not found: {}", &name));
[INFO] [stderr]    |                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| panic!("file not found: {}", &name))`
[INFO] [stderr]    |
[INFO] [stderr]    = note: #[warn(clippy::expect_fun_call)] on by default
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#expect_fun_call
[INFO] [stderr] 
[INFO] [stderr] warning: use of `expect` followed by a function call
[INFO] [stderr]   --> examples/dump.rs:69:12
[INFO] [stderr]    |
[INFO] [stderr] 69 |     run(f).expect(&format!("error reading {}", &name));
[INFO] [stderr]    |            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|_| panic!("error reading {}", &name))`
[INFO] [stderr]    |
[INFO] [stderr]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#expect_fun_call
[INFO] [stderr] 
[INFO] [stderr] error: aborting due to previous error
[INFO] [stderr] 
[INFO] [stderr] error: Could not compile `adts-reader`.
[INFO] [stderr] warning: build failed, waiting for other jobs to finish...
[INFO] [stderr] warning: you don't need to add `&` to all patterns
[INFO] [stderr]    --> src/lib.rs:110:9
[INFO] [stderr]     |
[INFO] [stderr] 110 | /         match self {
[INFO] [stderr] 111 | |             &SamplingFrequency::Freq96000 => Some(96000),
[INFO] [stderr] 112 | |             &SamplingFrequency::Freq88200 => Some(88200),
[INFO] [stderr] 113 | |             &SamplingFrequency::Freq64000 => Some(64000),
[INFO] [stderr] ...   |
[INFO] [stderr] 126 | |             &SamplingFrequency::FreqReserved0xf => None,
[INFO] [stderr] 127 | |         }
[INFO] [stderr]     | |_________^
[INFO] [stderr]     |
[INFO] [stderr]     = note: #[warn(clippy::match_ref_pats)] on by default
[INFO] [stderr]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#match_ref_pats
[INFO] [stderr] help: instead of prefixing all patterns with `&`, you can dereference the expression
[INFO] [stderr]     |
[INFO] [stderr] 110 |         match *self {
[INFO] [stderr] 111 |             SamplingFrequency::Freq96000 => Some(96000),
[INFO] [stderr] 112 |             SamplingFrequency::Freq88200 => Some(88200),
[INFO] [stderr] 113 |             SamplingFrequency::Freq64000 => Some(64000),
[INFO] [stderr] 114 |             SamplingFrequency::Freq48000 => Some(48000),
[INFO] [stderr] 115 |             SamplingFrequency::Freq44100 => Some(44100),
[INFO] [stderr]   ...
[INFO] [stderr] 
[INFO] [stderr] error: build failed
[INFO] running `"docker" "inspect" "506ecbd450a22666362e5acf64b4a908f5a030e2b0c48621f9f7ba037ae4564e"`
[INFO] running `"docker" "rm" "-f" "506ecbd450a22666362e5acf64b4a908f5a030e2b0c48621f9f7ba037ae4564e"`
[INFO] [stdout] 506ecbd450a22666362e5acf64b4a908f5a030e2b0c48621f9f7ba037ae4564e