[INFO] cloning repository https://github.com/samollari/advent-of-code-2025
[INFO] running `Command { std: "git" "-c" "credential.helper=" "-c" "credential.helper=/workspace/cargo-home/bin/git-credential-null" "clone" "--bare" "https://github.com/samollari/advent-of-code-2025" "/workspace/cache/git-repos/https%3A%2F%2Fgithub.com%2Fsamollari%2Fadvent-of-code-2025", kill_on_drop: false }`
[INFO] [stderr] Cloning into bare repository '/workspace/cache/git-repos/https%3A%2F%2Fgithub.com%2Fsamollari%2Fadvent-of-code-2025'...
[INFO] running `Command { std: "git" "rev-parse" "HEAD", kill_on_drop: false }`
[INFO] [stdout] 0cd25c2e9e1a71f0bb5bac611ed50280898e912c
[INFO] linting samollari/advent-of-code-2025 against nightly for clippy-nonminimal_bool-denied
[INFO] running `Command { std: "git" "clone" "/workspace/cache/git-repos/https%3A%2F%2Fgithub.com%2Fsamollari%2Fadvent-of-code-2025" "/workspace/builds/worker-4-tc1/source", kill_on_drop: false }`
[INFO] [stderr] Cloning into '/workspace/builds/worker-4-tc1/source'...
[INFO] [stderr] done.
[INFO] removed /workspace/builds/worker-4-tc1/source/.cargo/config.toml
[INFO] started tweaking git repo https://github.com/samollari/advent-of-code-2025
[INFO] finished tweaking git repo https://github.com/samollari/advent-of-code-2025
[INFO] tweaked toml for git repo https://github.com/samollari/advent-of-code-2025 written to /workspace/builds/worker-4-tc1/source/Cargo.toml
[INFO] validating manifest of git repo https://github.com/samollari/advent-of-code-2025 on toolchain nightly
[INFO] running `Command { std: CARGO_HOME="/workspace/cargo-home" RUSTUP_HOME="/workspace/rustup-home" "/workspace/cargo-home/bin/cargo" "+nightly" "metadata" "--manifest-path" "Cargo.toml" "--no-deps", kill_on_drop: false }`
[INFO] crate git repo https://github.com/samollari/advent-of-code-2025 already has a lockfile, it will not be regenerated
[INFO] running `Command { std: CARGO_HOME="/workspace/cargo-home" RUSTUP_HOME="/workspace/rustup-home" "/workspace/cargo-home/bin/cargo" "+nightly" "fetch" "--manifest-path" "Cargo.toml", kill_on_drop: false }`
[INFO] [stderr]     Updating crates.io index
[INFO] [stderr]  Downloading crates ...
[INFO] [stderr]   Downloaded thousands v0.2.0
[INFO] [stderr]   Downloaded dhat v0.3.3
[INFO] [stderr]   Downloaded mintex v0.1.2
[INFO] [stderr]   Downloaded tinyjson v2.5.1
[INFO] running `Command { std: "docker" "create" "-v" "/var/lib/crater-agent-workspace/builds/worker-4-tc1/target:/opt/rustwide/target:rw,Z" "-v" "/var/lib/crater-agent-workspace/builds/worker-4-tc1/source:/opt/rustwide/workdir:ro,Z" "-v" "/var/lib/crater-agent-workspace/cargo-home:/opt/rustwide/cargo-home:ro,Z" "-v" "/var/lib/crater-agent-workspace/rustup-home:/opt/rustwide/rustup-home:ro,Z" "-e" "SOURCE_DIR=/opt/rustwide/workdir" "-e" "CARGO_TARGET_DIR=/opt/rustwide/target" "-e" "CARGO_HOME=/opt/rustwide/cargo-home" "-e" "RUSTUP_HOME=/opt/rustwide/rustup-home" "-w" "/opt/rustwide/workdir" "-m" "1610612736" "--user" "0:0" "--network" "none" "ghcr.io/rust-lang/crates-build-env/linux@sha256:d429b63d4308055ea97f60fb1d3dfca48854a00942f1bd2ad806beaf015945ec" "/opt/rustwide/cargo-home/bin/cargo" "+nightly" "metadata" "--no-deps" "--format-version=1", kill_on_drop: false }`
[INFO] [stdout] e2e566312e8eb0463876ddb3852ff990e073a6201fcf0abb7c9a13b5603ba51c
[INFO] running `Command { std: "docker" "start" "-a" "e2e566312e8eb0463876ddb3852ff990e073a6201fcf0abb7c9a13b5603ba51c", kill_on_drop: false }`
[INFO] running `Command { std: "docker" "inspect" "e2e566312e8eb0463876ddb3852ff990e073a6201fcf0abb7c9a13b5603ba51c", kill_on_drop: false }`
[INFO] running `Command { std: "docker" "rm" "-f" "e2e566312e8eb0463876ddb3852ff990e073a6201fcf0abb7c9a13b5603ba51c", kill_on_drop: false }`
[INFO] [stdout] e2e566312e8eb0463876ddb3852ff990e073a6201fcf0abb7c9a13b5603ba51c
[INFO] running `Command { std: "docker" "create" "-v" "/var/lib/crater-agent-workspace/builds/worker-4-tc1/target:/opt/rustwide/target:rw,Z" "-v" "/var/lib/crater-agent-workspace/builds/worker-4-tc1/source:/opt/rustwide/workdir:ro,Z" "-v" "/var/lib/crater-agent-workspace/cargo-home:/opt/rustwide/cargo-home:ro,Z" "-v" "/var/lib/crater-agent-workspace/rustup-home:/opt/rustwide/rustup-home:ro,Z" "-e" "SOURCE_DIR=/opt/rustwide/workdir" "-e" "CARGO_TARGET_DIR=/opt/rustwide/target" "-e" "CARGO_INCREMENTAL=0" "-e" "RUST_BACKTRACE=full" "-e" "RUSTFLAGS=--cap-lints=forbid" "-e" "RUSTDOCFLAGS=--cap-lints=forbid" "-e" "CARGO_HOME=/opt/rustwide/cargo-home" "-e" "RUSTUP_HOME=/opt/rustwide/rustup-home" "-w" "/opt/rustwide/workdir" "-m" "1610612736" "--user" "0:0" "--network" "none" "ghcr.io/rust-lang/crates-build-env/linux@sha256:d429b63d4308055ea97f60fb1d3dfca48854a00942f1bd2ad806beaf015945ec" "/opt/rustwide/cargo-home/bin/cargo" "+nightly" "clippy" "--frozen" "--all" "--all-targets" "--message-format=json", kill_on_drop: false }`
[INFO] [stdout] 74a2a7b26f3ec1b6f4429430dfc84bfda4c4a9f1d8754edb8c7646d3b267e917
[INFO] running `Command { std: "docker" "start" "-a" "74a2a7b26f3ec1b6f4429430dfc84bfda4c4a9f1d8754edb8c7646d3b267e917", kill_on_drop: false }`
[INFO] [stderr]     Checking itertools v0.14.0
[INFO] [stderr]     Checking tinyjson v2.5.1
[INFO] [stderr]     Checking pico-args v0.5.0
[INFO] [stderr]     Checking advent_of_code v0.12.0 (/opt/rustwide/workdir)
[INFO] [stdout] warning: consider using `sort_unstable_by_key`
[INFO] [stdout]   --> src/template/timings.rs:54:9
[INFO] [stdout]    |
[INFO] [stdout] 54 |         data.sort_unstable_by(|a, b| a.day.cmp(&b.day));
[INFO] [stdout]    |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_sort_by
[INFO] [stdout]    = note: `#[warn(clippy::unnecessary_sort_by)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 54 -         data.sort_unstable_by(|a, b| a.day.cmp(&b.day));
[INFO] [stdout] 54 +         data.sort_unstable_by_key(|a| a.day);
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: consider using `sort_unstable_by_key`
[INFO] [stdout]   --> src/template/timings.rs:54:9
[INFO] [stdout]    |
[INFO] [stdout] 54 |         data.sort_unstable_by(|a, b| a.day.cmp(&b.day));
[INFO] [stdout]    |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_sort_by
[INFO] [stdout]    = note: `#[warn(clippy::unnecessary_sort_by)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 54 -         data.sort_unstable_by(|a, b| a.day.cmp(&b.day));
[INFO] [stdout] 54 +         data.sort_unstable_by_key(|a| a.day);
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:115:18
[INFO] [stdout]     |
[INFO] [stdout] 115 |     fn get_range(self: &Self) -> RangeInclusive<usize> {
[INFO] [stdout]     |                  ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout]     = note: `#[warn(clippy::needless_arbitrary_self_type)]` on by default
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 115 -     fn get_range(self: &Self) -> RangeInclusive<usize> {
[INFO] [stdout] 115 +     fn get_range(&self) -> RangeInclusive<usize> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:124:27
[INFO] [stdout]     |
[INFO] [stdout] 124 |     fn get_interior_range(self: &Self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout]     |                           ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 124 -     fn get_interior_range(self: &Self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout] 124 +     fn get_interior_range(&self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:136:25
[INFO] [stdout]     |
[INFO] [stdout] 136 |     fn perpendicular_to(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                         ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 136 -     fn perpendicular_to(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 136 +     fn perpendicular_to(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:146:21
[INFO] [stdout]     |
[INFO] [stdout] 146 |     fn _inline_with(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                     ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 146 -     fn _inline_with(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 146 +     fn _inline_with(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:150:19
[INFO] [stdout]     |
[INFO] [stdout] 150 |     fn intersects(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                   ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 150 -     fn intersects(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 150 +     fn intersects(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:160:18
[INFO] [stdout]     |
[INFO] [stdout] 160 |     fn _overlaps(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                  ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 160 -     fn _overlaps(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 160 +     fn _overlaps(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:170:23
[INFO] [stdout]     |
[INFO] [stdout] 170 |     fn _get_repr_at_y(self: &Self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout]     |                       ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 170 -     fn _get_repr_at_y(self: &Self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout] 170 +     fn _get_repr_at_y(&self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:212:31
[INFO] [stdout]     |
[INFO] [stdout] 212 |     fn iter_coords_except_end(self: &Self) -> impl Iterator<Item = Coord> {
[INFO] [stdout]     |                               ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 212 -     fn iter_coords_except_end(self: &Self) -> impl Iterator<Item = Coord> {
[INFO] [stdout] 212 +     fn iter_coords_except_end(&self) -> impl Iterator<Item = Coord> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]   --> src/bin/10.rs:58:38
[INFO] [stdout]    |
[INFO] [stdout] 58 |     fn find_min_presses_to_configure(self: &Self) -> Option<u64> {
[INFO] [stdout]    |                                      ^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout]    = note: `#[warn(clippy::needless_arbitrary_self_type)]` on by default
[INFO] [stdout] help: remove the type
[INFO] [stdout]    |
[INFO] [stdout] 58 -     fn find_min_presses_to_configure(self: &Self) -> Option<u64> {
[INFO] [stdout] 58 +     fn find_min_presses_to_configure(&self) -> Option<u64> {
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]   --> src/bin/03.rs:28:9
[INFO] [stdout]    |
[INFO] [stdout] 28 | /         match found {
[INFO] [stdout] 29 | |             Some((drop_index, _)) => {
[INFO] [stdout] 30 | |                 digits.remove(drop_index);
[INFO] [stdout] 31 | |                 digits.push(*digit);
[INFO] [stdout] 32 | |             }
[INFO] [stdout] 33 | |             None => {}
[INFO] [stdout] 34 | |         }
[INFO] [stdout]    | |_________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]    = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 28 ~         if let Some((drop_index, _)) = found {
[INFO] [stdout] 29 +             digits.remove(drop_index);
[INFO] [stdout] 30 +             digits.push(*digit);
[INFO] [stdout] 31 +         }
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]   --> src/bin/10.rs:65:31
[INFO] [stdout]    |
[INFO] [stdout] 65 |     fn buttons_satisfy_lights(self: &Self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout]    |                               ^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]    |
[INFO] [stdout] 65 -     fn buttons_satisfy_lights(self: &Self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout] 65 +     fn buttons_satisfy_lights(&self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you are using an explicit closure for copying elements
[INFO] [stdout]   --> src/bin/04.rs:77:5
[INFO] [stdout]    |
[INFO] [stdout] 77 | /     rolls
[INFO] [stdout] 78 | |         .iter()
[INFO] [stdout] 79 | |         .filter(move |coord| roll_accessible(**coord, rolls, dimensions))
[INFO] [stdout] 80 | |         .map(|coord| *coord)
[INFO] [stdout]    | |____________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stdout]    = note: `#[warn(clippy::map_clone)]` on by default
[INFO] [stdout] help: consider calling the dedicated `copied` method
[INFO] [stdout]    |
[INFO] [stdout] 77 ~     rolls
[INFO] [stdout] 78 +         .iter()
[INFO] [stdout] 79 +         .filter(move |coord| roll_accessible(**coord, rolls, dimensions)).copied()
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: unused variable: `input`
[INFO] [stdout]   --> src/bin/10.rs:92:17
[INFO] [stdout]    |
[INFO] [stdout] 92 | pub fn part_two(input: &str) -> Option<u64> {
[INFO] [stdout]    |                 ^^^^^ help: if this is intentional, prefix it with an underscore: `_input`
[INFO] [stdout]    |
[INFO] [stdout]    = note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: field `joltage_requirements` is never read
[INFO] [stdout]   --> src/bin/10.rs:10:5
[INFO] [stdout]    |
[INFO] [stdout]  7 | struct Machine {
[INFO] [stdout]    |        ------- field in this struct
[INFO] [stdout] ...
[INFO] [stdout] 10 |     joltage_requirements: Vec<u16>,
[INFO] [stdout]    |     ^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = note: `#[warn(dead_code)]` (part of `#[warn(unused)]`) on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you are using an explicit closure for copying elements
[INFO] [stdout]   --> src/bin/04.rs:77:5
[INFO] [stdout]    |
[INFO] [stdout] 77 | /     rolls
[INFO] [stdout] 78 | |         .iter()
[INFO] [stdout] 79 | |         .filter(move |coord| roll_accessible(**coord, rolls, dimensions))
[INFO] [stdout] 80 | |         .map(|coord| *coord)
[INFO] [stdout]    | |____________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stdout]    = note: `#[warn(clippy::map_clone)]` on by default
[INFO] [stdout] help: consider calling the dedicated `copied` method
[INFO] [stdout]    |
[INFO] [stdout] 77 ~     rolls
[INFO] [stdout] 78 +         .iter()
[INFO] [stdout] 79 +         .filter(move |coord| roll_accessible(**coord, rolls, dimensions)).copied()
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: found call to `str::trim` before `str::split_whitespace`
[INFO] [stdout]   --> src/bin/06.rs:26:26
[INFO] [stdout]    |
[INFO] [stdout] 26 |         .map(|line| line.trim().split_whitespace().collect_vec())
[INFO] [stdout]    |                          ^^^^^^^ help: remove `trim()`
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#trim_split_whitespace
[INFO] [stdout]    = note: `#[warn(clippy::trim_split_whitespace)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: length comparison to zero
[INFO] [stdout]   --> src/bin/10.rs:21:17
[INFO] [stdout]    |
[INFO] [stdout] 21 |         assert!(button_parts.len() > 0);
[INFO] [stdout]    |                 ^^^^^^^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!button_parts.is_empty()`
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
[INFO] [stdout]    = note: `#[warn(clippy::len_zero)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you are using an explicit closure for copying elements
[INFO] [stdout]    --> src/bin/04.rs:97:13
[INFO] [stdout]     |
[INFO] [stdout]  97 | /             neighbors_to_check
[INFO] [stdout]  98 | |                 .iter()
[INFO] [stdout]  99 | |                 .filter(|coord| roll_accessible(**coord, rolls, dimensions))
[INFO] [stdout] 100 | |                 .map(|coord| *coord)
[INFO] [stdout]     | |____________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stdout] help: consider calling the dedicated `copied` method
[INFO] [stdout]     |
[INFO] [stdout]  97 ~             neighbors_to_check
[INFO] [stdout]  98 +                 .iter()
[INFO] [stdout]  99 +                 .filter(|coord| roll_accessible(**coord, rolls, dimensions)).copied()
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you are using an explicit closure for copying elements
[INFO] [stdout]    --> src/bin/04.rs:97:13
[INFO] [stdout]     |
[INFO] [stdout]  97 | /             neighbors_to_check
[INFO] [stdout]  98 | |                 .iter()
[INFO] [stdout]  99 | |                 .filter(|coord| roll_accessible(**coord, rolls, dimensions))
[INFO] [stdout] 100 | |                 .map(|coord| *coord)
[INFO] [stdout]     | |____________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
[INFO] [stdout] help: consider calling the dedicated `copied` method
[INFO] [stdout]     |
[INFO] [stdout]  97 ~             neighbors_to_check
[INFO] [stdout]  98 +                 .iter()
[INFO] [stdout]  99 +                 .filter(|coord| roll_accessible(**coord, rolls, dimensions)).copied()
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]   --> src/bin/08.rs:29:13
[INFO] [stdout]    |
[INFO] [stdout] 29 |     coords: &Vec<Coord3D>,
[INFO] [stdout]    |             ^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]    = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]    |
[INFO] [stdout] 29 -     coords: &Vec<Coord3D>,
[INFO] [stdout] 29 +     coords: &[Coord3D],
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]   --> src/bin/08.rs:29:13
[INFO] [stdout]    |
[INFO] [stdout] 29 |     coords: &Vec<Coord3D>,
[INFO] [stdout]    |             ^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]    = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]    |
[INFO] [stdout] 29 -     coords: &Vec<Coord3D>,
[INFO] [stdout] 29 +     coords: &[Coord3D],
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the following explicit lifetimes could be elided: 'a
[INFO] [stdout]   --> src/bin/11.rs:50:21
[INFO] [stdout]    |
[INFO] [stdout] 50 | fn get_graph_routes<'a>(
[INFO] [stdout]    |                     ^^
[INFO] [stdout] 51 |     graph: &'a Graph,
[INFO] [stdout]    |             ^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
[INFO] [stdout]    = note: `#[warn(clippy::needless_lifetimes)]` on by default
[INFO] [stdout] help: elide the lifetimes
[INFO] [stdout]    |
[INFO] [stdout] 50 ~ fn get_graph_routes(
[INFO] [stdout] 51 ~     graph: &Graph,
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]   --> src/bin/11.rs:73:49
[INFO] [stdout]    |
[INFO] [stdout] 73 |               let this_node_has_multiple_inputs = graph
[INFO] [stdout]    |  _________________________________________________^
[INFO] [stdout] 74 | |                 .inputs
[INFO] [stdout] 75 | |                 .get(start_node)
[INFO] [stdout] 76 | |                 .map_or(false, |inputs| inputs.len() > 1);
[INFO] [stdout]    | |_________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout]    = note: `#[warn(clippy::unnecessary_map_or)]` on by default
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]    |
[INFO] [stdout] 76 -                 .map_or(false, |inputs| inputs.len() > 1);
[INFO] [stdout] 76 +                 .is_some_and(|inputs| inputs.len() > 1);
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:100:5
[INFO] [stdout]     |
[INFO] [stdout] 100 | /     loop {
[INFO] [stdout] 101 | |         match process_queue.pop_front() {
[INFO] [stdout] 102 | |             Some(node_to_process) => {
[INFO] [stdout] 103 | |                 let node_is_new = found_going_down.insert(node_to_process.clone());
[INFO] [stdout] ...   |
[INFO] [stdout] 118 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout]     = note: `#[warn(clippy::while_let_loop)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:127:5
[INFO] [stdout]     |
[INFO] [stdout] 127 | /     loop {
[INFO] [stdout] 128 | |         match process_queue.pop_front() {
[INFO] [stdout] 129 | |             Some(node_to_process) => {
[INFO] [stdout] 130 | |                 let node_is_new = found_going_up.insert(node_to_process.clone());
[INFO] [stdout] ...   |
[INFO] [stdout] 145 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: usage of `bool::then` in `filter_map`
[INFO] [stdout]    --> src/bin/11.rs:163:49
[INFO] [stdout]     |
[INFO] [stdout] 163 |           HashMap::from_iter(graph.outputs.keys().filter_map(|node| {
[INFO] [stdout]     |  _________________________________________________^
[INFO] [stdout] 164 | |             restrict_to_nodes
[INFO] [stdout] 165 | |                 .contains(node)
[INFO] [stdout] 166 | |                 .then(|| (node.clone(), ProcessingState::NotStarted))
[INFO] [stdout] 167 | |         }));
[INFO] [stdout]     | |__________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#filter_map_bool_then
[INFO] [stdout]     = note: `#[warn(clippy::filter_map_bool_then)]` on by default
[INFO] [stdout] help: use `filter` then `map` instead
[INFO] [stdout]     |
[INFO] [stdout] 163 ~         HashMap::from_iter(graph.outputs.keys().filter(|&node| restrict_to_nodes
[INFO] [stdout] 164 ~                 .contains(node)).map(|node| (node.clone(), ProcessingState::NotStarted)));
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:173:5
[INFO] [stdout]     |
[INFO] [stdout] 173 | /     loop {
[INFO] [stdout] 174 | |         // println!("{:?}, {:?}", process_queue, processing_states);
[INFO] [stdout] 175 | |         match process_queue.pop_front() {
[INFO] [stdout] 176 | |             Some(node_to_process) => match processing_states.get(&node_to_process) {
[INFO] [stdout] ...   |
[INFO] [stdout] 226 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/11.rs:176:38
[INFO] [stdout]     |
[INFO] [stdout] 176 |               Some(node_to_process) => match processing_states.get(&node_to_process) {
[INFO] [stdout]     |  ______________________________________^
[INFO] [stdout] 177 | |                 Some(state) => match state {
[INFO] [stdout] 178 | |                     ProcessingState::NotStarted | ProcessingState::InProgress => {
[INFO] [stdout] 179 | |                         let node_children = graph.outputs.get(&node_to_process).unwrap();
[INFO] [stdout] ...   |
[INFO] [stdout] 222 | |                 None => {}
[INFO] [stdout] 223 | |             },
[INFO] [stdout]     | |_____________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]     = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]     |
[INFO] [stdout] 176 ~             Some(node_to_process) => if let Some(state) = processing_states.get(&node_to_process) { match state {
[INFO] [stdout] 177 +                 ProcessingState::NotStarted | ProcessingState::InProgress => {
[INFO] [stdout] 178 +                     let node_children = graph.outputs.get(&node_to_process).unwrap();
[INFO] [stdout] 179 + 
[INFO] [stdout] 180 +                     let all_done_result =
[INFO] [stdout] 181 +                         node_children.iter().fold(Some(0), |acc, child| {
[INFO] [stdout] 182 +                             match (acc, processing_states.get(child)) {
[INFO] [stdout] 183 +                                 (Some(acc), Some(ProcessingState::Done(x))) => Some(acc + x),
[INFO] [stdout] 184 +                                 (Some(acc), None) => Some(acc),
[INFO] [stdout] 185 +                                 _ => None,
[INFO] [stdout] 186 +                             }
[INFO] [stdout] 187 +                         });
[INFO] [stdout] 188 + 
[INFO] [stdout] 189 +                     let my_new_state = match all_done_result {
[INFO] [stdout] 190 +                         Some(paths) => {
[INFO] [stdout] 191 +                             let mut new_process_queue = VecDeque::from(
[INFO] [stdout] 192 +                                 graph
[INFO] [stdout] 193 +                                     .inputs
[INFO] [stdout] 194 +                                     .get(&node_to_process)
[INFO] [stdout] 195 +                                     .unwrap_or(&vec![])
[INFO] [stdout] 196 +                                     .clone(),
[INFO] [stdout] 197 +                             );
[INFO] [stdout] 198 +                             new_process_queue.append(&mut process_queue);
[INFO] [stdout] 199 +                             process_queue = new_process_queue;
[INFO] [stdout] 200 +                             ProcessingState::Done(paths)
[INFO] [stdout] 201 +                         }
[INFO] [stdout] 202 +                         None => {
[INFO] [stdout] 203 +                             process_queue.append(&mut VecDeque::from(node_children.clone()));
[INFO] [stdout] 204 +                             ProcessingState::InProgress
[INFO] [stdout] 205 +                         }
[INFO] [stdout] 206 +                     };
[INFO] [stdout] 207 + 
[INFO] [stdout] 208 +                     processing_states.insert(node_to_process.clone(), my_new_state.clone());
[INFO] [stdout] 209 + 
[INFO] [stdout] 210 +                     match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout] 211 +                         (true, ProcessingState::Done(_)) => break,
[INFO] [stdout] 212 +                         _ => {}
[INFO] [stdout] 213 +                     };
[INFO] [stdout] 214 +                 }
[INFO] [stdout] 215 +                 ProcessingState::Done(_) => {
[INFO] [stdout] 216 +                     if node_to_process == end_node.to_owned() {
[INFO] [stdout] 217 +                         break;
[INFO] [stdout] 218 +                     }
[INFO] [stdout] 219 +                 }
[INFO] [stdout] 220 ~             } },
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: usage of `Iterator::fold` on a type that implements `Try`
[INFO] [stdout]    --> src/bin/11.rs:182:50
[INFO] [stdout]     |
[INFO] [stdout] 182 |   ...                   node_children.iter().fold(Some(0), |acc, child| {
[INFO] [stdout]     |  ____________________________________________^
[INFO] [stdout] 183 | | ...                       match (acc, processing_states.get(child)) {
[INFO] [stdout] 184 | | ...                           (Some(acc), Some(ProcessingState::Done(x))) => Some(acc + x),
[INFO] [stdout] 185 | | ...                           (Some(acc), None) => Some(acc),
[INFO] [stdout] ...   |
[INFO] [stdout] 188 | | ...                   });
[INFO] [stdout]     | |________________________^ help: use `try_fold` instead: `try_fold(0, |acc, child| ...)`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_try_fold
[INFO] [stdout]     = note: `#[warn(clippy::manual_try_fold)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/11.rs:211:25
[INFO] [stdout]     |
[INFO] [stdout] 211 | /                         match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout] 212 | |                             (true, ProcessingState::Done(_)) => break,
[INFO] [stdout] 213 | |                             _ => {}
[INFO] [stdout] 214 | |                         };
[INFO] [stdout]     | |_________________________^ help: try: `if let (true, ProcessingState::Done(_)) = (node_to_process == end_node.to_owned(), my_new_state) { break }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this creates an owned instance just for comparison
[INFO] [stdout]    --> src/bin/11.rs:211:51
[INFO] [stdout]     |
[INFO] [stdout] 211 |                         match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout]     |                                                   ^^^^^^^^^^^^^^^^^^^ help: try: `end_node`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cmp_owned
[INFO] [stdout]     = note: `#[warn(clippy::cmp_owned)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this creates an owned instance just for comparison
[INFO] [stdout]    --> src/bin/11.rs:217:47
[INFO] [stdout]     |
[INFO] [stdout] 217 |                         if node_to_process == end_node.to_owned() {
[INFO] [stdout]     |                                               ^^^^^^^^^^^^^^^^^^^ help: try: `end_node`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cmp_owned
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: found call to `str::trim` before `str::split_whitespace`
[INFO] [stdout]   --> src/bin/06.rs:26:26
[INFO] [stdout]    |
[INFO] [stdout] 26 |         .map(|line| line.trim().split_whitespace().collect_vec())
[INFO] [stdout]    |                          ^^^^^^^ help: remove `trim()`
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#trim_split_whitespace
[INFO] [stdout]    = note: `#[warn(clippy::trim_split_whitespace)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]   --> src/bin/10.rs:58:38
[INFO] [stdout]    |
[INFO] [stdout] 58 |     fn find_min_presses_to_configure(self: &Self) -> Option<u64> {
[INFO] [stdout]    |                                      ^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout]    = note: `#[warn(clippy::needless_arbitrary_self_type)]` on by default
[INFO] [stdout] help: remove the type
[INFO] [stdout]    |
[INFO] [stdout] 58 -     fn find_min_presses_to_configure(self: &Self) -> Option<u64> {
[INFO] [stdout] 58 +     fn find_min_presses_to_configure(&self) -> Option<u64> {
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]   --> src/bin/10.rs:65:31
[INFO] [stdout]    |
[INFO] [stdout] 65 |     fn buttons_satisfy_lights(self: &Self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout]    |                               ^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]    |
[INFO] [stdout] 65 -     fn buttons_satisfy_lights(self: &Self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout] 65 +     fn buttons_satisfy_lights(&self, buttons_to_press: &Vec<usize>) -> bool {
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]   --> src/bin/05.rs:38:13
[INFO] [stdout]    |
[INFO] [stdout] 38 |     ranges: &Vec<RangeInclusive<u64>>,
[INFO] [stdout]    |             ^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]    = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]    |
[INFO] [stdout] 38 -     ranges: &Vec<RangeInclusive<u64>>,
[INFO] [stdout] 38 +     ranges: &[RangeInclusive<u64>],
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this boolean expression can be simplified
[INFO] [stdout]   --> src/bin/05.rs:47:16
[INFO] [stdout]    |
[INFO] [stdout] 47 |               if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout]    |  ________________^
[INFO] [stdout] 48 | |                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 | |                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 | |                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout]    | |________________________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
[INFO] [stdout]    = note: `#[warn(clippy::nonminimal_bool)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 -                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout] 47 +             if !(lower_above_min && !upper_below_max && range.start() > cmp_range.end() || !lower_above_min && upper_below_max && range.end() < cmp_range.start())
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 -                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout] 47 +             if (range.end() >= cmp_range.start() || !upper_below_max || lower_above_min) && (range.start() <= cmp_range.end() || upper_below_max || !lower_above_min)
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this boolean expression can be simplified
[INFO] [stdout]   --> src/bin/05.rs:47:16
[INFO] [stdout]    |
[INFO] [stdout] 47 |               if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout]    |  ________________^
[INFO] [stdout] 48 | |                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 | |                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout]    | |________________________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 47 +             if !(!lower_above_min && upper_below_max || lower_above_min && !upper_below_max && range.start() > cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 47 +             if (range.start() <= cmp_range.end() || upper_below_max || !lower_above_min) && (!upper_below_max || lower_above_min) // range extends upper end of cmp_range
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the following explicit lifetimes could be elided: 'a
[INFO] [stdout]   --> src/bin/11.rs:50:21
[INFO] [stdout]    |
[INFO] [stdout] 50 | fn get_graph_routes<'a>(
[INFO] [stdout]    |                     ^^
[INFO] [stdout] 51 |     graph: &'a Graph,
[INFO] [stdout]    |             ^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
[INFO] [stdout]    = note: `#[warn(clippy::needless_lifetimes)]` on by default
[INFO] [stdout] help: elide the lifetimes
[INFO] [stdout]    |
[INFO] [stdout] 50 ~ fn get_graph_routes(
[INFO] [stdout] 51 ~     graph: &Graph,
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]   --> src/bin/11.rs:73:49
[INFO] [stdout]    |
[INFO] [stdout] 73 |               let this_node_has_multiple_inputs = graph
[INFO] [stdout]    |  _________________________________________________^
[INFO] [stdout] 74 | |                 .inputs
[INFO] [stdout] 75 | |                 .get(start_node)
[INFO] [stdout] 76 | |                 .map_or(false, |inputs| inputs.len() > 1);
[INFO] [stdout]    | |_________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout]    = note: `#[warn(clippy::unnecessary_map_or)]` on by default
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]    |
[INFO] [stdout] 76 -                 .map_or(false, |inputs| inputs.len() > 1);
[INFO] [stdout] 76 +                 .is_some_and(|inputs| inputs.len() > 1);
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:100:5
[INFO] [stdout]     |
[INFO] [stdout] 100 | /     loop {
[INFO] [stdout] 101 | |         match process_queue.pop_front() {
[INFO] [stdout] 102 | |             Some(node_to_process) => {
[INFO] [stdout] 103 | |                 let node_is_new = found_going_down.insert(node_to_process.clone());
[INFO] [stdout] ...   |
[INFO] [stdout] 118 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout]     = note: `#[warn(clippy::while_let_loop)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:127:5
[INFO] [stdout]     |
[INFO] [stdout] 127 | /     loop {
[INFO] [stdout] 128 | |         match process_queue.pop_front() {
[INFO] [stdout] 129 | |             Some(node_to_process) => {
[INFO] [stdout] 130 | |                 let node_is_new = found_going_up.insert(node_to_process.clone());
[INFO] [stdout] ...   |
[INFO] [stdout] 145 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: usage of `bool::then` in `filter_map`
[INFO] [stdout]    --> src/bin/11.rs:163:49
[INFO] [stdout]     |
[INFO] [stdout] 163 |           HashMap::from_iter(graph.outputs.keys().filter_map(|node| {
[INFO] [stdout]     |  _________________________________________________^
[INFO] [stdout] 164 | |             restrict_to_nodes
[INFO] [stdout] 165 | |                 .contains(node)
[INFO] [stdout] 166 | |                 .then(|| (node.clone(), ProcessingState::NotStarted))
[INFO] [stdout] 167 | |         }));
[INFO] [stdout]     | |__________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#filter_map_bool_then
[INFO] [stdout]     = note: `#[warn(clippy::filter_map_bool_then)]` on by default
[INFO] [stdout] help: use `filter` then `map` instead
[INFO] [stdout]     |
[INFO] [stdout] 163 ~         HashMap::from_iter(graph.outputs.keys().filter(|&node| restrict_to_nodes
[INFO] [stdout] 164 ~                 .contains(node)).map(|node| (node.clone(), ProcessingState::NotStarted)));
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this loop could be written as a `while let` loop
[INFO] [stdout]    --> src/bin/11.rs:173:5
[INFO] [stdout]     |
[INFO] [stdout] 173 | /     loop {
[INFO] [stdout] 174 | |         // println!("{:?}, {:?}", process_queue, processing_states);
[INFO] [stdout] 175 | |         match process_queue.pop_front() {
[INFO] [stdout] 176 | |             Some(node_to_process) => match processing_states.get(&node_to_process) {
[INFO] [stdout] ...   |
[INFO] [stdout] 226 | |     }
[INFO] [stdout]     | |_____^ help: try: `while let Some(node_to_process) = process_queue.pop_front() { .. }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_loop
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/11.rs:176:38
[INFO] [stdout]     |
[INFO] [stdout] 176 |               Some(node_to_process) => match processing_states.get(&node_to_process) {
[INFO] [stdout]     |  ______________________________________^
[INFO] [stdout] 177 | |                 Some(state) => match state {
[INFO] [stdout] 178 | |                     ProcessingState::NotStarted | ProcessingState::InProgress => {
[INFO] [stdout] 179 | |                         let node_children = graph.outputs.get(&node_to_process).unwrap();
[INFO] [stdout] ...   |
[INFO] [stdout] 222 | |                 None => {}
[INFO] [stdout] 223 | |             },
[INFO] [stdout]     | |_____________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]     = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]     |
[INFO] [stdout] 176 ~             Some(node_to_process) => if let Some(state) = processing_states.get(&node_to_process) { match state {
[INFO] [stdout] 177 +                 ProcessingState::NotStarted | ProcessingState::InProgress => {
[INFO] [stdout] 178 +                     let node_children = graph.outputs.get(&node_to_process).unwrap();
[INFO] [stdout] 179 + 
[INFO] [stdout] 180 +                     let all_done_result =
[INFO] [stdout] 181 +                         node_children.iter().fold(Some(0), |acc, child| {
[INFO] [stdout] 182 +                             match (acc, processing_states.get(child)) {
[INFO] [stdout] 183 +                                 (Some(acc), Some(ProcessingState::Done(x))) => Some(acc + x),
[INFO] [stdout] 184 +                                 (Some(acc), None) => Some(acc),
[INFO] [stdout] 185 +                                 _ => None,
[INFO] [stdout] 186 +                             }
[INFO] [stdout] 187 +                         });
[INFO] [stdout] 188 + 
[INFO] [stdout] 189 +                     let my_new_state = match all_done_result {
[INFO] [stdout] 190 +                         Some(paths) => {
[INFO] [stdout] 191 +                             let mut new_process_queue = VecDeque::from(
[INFO] [stdout] 192 +                                 graph
[INFO] [stdout] 193 +                                     .inputs
[INFO] [stdout] 194 +                                     .get(&node_to_process)
[INFO] [stdout] 195 +                                     .unwrap_or(&vec![])
[INFO] [stdout] 196 +                                     .clone(),
[INFO] [stdout] 197 +                             );
[INFO] [stdout] 198 +                             new_process_queue.append(&mut process_queue);
[INFO] [stdout] 199 +                             process_queue = new_process_queue;
[INFO] [stdout] 200 +                             ProcessingState::Done(paths)
[INFO] [stdout] 201 +                         }
[INFO] [stdout] 202 +                         None => {
[INFO] [stdout] 203 +                             process_queue.append(&mut VecDeque::from(node_children.clone()));
[INFO] [stdout] 204 +                             ProcessingState::InProgress
[INFO] [stdout] 205 +                         }
[INFO] [stdout] 206 +                     };
[INFO] [stdout] 207 + 
[INFO] [stdout] 208 +                     processing_states.insert(node_to_process.clone(), my_new_state.clone());
[INFO] [stdout] 209 + 
[INFO] [stdout] 210 +                     match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout] 211 +                         (true, ProcessingState::Done(_)) => break,
[INFO] [stdout] 212 +                         _ => {}
[INFO] [stdout] 213 +                     };
[INFO] [stdout] 214 +                 }
[INFO] [stdout] 215 +                 ProcessingState::Done(_) => {
[INFO] [stdout] 216 +                     if node_to_process == end_node.to_owned() {
[INFO] [stdout] 217 +                         break;
[INFO] [stdout] 218 +                     }
[INFO] [stdout] 219 +                 }
[INFO] [stdout] 220 ~             } },
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: usage of `Iterator::fold` on a type that implements `Try`
[INFO] [stdout]    --> src/bin/11.rs:182:50
[INFO] [stdout]     |
[INFO] [stdout] 182 |   ...                   node_children.iter().fold(Some(0), |acc, child| {
[INFO] [stdout]     |  ____________________________________________^
[INFO] [stdout] 183 | | ...                       match (acc, processing_states.get(child)) {
[INFO] [stdout] 184 | | ...                           (Some(acc), Some(ProcessingState::Done(x))) => Some(acc + x),
[INFO] [stdout] 185 | | ...                           (Some(acc), None) => Some(acc),
[INFO] [stdout] ...   |
[INFO] [stdout] 188 | | ...                   });
[INFO] [stdout]     | |________________________^ help: use `try_fold` instead: `try_fold(0, |acc, child| ...)`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_try_fold
[INFO] [stdout]     = note: `#[warn(clippy::manual_try_fold)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/11.rs:211:25
[INFO] [stdout]     |
[INFO] [stdout] 211 | /                         match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout] 212 | |                             (true, ProcessingState::Done(_)) => break,
[INFO] [stdout] 213 | |                             _ => {}
[INFO] [stdout] 214 | |                         };
[INFO] [stdout]     | |_________________________^ help: try: `if let (true, ProcessingState::Done(_)) = (node_to_process == end_node.to_owned(), my_new_state) { break }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this creates an owned instance just for comparison
[INFO] [stdout]    --> src/bin/11.rs:211:51
[INFO] [stdout]     |
[INFO] [stdout] 211 |                         match (node_to_process == end_node.to_owned(), my_new_state) {
[INFO] [stdout]     |                                                   ^^^^^^^^^^^^^^^^^^^ help: try: `end_node`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cmp_owned
[INFO] [stdout]     = note: `#[warn(clippy::cmp_owned)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this creates an owned instance just for comparison
[INFO] [stdout]    --> src/bin/11.rs:217:47
[INFO] [stdout]     |
[INFO] [stdout] 217 |                         if node_to_process == end_node.to_owned() {
[INFO] [stdout]     |                                               ^^^^^^^^^^^^^^^^^^^ help: try: `end_node`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#cmp_owned
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: unused variable: `input`
[INFO] [stdout]   --> src/bin/10.rs:92:17
[INFO] [stdout]    |
[INFO] [stdout] 92 | pub fn part_two(input: &str) -> Option<u64> {
[INFO] [stdout]    |                 ^^^^^ help: if this is intentional, prefix it with an underscore: `_input`
[INFO] [stdout]    |
[INFO] [stdout]    = note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: field `joltage_requirements` is never read
[INFO] [stdout]   --> src/bin/10.rs:10:5
[INFO] [stdout]    |
[INFO] [stdout]  7 | struct Machine {
[INFO] [stdout]    |        ------- field in this struct
[INFO] [stdout] ...
[INFO] [stdout] 10 |     joltage_requirements: Vec<u16>,
[INFO] [stdout]    |     ^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = note: `#[warn(dead_code)]` (part of `#[warn(unused)]`) on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]    --> src/bin/09.rs:152:16
[INFO] [stdout]     |
[INFO] [stdout] 152 |               && self
[INFO] [stdout]     |  ________________^
[INFO] [stdout] 153 | |                 .get_interior_range()
[INFO] [stdout] 154 | |                 .map_or(false, |range| range.contains(&other.cross_pos))
[INFO] [stdout]     | |________________________________________________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout]     = note: `#[warn(clippy::unnecessary_map_or)]` on by default
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]     |
[INFO] [stdout] 154 -                 .map_or(false, |range| range.contains(&other.cross_pos))
[INFO] [stdout] 154 +                 .is_some_and(|range| range.contains(&other.cross_pos))
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]    --> src/bin/09.rs:155:16
[INFO] [stdout]     |
[INFO] [stdout] 155 |               && other
[INFO] [stdout]     |  ________________^
[INFO] [stdout] 156 | |                 .get_interior_range()
[INFO] [stdout] 157 | |                 .map_or(false, |range| range.contains(&self.cross_pos))
[INFO] [stdout]     | |_______________________________________________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]     |
[INFO] [stdout] 157 -                 .map_or(false, |range| range.contains(&self.cross_pos))
[INFO] [stdout] 157 +                 .is_some_and(|range| range.contains(&self.cross_pos))
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: length comparison to zero
[INFO] [stdout]   --> src/bin/10.rs:21:17
[INFO] [stdout]    |
[INFO] [stdout] 21 |         assert!(button_parts.len() > 0);
[INFO] [stdout]    |                 ^^^^^^^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!button_parts.is_empty()`
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
[INFO] [stdout]    = note: `#[warn(clippy::len_zero)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]    --> src/bin/09.rs:293:14
[INFO] [stdout]     |
[INFO] [stdout] 293 |     outline: &Vec<Line>,
[INFO] [stdout]     |              ^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]     = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]     |
[INFO] [stdout] 293 -     outline: &Vec<Line>,
[INFO] [stdout] 293 +     outline: &[Line],
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/09.rs:298:5
[INFO] [stdout]     |
[INFO] [stdout] 298 | /     match memo {
[INFO] [stdout] 299 | |         Some(memo_val) => return *memo_val,
[INFO] [stdout] 300 | |         None => {}
[INFO] [stdout] 301 | |     }
[INFO] [stdout]     | |_____^ help: try: `if let Some(memo_val) = memo { return *memo_val }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]     = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: unnecessary use of `to_owned`
[INFO] [stdout]    --> src/bin/09.rs:330:49
[INFO] [stdout]     |
[INFO] [stdout] 330 |     let (tile_xs, _tile_ys): (Vec<_>, Vec<_>) = red_tiles.to_owned().into_iter().unzip();
[INFO] [stdout]     |                                                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use: `red_tiles.iter().copied()`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_to_owned
[INFO] [stdout]     = note: `#[warn(clippy::unnecessary_to_owned)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:115:18
[INFO] [stdout]     |
[INFO] [stdout] 115 |     fn get_range(self: &Self) -> RangeInclusive<usize> {
[INFO] [stdout]     |                  ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout]     = note: `#[warn(clippy::needless_arbitrary_self_type)]` on by default
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 115 -     fn get_range(self: &Self) -> RangeInclusive<usize> {
[INFO] [stdout] 115 +     fn get_range(&self) -> RangeInclusive<usize> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:124:27
[INFO] [stdout]     |
[INFO] [stdout] 124 |     fn get_interior_range(self: &Self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout]     |                           ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 124 -     fn get_interior_range(self: &Self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout] 124 +     fn get_interior_range(&self) -> Option<RangeInclusive<usize>> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:136:25
[INFO] [stdout]     |
[INFO] [stdout] 136 |     fn perpendicular_to(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                         ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 136 -     fn perpendicular_to(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 136 +     fn perpendicular_to(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:146:21
[INFO] [stdout]     |
[INFO] [stdout] 146 |     fn _inline_with(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                     ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 146 -     fn _inline_with(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 146 +     fn _inline_with(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:150:19
[INFO] [stdout]     |
[INFO] [stdout] 150 |     fn intersects(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                   ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 150 -     fn intersects(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 150 +     fn intersects(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:160:18
[INFO] [stdout]     |
[INFO] [stdout] 160 |     fn _overlaps(self: &Self, other: &Self) -> bool {
[INFO] [stdout]     |                  ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 160 -     fn _overlaps(self: &Self, other: &Self) -> bool {
[INFO] [stdout] 160 +     fn _overlaps(&self, other: &Self) -> bool {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:170:23
[INFO] [stdout]     |
[INFO] [stdout] 170 |     fn _get_repr_at_y(self: &Self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout]     |                       ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 170 -     fn _get_repr_at_y(self: &Self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout] 170 +     fn _get_repr_at_y(&self, y: usize) -> Vec<(usize, char)> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: the type of the `self` parameter does not need to be arbitrary
[INFO] [stdout]    --> src/bin/09.rs:212:31
[INFO] [stdout]     |
[INFO] [stdout] 212 |     fn iter_coords_except_end(self: &Self) -> impl Iterator<Item = Coord> {
[INFO] [stdout]     |                               ^^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
[INFO] [stdout] help: remove the type
[INFO] [stdout]     |
[INFO] [stdout] 212 -     fn iter_coords_except_end(self: &Self) -> impl Iterator<Item = Coord> {
[INFO] [stdout] 212 +     fn iter_coords_except_end(&self) -> impl Iterator<Item = Coord> {
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]   --> src/bin/05.rs:38:13
[INFO] [stdout]    |
[INFO] [stdout] 38 |     ranges: &Vec<RangeInclusive<u64>>,
[INFO] [stdout]    |             ^^^^^^^^^^^^^^^^^^^^^^^^^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]    = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]    |
[INFO] [stdout] 38 -     ranges: &Vec<RangeInclusive<u64>>,
[INFO] [stdout] 38 +     ranges: &[RangeInclusive<u64>],
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this boolean expression can be simplified
[INFO] [stdout]   --> src/bin/05.rs:47:16
[INFO] [stdout]    |
[INFO] [stdout] 47 |               if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout]    |  ________________^
[INFO] [stdout] 48 | |                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 | |                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 | |                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout]    | |________________________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
[INFO] [stdout]    = note: `#[warn(clippy::nonminimal_bool)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 -                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout] 47 +             if !(lower_above_min && !upper_below_max && range.start() > cmp_range.end() || !lower_above_min && upper_below_max && range.end() < cmp_range.start())
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 50 -                 || (upper_below_max && range.end() >= cmp_range.start())
[INFO] [stdout] 47 +             if (range.end() >= cmp_range.start() || !upper_below_max || lower_above_min) && (range.start() <= cmp_range.end() || upper_below_max || !lower_above_min)
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this boolean expression can be simplified
[INFO] [stdout]   --> src/bin/05.rs:47:16
[INFO] [stdout]    |
[INFO] [stdout] 47 |               if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout]    |  ________________^
[INFO] [stdout] 48 | |                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 | |                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout]    | |________________________________________________________________________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 47 +             if !(!lower_above_min && upper_below_max || lower_above_min && !upper_below_max && range.start() > cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout]    |
[INFO] [stdout] 47 -             if (lower_above_min && upper_below_max) // range fully covered by cmp_range
[INFO] [stdout] 48 -                 || (!lower_above_min && !upper_below_max) // cmp_range fully covered by range
[INFO] [stdout] 49 -                 || (lower_above_min && range.start() <= cmp_range.end()) // range extends upper end of cmp_range
[INFO] [stdout] 47 +             if (range.start() <= cmp_range.end() || upper_below_max || !lower_above_min) && (!upper_below_max || lower_above_min) // range extends upper end of cmp_range
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]   --> src/bin/03.rs:28:9
[INFO] [stdout]    |
[INFO] [stdout] 28 | /         match found {
[INFO] [stdout] 29 | |             Some((drop_index, _)) => {
[INFO] [stdout] 30 | |                 digits.remove(drop_index);
[INFO] [stdout] 31 | |                 digits.push(*digit);
[INFO] [stdout] 32 | |             }
[INFO] [stdout] 33 | |             None => {}
[INFO] [stdout] 34 | |         }
[INFO] [stdout]    | |_________^
[INFO] [stdout]    |
[INFO] [stdout]    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]    = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] help: try
[INFO] [stdout]    |
[INFO] [stdout] 28 ~         if let Some((drop_index, _)) = found {
[INFO] [stdout] 29 +             digits.remove(drop_index);
[INFO] [stdout] 30 +             digits.push(*digit);
[INFO] [stdout] 31 +         }
[INFO] [stdout]    |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]    --> src/bin/09.rs:152:16
[INFO] [stdout]     |
[INFO] [stdout] 152 |               && self
[INFO] [stdout]     |  ________________^
[INFO] [stdout] 153 | |                 .get_interior_range()
[INFO] [stdout] 154 | |                 .map_or(false, |range| range.contains(&other.cross_pos))
[INFO] [stdout]     | |________________________________________________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout]     = note: `#[warn(clippy::unnecessary_map_or)]` on by default
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]     |
[INFO] [stdout] 154 -                 .map_or(false, |range| range.contains(&other.cross_pos))
[INFO] [stdout] 154 +                 .is_some_and(|range| range.contains(&other.cross_pos))
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: this `map_or` can be simplified
[INFO] [stdout]    --> src/bin/09.rs:155:16
[INFO] [stdout]     |
[INFO] [stdout] 155 |               && other
[INFO] [stdout]     |  ________________^
[INFO] [stdout] 156 | |                 .get_interior_range()
[INFO] [stdout] 157 | |                 .map_or(false, |range| range.contains(&self.cross_pos))
[INFO] [stdout]     | |_______________________________________________________________________^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_map_or
[INFO] [stdout] help: use `is_some_and` instead
[INFO] [stdout]     |
[INFO] [stdout] 157 -                 .map_or(false, |range| range.contains(&self.cross_pos))
[INFO] [stdout] 157 +                 .is_some_and(|range| range.contains(&self.cross_pos))
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
[INFO] [stdout]    --> src/bin/09.rs:293:14
[INFO] [stdout]     |
[INFO] [stdout] 293 |     outline: &Vec<Line>,
[INFO] [stdout]     |              ^^^^^^^^^^
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
[INFO] [stdout]     = note: `#[warn(clippy::ptr_arg)]` on by default
[INFO] [stdout] help: change this to
[INFO] [stdout]     |
[INFO] [stdout] 293 -     outline: &Vec<Line>,
[INFO] [stdout] 293 +     outline: &[Line],
[INFO] [stdout]     |
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let`
[INFO] [stdout]    --> src/bin/09.rs:298:5
[INFO] [stdout]     |
[INFO] [stdout] 298 | /     match memo {
[INFO] [stdout] 299 | |         Some(memo_val) => return *memo_val,
[INFO] [stdout] 300 | |         None => {}
[INFO] [stdout] 301 | |     }
[INFO] [stdout]     | |_____^ help: try: `if let Some(memo_val) = memo { return *memo_val }`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
[INFO] [stdout]     = note: `#[warn(clippy::single_match)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stdout] warning: unnecessary use of `to_owned`
[INFO] [stdout]    --> src/bin/09.rs:330:49
[INFO] [stdout]     |
[INFO] [stdout] 330 |     let (tile_xs, _tile_ys): (Vec<_>, Vec<_>) = red_tiles.to_owned().into_iter().unzip();
[INFO] [stdout]     |                                                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use: `red_tiles.iter().copied()`
[INFO] [stdout]     |
[INFO] [stdout]     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_to_owned
[INFO] [stdout]     = note: `#[warn(clippy::unnecessary_to_owned)]` on by default
[INFO] [stdout] 
[INFO] [stdout] 
[INFO] [stderr]     Finished `dev` profile [unoptimized + debuginfo] target(s) in 3.13s
[INFO] running `Command { std: "docker" "inspect" "74a2a7b26f3ec1b6f4429430dfc84bfda4c4a9f1d8754edb8c7646d3b267e917", kill_on_drop: false }`
[INFO] running `Command { std: "docker" "rm" "-f" "74a2a7b26f3ec1b6f4429430dfc84bfda4c4a9f1d8754edb8c7646d3b267e917", kill_on_drop: false }`
[INFO] [stdout] 74a2a7b26f3ec1b6f4429430dfc84bfda4c4a9f1d8754edb8c7646d3b267e917